Seat Covers for MAZDA BT-50 B22P/Q-B32P/Q UP SERIES 10/2011 ? 2015 SINGLE CAB CHASSIS FRONT BUCKET + _ BENCH BLACK CHALLENGER

Black Challenger canvas for the Mazda BT-50 UP series single cab chassis, B22P/Q to B32P/Q, built 10/2011 to 2015, in the bucket plus three-quarter bench layout. A single cab has no back seat, so the passenger side ends up doing the job of one: folders, a lunchbox, a cordless drill, all of it riding on the trim.

The passenger seat is your shelf, and it shows

Nobody plans it. There is simply nowhere else. The tool case goes on the bench because the tray is loaded, the clipboard slides under it, a bag of fittings tips out somewhere between the yard and the job. Hard plastic corners and metal edges do to woven trim exactly what you would expect, and the damage is concentrated because it always lands in the same spot. Cotton canvas is the face material on this range, chosen for exactly that duty, and the supplier rates it water resistant and UV resistant — resistant, in both cases, with nothing in their data supporting a waterproof claim.

Two corrupted characters in the title

The listing title carries damage from the supplier's feed and it is worth translating before you order. The question mark between 10/2011 and 2015 is a dash: the year range is 10/2011 to 2015. The underscore before the word BENCH is a fraction, three-quarters, so the configuration reads front bucket plus three-quarter bench. One sculpted seat, one wider flatter section beside it, headrest covers with them. The title itself has been left alone; only the reading of it is corrected here.

Single cab on the title, dual cab underneath it

The supplier's opening sentence describes this as made to fit a BT-50 UP series dual cab. The title says single cab chassis, and the pack contents — front seats and headrests, nothing more — are consistent with a single cab rather than a dual. The title has been published and the conflict is recorded rather than quietly resolved. The only grade named in the source is XT. Check your build plate for series and grade, and ask us to verify against SKU V121-CHTMBT0604 if anything about your cab does not match.

Key features

• One-row set: covers the bucket, the bench section and their headrests.
• Cotton canvas face: the supplier's stated material for the Challenger range.
• Water and UV resistant: both claimed by the supplier for this cloth.
• Foam-backed: a high-density polyurethane layer sits behind the canvas.
• Skirted sides: heavy-duty polyester where the cover wraps around the frame.
• No trimmer needed: professional installation is not required, in the source's words.

Specifications

• Vehicle on the title: Mazda BT-50 B22P/Q-B32P/Q UP series, single cab chassis, 10/2011 to 2015
• Vehicle in the supplier's description: BT-50 UP series dual cab, 2011 to 2015 — at odds with the title
• Grade named: XT
• Configuration: front bucket plus three-quarter bench
• Range: Challenger
• Colour: black
• Material: cotton canvas
• Padding: polyurethane foam, high density
• Edging: heavy-duty polyester used for the backing and the side skirts
• Airbags: the source describes the covers as airbag compatible
• SKU: V121-CHTMBT0604
• Piece count, panel measurements, care advice: the supplier publishes none of these

What's in the box

• Cover for the bucket seat
• Cover for the three-quarter bench
• Headrest covers

Sort these out first

• No rear pocket. The supplier's generic feature list includes a rear pocket. A single cab has no rear seat for one to be fitted to, so that line has not been carried onto this page. Storage on the front seat backs is the most that can be confirmed.
• Cab type. Title and description disagree. Order on the title, and check with us if your BT-50 is a dual cab or a freestyle cab.
• Airbags. Compatibility is asserted in the supplier's bullet list and left there — no tear seam explained, no standard quoted, no test referenced. It is their claim, repeated, not verified. Check the outboard side of your own seat for an airbag tag before fitting, and if one is present, have the job done or reviewed by a qualified person.

A one-row cab is the quickest set to fit in this range. Read the plate, confirm the layout and it will be on before lunch.