Seat Covers for MAZDA BT-50 B22P/Q-B32P/Q UP SERIES 10/2011 ? 2015 SINGLE CAB CHASSIS FRONT BUCKET + _ BENCH GREY PREMIUM

A single cab BT-50 has one row and no back seat, which changes what a cover set has to do. There is no bench behind you to protect and no split-fold to work around. What matters instead is the shape of the two seats up front, because a single cab does not run a matched pair.

What single cab chassis rules in and out

Cab chassis means the tray or body sits behind the cab rather than forming part of it, and the cab carries one row of seating. Dual cab, freestyle cab and extra cab BT-50s are different vehicles for covering purposes and are not what this pack was cut for. The grade named by the supplier is XT. Check your build plate for series and grade before ordering: BT-50 seat trim varies across the range, and a cover cut for one layout will not sit right on another.

Bucket one side, bench the other

The title reads front bucket plus bench, and that layout is worth understanding. One side is an individual sculpted seat with its own backrest and side bolsters. The other is flatter and wider, without the same shaping. A set cut for that combination carries two different panels rather than two of the same. Open the driver's door and look across. One seat moulded to a single occupant, one flat and wide, and the description matches. Two separate buckets means a different set.

Key features

• Two seat shapes: the bucket and the bench are covered by different panels, not a mirrored pair.
• Jacquard fabric: the supplier's stated construction, a breathable knitted cloth.
• Water resistant: spills are shed; nothing in the supplier data supports a waterproof claim.
• Foam backing: high-density polyurethane behind the face cloth, credited by the supplier with comfort, strength and thermal insulation.
• Smart Guard treatment: the finish the supplier names for stain, water and UV resistance.

Specifications

• Vehicle: Mazda BT-50 B22P/Q-B32P/Q UP Series, single cab chassis
• Years: 10/2011 to 2015 per the title; the supplier's body text says 2011 to 2016 — see the fitment note below
• Grade listed: XT
• Seat configuration: front bucket plus bench
• Colour: grey
• Face fabric: jacquard, breathable knitted
• Backing: heavy-duty polyester carrying a high-density polyurethane foam layer
• Water: resistant, in the supplier's wording
• Airbags: the supplier lists these covers as airbag compatible
• Fitting: no professional installation required, per the supplier
• SKU: V121-PMTMBT0607
• Panel count, dimensions: absent from the supplier data

What's in the box

• Cover for the bucket seat
• Cover for the bench section
• Headrest covers

Before the covers go on

• Two year ranges, and they disagree. The title states 10/2011 to 2015. The supplier's own description says 2011 to 2016. Both are published here; we go with the title. If your BT-50 was built in 2016, contact us before ordering rather than assuming it is covered.
• The title contains a corrupted character between the plus sign and the word bench, where a fraction should appear. Treat the configuration as front bucket plus bench and confirm against the photos.
• Airbags: compatibility is stated by the supplier, with no tear seam or release stitching described. Look at the airbag labelling on your own seats first, and have a qualified person do or inspect the job before the ute is driven again.

Grey, cut for the single cab layout, and priced as one set for the whole cab. Check your series and build date against the title above and it is a straightforward job.