Worgeous Kayak Valve Attachment Practical Air Plug Boat Plug Boat Drain Plug Structural Air Plug Inflatable Kayak Part Structural Valve

One grey POM valve for an inflatable boat, listed at 6.5 by 6.5 by 5 centimetres and named as both an air plug and a drain plug. The only sentence on the page that asks you to do anything says to connect the air plug to your pump and watch the kayak or fishing boat take shape. That describes inflating a boat. It does not describe fitting a valve to one, and nothing else on the page does either.

The instruction belongs to a different job

Read the description straight through and the procedure you are given is the procedure for using the boat once the valve is already in it. How the valve meets the fabric, what it threads or clamps into, what it seats against: none of that is described. The listing never uses the word install, and it names no part of the boat that the valve joins.

Nothing to hold against the valve you are replacing

Inflatable boat valves are not one pattern. This page carries no thread, no valve standard by name, no bore, no flange and no hole size, and its only figures are the outside of the part. The search summary calls it a direct-fit spare part. The description makes no fitment claim whatsoever, and nothing printed here could be compared with the fitting already bonded into your own boat.

Sealing claimed, never measured

The description says the plug features excellent sealing capabilities, preventing any gas leakage and maintaining optimal pressure. That absolute wording is the supplier's and we neither strengthen it nor adopt it as ours. A working pressure is never given, nor a burst figure, and no pressure unit occurs anywhere, so the claim has no number under it. There is also no warning on the listing, and no spare seal, O-ring or gasket is offered.

Key features

• One valve in the pack: a single valve is itemised, with nothing alongside it.
• POM body: POM is the material given, said to be built to last over extended periods.
• Grey: grey is the colour named; no other is offered.
• Air and drain in one part: the same item is called an air plug and a drain plug throughout the description.
• Works both ways: the description credits it with quick inflation and deflation.
• Craft types, not brands: rubber boats, kayaks and fishing boats are the craft it names, and no maker or model appears.
• Carrying weight: it is described as lightweight and compact, though a weight is never quoted.

Specifications

• Valves in the box: 1
• Plastic on the spec line: POM
• Colour of the valve: Grey
• Outside measurement: 6.50 x 6.50 x 5.00 cm
• Inches as supplied: 2.55 x 2.55 x 1.97 in

Read this before you order a replacement

• Thread, valve standard and fitting type are all unnamed, so nothing establishes that this valve will mate with your boat.
• The search summary's direct-fit claim is unsupported by the description, which claims no fit at all.
• Bore, hole size and flange diameter are all absent. The 6.5 by 6.5 by 5 centimetre figure is an outside measurement and settles nothing about the fitting.
• A working pressure never appears, and neither does a pressure unit, against an absolute sealing claim that we have quoted rather than taken on.
• No hull material is named, what the valve bonds or seals to goes unsaid, and no tool is named for fitting or removing it.
• Warnings, care lines and any instruction to check the seal are all absent, on a part that holds air in a craft you sit in.
• The valve's outside is quoted bare. No allowance, no variation and no give is stated against it anywhere on the page.
• Six and a half centimetres works out at 2.56 in rather than the 2.55 shown; the 5 cm figure converts cleanly. Centimetres are what we publish.
• Words are missing from three sentences: after an essential, after seasoned, and in a bullet reading various of inflatable boats where the feature line above it reads a variety of. Every one of them is a Loss, and no repair was attempted. A keyword string also spells lnflatable with a lower-case L where a capital I belongs, which is a Substitution.

This is a spare part sold to people whose boat is already leaking, and the one thing it will not let them do is check it against the valve they are taking out.

Returns, Refunds, and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.