X-BULL 4PCS Tyre Deflators Air Quick Deflator Adjustable 10~30 PSI Tire Valve

Airing down at a beach access track decides whether you float over the soft stuff or dig a trench in it. Done with a valve tool and a hand gauge it is ten minutes of squatting in the sand. A set of four preset deflators handles every corner at once while you sort the recovery gear.

Dial the figure in, then lock it there

Each unit is set by rotating the body until the scale shows the pressure you want, then tightening the locking ring so the setting cannot drift. Thread one onto each tyre, walk away, and they bleed down and stop. Adjustment runs from 10 to 30 PSI (0.7 to 2.1 BAR), which brackets the pressures most drivers use on sand, gravel and rock. Anything below 10 PSI sits outside their range, so very low crawling pressures still need a manual gauge.

Built to live in a wet recovery bag

Internal parts are stainless steel and the body carries a nickel-plated anticorrosive coating, which is aimed at salt spray and the fine grit that gets into everything travelling in a ute tray. They thread onto any standard Schrader stem, the same fitting used on 4WDs, trailers and camper tyres, and no tools are needed to change the setting. The supplied pouch has four separate pockets so they go back where they belong rather than rolling loose.

Key features

• Set of four: all corners deflate at the same time instead of one after another.
• Locking ring: holds the chosen PSI so the setting survives the trip out.
• Tool-free adjustment: the body rotates against a printed scale.
• Corrosion-resistant construction: stainless internals inside a nickel-plated shell.

Specifications

• Type: automatic tyre deflators
• Pressure range: 10-30 PSI (0.7-2.1 BAR)
• Materials: stainless steel internals, nickel-plated anticorrosive body
• Valve fitting: standard Schrader stem

What's in the box

• 4 x tyre deflators
• 4 x valve caps
• 1 x storage pouch
• 1 x packaging box

A small kit that saves the same ten minutes every trip.