T-Rex 1180kg Set of 2 Vehicle Positioning Jacks, Mechanical Ratcheting Foot Pedal Wheel Dolly For Auto Car Moving

Two of the four size-and-weight figures on this page say which jack they belong to and two of them do not. Product Weight is written as 16kg (per jack) and Carton Weight as 20kg (per jack); the two dimension lines sitting between them, 61 x 61 x 21cm for the jack and 61 x 63 x 22cm for its carton, carry no such note. A set of two arrives here, so that qualifier is the difference between clearing space for one box and clearing space for two, and the page attaches it to the weights only.

Lifting a single wheel with a boot on a pedal

Each unit takes a single wheel. You roll it up to the tyre, work the foot lever, and a ratcheting mechanism worked through a wide rubber tread raises that corner clear of the floor onto castors, so the car, the boat trailer or the bike can be pushed sideways with nothing under the chassis. The pair is given 1180 kg of axle weight between them. The tyre limit is given as 275mm in a bullet and again in the specification, and as a 275 series width in the opening paragraph, and the listing never says whether those two name the same measurement.

Four castors, two locks, and a bare number where a size belongs

Nylon castors on needle bearings carry each jack and the page says two of them lock, without saying which two or what the lock is. The specification line for their size reads Diameter of Castor: 4, and the 4 stands with no unit after it. Four inches and four centimetres are more than sixty millimetres apart on a wheel this small, so the figure is published here exactly as it stands and no unit has been supplied for it.

Key features

• Foot-pedal ratcheting lift: the lever is worked with a boot rather than a handle, so both hands stay free to steer the wheel.
• Non-slip pedal pad: a large rubber face on the lever, described as the surface you push against.
• Axle rating for the pair: 1180 kg between the two units, stated in the prose, in a bullet and in the specification alike.
• Steel frame and rollers: the load-bearing parts are steel and the wheels are nylon, and the page separates the two.
• Needle-bearing castors: the bearing type is named where most listings name only the wheel material.
• Carry handle on each unit: the listing describes moving the jacks about by hand between jobs.

Specifications

• Brand as listed: T-Rex
• Model as listed: H13
• Axle capacity, pair: 1180 kg
• Materials as the supplier sets them out: steel for the frame and the rollers, nylon for the wheels
• Maximum tyre size given: 275mm
• Castor diameter as stored: 4, with no unit
• Jack size, unqualified: 61 x 61 x 21cm (W x L x H)
• Jack weight, per jack: 16kg
• Carton size, unqualified: 61 x 63 x 22cm (W x L x H)
• Carton weight, per jack: 20kg
• Units in this order: 2 x T-Rex H13 Vehicle Positioning Jacks

Before you put a car on these

• A standard is absent. So is an approval, a certification and a working load limit. The 1180 kg is offered as a capacity, with no word on whether that means a rating, a ceiling or a tested result.
• Floor type, gradient and slope limit are all absent, though the opening paragraph does claim smooth rolling over a range of surfaces.
• Lift height is absent. How far a wheel comes up is a figure this description leaves out entirely.
• A caution against working beneath a vehicle standing on these is absent. It has not been softened; it simply is not here, and we have put none in its place.
• A user manual is said to be accessible online and minimal assembly is said to be required. An address for the first is absent, and any account of the second is absent too.
• An optional storage rack is offered separately. A model for it is absent, as is a code and any measurement.
• A margin of error is absent from every number in the blocks above. The supplier states none, and we have fetched none from anywhere else to stand in.
• Three apostrophes have been lost out of the stored text, two from contractions in the second paragraph and one from a possessive in the fourth. Not a single apostrophe survives elsewhere in this description, so nothing within it stands as an intact comparison. The broken words are not repeated above.
• A warranty is absent, a guarantee is absent, the brand name is the only maker information offered, and the country of build is absent as well.

Two units, one wheel each, and the numbers to plan around are per-jack numbers whether the page labels them that way or not.

We accept Change of Mind returns for 14 days after you have received the item in cases where you have changed your mind or made an incorrect purchase and wish to return the product. This also applies to orders canceled when the item has already been dispatched from our warehouse. The item must be in a re-saleable condition to qualify for a change of mind refund. Deductions may apply including Initial and Return Shipping, as well as restocking fee of 10% of the product price