Seat Covers for MAZDA BT-50 TF XT DUAL CAB 07/2020 - ON PREMIUM BLACK

The TF generation BT-50 arrived in July 2020, and its cabin and seat shells are its own — nothing cut for an earlier BT-50 will sit correctly on them. These Premium black covers are patterned for the front and rear seats of the 07/2020-onward TF dual cab, in XT specification.

The date range in this listing is not consistent

The title says 07/2020 and on, with no closing date. The supplier's own opening line narrows it to 2020–2022. Those are different claims, and the safer reading is the title's: 07/2020 onward for the TF. If your BT-50 was built in 2023 or later, ask the seller to confirm the seat pattern has not changed before you order, because that gap is exactly where an unnoticed revision would sit.

Jacquard front and back, not just on the face

What the supplier calls the Premium Plus construction uses jacquard for the backing and side skirting as well as the visible face, rather than pairing a nice-looking face cloth with a plain synthetic underside. The knit breathes, so the seat does not hold heat against you the way a solid-backed cover can. High-density polyurethane foam sits behind it for padding, body and thermal insulation. Storage pockets are fitted front and rear, and the supplier applies a Smart Guard treatment it describes as resisting stain, water and UV light, and calls the fabric water resistant — its claims, unaccompanied by any test data.

Both rows, headrests included

This one is listed as covering front and rear seats with the headrests, so a single order does the whole cab. Trims named are TF and XT. Check your own seats against the photos, particularly the rear bench split and whether yours has a centre armrest, since that is where a pattern most often fails to match.

Key features

• Whole-cab coverage: front and rear seats plus headrests in one pack, per the supplier.
• Jacquard throughout: the knit is used on the backing and skirting, not only where it shows.
• Breathable face: a knitted structure moves air instead of sealing heat against your back.
• Foam-backed: high-density polyurethane for cushioning and a thermal barrier.
• Pockets at both rows: storage front and rear rather than on one seat back only.

Specifications

• Vehicle: Mazda BT-50 TF, XT
• Build dates (title): 07/2020 onward
• Build dates (supplier body text): 2020 to 2022 — narrower than the title
• Cab configuration: dual cab
• Seats covered: front and rear including headrests
• Cover colour: black
• Product line: Premium
• Face cloth: jacquard
• Reverse and skirting: jacquard as well, over a high-density polyurethane foam core
• Finish claims, as worded by the supplier: water resistant, with a Smart Guard treatment against stain, water and UV light
• Pockets: fitted at both rows
• Installation: supplier states professional installation is not required
• SKU: V121-PMEBT50104
• Weight and packed dimensions: not stated anywhere in the supplier data

Before you fit these

• Airbags: check whether your front backrests carry a seat-mounted airbag. On this body style the module usually sits in the outboard edge and opens through a seam made to tear at a set load. The supplier names no standard, publishes no test and identifies no certifier, so we make no compatibility claim in either direction. Get it checked by whoever sells you the set, or by a trim shop, ahead of fitting, and keep the airbag warning tag on show.
• Later builds: the two date ranges in the source do not agree; verify before ordering if yours is a 2023 or newer TF.

Check your seat configuration and build month against the listing first — that is the difference between a set that sits properly and one that goes back.