X-BULL Pressure Washer Turbo Nozzle Head 4000PSI High Cleaner 1/4BSP

A standard fan tip spreads its energy across a wide arc, which is fine for dust on a bonnet and useless against moss in paver joints or set mud in a wheel arch. A turbo head spins a single pencil jet around a tight cone instead, so full pressure keeps landing on the surface while covering more ground than a fixed zero-degree tip.

Brass in the part that wears

The head is machined from brass rather than moulded from plastic, and the reason matters: the jet inside a turbo nozzle spins against its seat every second it runs, at working pressure. A soft body goes oval, the cone opens up, and the tool stops cutting. At 10 cm long it adds almost nothing to the end of a lance, the 2.5 mm orifice sets the flow it will pass, and the supplier rates it to a maximum of 4000 PSI with a noise level of 70 dB. Turbo heads are loud by design — that is the rotating jet, not a fault.

Key features

• Solid brass body: holds its bore under the spinning load that wears plastic heads out.
• Rotating pencil jet: covers a wider path than a fixed zero-degree tip.
• 2.5 mm orifice: the figure to match against your washer's output before ordering.
• 10 cm long: short enough not to unbalance a lance held at arm's length.

Specifications

• Type: turbo (rotating) nozzle head
• Material: brass
• Fitting: 1/4" BSP per the specification; the feature list instead describes a 1/4" quick-connect plug
• Nozzle diameter: 2.5 mm
• Maximum pressure: 4000 PSI (supplier's figure; basis not stated)
• Overall length: 10 cm
• Noise level: 70 dB
• Colour: blue

Check the connection before you order

• The supplier's information contradicts itself on the fitting: threaded 1/4" BSP in the specification, quick-connect in the feature list. The two are not interchangeable, and this is the most common reason a nozzle goes back.
• No compatibility with any washer brand is stated. Quick-connect standards differ between makes, so match the fitting on your own lance rather than assuming.
• Do not fit a nozzle to a machine putting out more than the nozzle is rated for, and keep the jet away from skin — a rotating pencil jet at this pressure will cut.

Worth having in the kit for jobs where the standard tips stop making progress.