Universal Car Roof Racks Pod Aluminium Cross Bars Clamps Lockable 90cm Black

Plenty of cars leave the factory with a completely bare roof — no rails, no tracks, nothing to bolt to. That rules out most racks on the shelf. This set clamps to the door frames instead, so a smooth-roofed sedan or SUV ends up with two 90 cm load bars and not a single hole drilled anywhere.

Clamped to the door frame, padded against the paint

Two different clamp and hook types are supplied, eight pieces in total, along with adjustable straps, so the rack can be matched to the shape of your door and window frames. Anti-scratch rubber pads and strips sit between the hardware and the bodywork, which is the part that decides whether the rack leaves a mark. Maximum fitting width including straps and clamps is 1370 mm. Nothing is drilled and nothing is cut, so the roof goes back to standard whenever you take the rack off.

Two load figures, and the difference matters

The supplier quotes a static loading capacity of up to 90 kg and a moving loading capacity of 45 kg to 75 kg, noting the range applies as car speed changes. Those are two different numbers for two different situations, and the moving figure is the one that governs a loaded car on the road. It is given as a range rather than a single value, so treat the lower end as the working number. Your vehicle's own roof limit applies on top of this, and the lower of the two is what counts.

Key features

• No rails needed: suits 4-door cars and SUVs with bare roofs.
• Two clamp types: eight pieces across two sets to match different door frames.
• Rubber pads and strips: prevent slippage and protect paintwork at the contact points.
• Locking system: two independent keys included.
• No drilling or cutting: the rack fits and removes without altering the vehicle.

Specifications

• Material: aluminium alloy and plastic
• Static loading capacity: up to 90 kg
• Moving loading capacity: 45 kg - 75 kg (supplier notes this varies as car speed changes)
• Maximum fitting width: 1370 mm, including straps and clamps
• Dimensions: 90 cm pole length x 5 cm x 10 cm
• Net weight: 3.5 kg
• Colour: black
• Assembly required: yes

What's in the box

• Car Roof Rack 900 mm pole length x 2
• Key x 2
• Clamp/Hook, 2 types x 2 sets (8 pcs total)
• User Manual x 1

Before you fit these

• Intended for bare roofs without rails; check the 1370 mm maximum fitting width against your vehicle before ordering.
• Work to the moving loading capacity, not the static figure, once the car is on the road, and check your vehicle's own roof load limit.
• Re-check clamp tension after the first trip and periodically thereafter.

A practical answer for a bare roof when a permanent rail system is not on the cards.

This product comes with 1 year warranty