Terminal Extractor - 18 pcs Terminal Removal Tool Kit - High Hardness - No Rust - No Deformation - Car Electrical

A reversing camera that cuts out over speed humps usually comes down to a single pin in a single connector, backed out a fraction and no longer gripping. Getting that pin out to reseat or replace it is where most people wreck the housing, because the locking tang sits inside the connector and a screwdriver only splits the plastic.

Push and pull, no prying

Each tool in this set is shaped to slide down beside a terminal and lift its locking tang clear, so the pin withdraws backwards through the connector body. The supplier is explicit that there is no need to prise the terminals open: push the tool in, draw the wire out. The working pins can be spread by hand to suit a slightly wider slot and spring back to shape afterwards, which is the difference between one tool serving several similar connectors and taking a permanent set on its first job.

Adding a circuit without cutting the factory loom

The reason to depin rather than splice is that the original harness stays whole. Withdraw the terminal, fit the wire your accessory needs into the vacant cavity, and the plug goes back together the way it left the factory — no scotch locks, no soldered joint under tape. Steel with a plastic shroud over the grip end gives the strip enough spring to flex and return. Permanent wiring changes to a vehicle remain work for a qualified auto electrician.

Key features

• Eighteen extractor shapes: eighteen tool types in the roll, aimed at car plug terminals.
• Adjustable working width: the pin width can be altered by hand and returns to its original shape afterwards.
• Shrouded grips: plastic over the handle end so a flat steel strip does not cut into your palm.
• Tarpaulin roll: the tools store together in a fabric bag, so a set stays a set.
• Nothing gets levered: the terminal is released and drawn back, never forced open.

Specifications

• Pieces: 18
• Material: steel with plastic handles
• Storage: tarpaulin bag
• Individual tool tip sizes: absent from the listing we received
• Overall dimensions and weight: unlisted

What's in the box

• 18 x terminal extraction tools
• 1 x tarpaulin storage bag

Match the tool to your connector

• Connector systems are specific. No connector families or brands are named for this set, so hold the tips against your own plug, or measure the terminal cavity, before ordering.
• Sets claiming to suit every connector do not survive a modern loom. Where your vehicle uses a proprietary release, check a matching shape is present.
• Household appliances appear in the supplier's wording. Read this as an automotive tool for low-voltage vehicle wiring; do not take it near mains-connected equipment.

Kept in the toolbox drawer, it turns a butchered connector into a five-minute job.

Returns, Refunds and Replacements

Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

• For customers in Victoria, approximately 7-10 working days;
• For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
• For customers in WA, NT, and TAS, approximately 9-12 working days.