Seat Covers for HOLDEN CAPTIVA CG MY07 - MY09 SERIES 09/2006 - 08/2009 CGII MY16 - MY18 02/2016 - ON 4X4 SUV/WAGON 5 SEATERS FR GREY EL TORO

Two year spans sit in this listing's title, split by a gap of more than six years, and the grey El Toro covers they belong to are cut for the front buckets and rear bench of a five-seat Captiva. Sort the dates first. An early CG and a late CGII are different cars with different seats.

Two year spans, and the years that fall between

The covered windows are the Captiva CG MY07–MY09 series, 09/2006 to 08/2009, and the Captiva CGII MY16–MY18 series, 02/2016 onward. Those two are the whole of it. A Captiva built between 09/2009 and 01/2016 is not covered by this listing and the supplier publishes no fitment for those model years. Grades named are Maxx, SX and LS5, in the 4x4 SUV and wagon body with five seats. Read the build date off the compliance plate.

Front buckets, lumbar adjusters and the airbag wording

The front half suits two bucket seats with two separate headrests, and the supplier marks those bucket covers with the phrase "Airbag Certified Compatibility", reproduced here exactly as given. No standard is named, no tear seam described and no test result attached, so it stands as a supplier statement and not as an assurance about deployment. A second note offers two optional driver seat panels shaped around a lumbar adjuster — if that seat has a lumbar wheel or switch, confirm which version ships.

A 40/60 rear backrest with an armrest provision

Rear covers are made for a 40/60 split backrest with an armrest provision and three separate headrests, plus a recess-down headrest note pointing at a fitting diagram and an optional two- or three-headrest provision. Establish what your car has: whether the centre headrest is fitted or stowed, whether the armrest folds out of the wider section, and where the child restraint anchors sit. Each section still has to fold on its own afterwards.

Key features

• Soft PVC automotive-grade fabric: described by the supplier as hard wearing with leather-like grains, finished black with a grey inlay centre.
• Smart Guard badge: stain and water resistant, UV stabilised — which is what stops a light inlay panel marking on the first spill.
• 6 mm foam with tri-coat net lining: the lining exists to stop foam breaking down against the car's own upholstery.
• Two tie systems: velcro at the front, high-strength stretch and elastic ties at the rear, over a double knitted polyester backing.
• Pockets: a rear map pocket and utility pockets on the front seats.

Specifications

• Fitment, first span: Holden Captiva CG MY07–MY09 series, 09/2006 – 08/2009
• Fitment, second span: Holden Captiva CGII MY16–MY18 series, 02/2016 – on
• Years not covered: 09/2009 to 01/2016
• Body and seating: 4x4 SUV / wagon, 5 seater
• Grades: Maxx, SX, LS5
• Coverage: front and rear
• Fabric: soft PVC, automotive grade
• Colour: grey inlay centre with black surround
• Foam thickness: 6 mm
• Rear backrest: 40/60 split with armrest provision
• Airbag: the front bucket covers are marked "Airbag Certified Compatibility" by the supplier; no standard, test or tear seam named
• Warranty: 2 years workmanship, per the supplier
• Dimensions and pack weight: not published

What's in the box

• 2 x front bucket seat covers
• 2 x separate front headrest covers
• 2 x optional driver seat panels to suit a lumbar adjuster, per the supplier's note
• Rear 40/60 split covers with armrest provision
• 3 x separate rear headrest covers, with an optional two- or three-headrest provision noted

Before you fit these

• Confirm the build date falls inside one of the two spans. Anything from 09/2009 to 01/2016 sits outside this listing.
• Five-seat body only; a seven-seat Captiva is not catered for.
• Settle the lumbar-adjuster and headrest options with the supplier first, since both are described as optional rather than standard.
• The airbag wording belongs to the supplier. Have covers near an airbag fitted by a qualified person and the car checked before road use.

Check the plate, count the headrests, decide on the lumbar option, and both rows are covered in grey. We can chase the supplier for the fitting diagram before you commit.