Rexka 5pcs M14-20 Radiator Drain Plug Cock Petcock for Toyota Honda Suzuki Mazda Mitsubishi GM Isuzu Subaru

A drain cock that weeps after every coolant change is a familiar annoyance — a few drops on the crossmember, a stain that comes back a week later, and a tap that never quite closes the same way twice. Five plugs in this pack, thread written M14-20, overall length 39.5 mm.

Two figures, and nothing else published

Thread size and overall length are the entire specification. No material, no drive type, no colour, and no mention of a washer, an O-ring or a taper. That absence matters more than usual on this particular part, so it is stated plainly rather than glossed over: nothing here is offered as a sealing component. Whether your plug seals on a washer, an O-ring or the thread itself is something to establish from the vehicle before ordering, and whatever seal the old one used may need to be renewed separately.

The supplier's own caveat, in its own words

Its description closes not with a claim but with a warning: "The Models May be Not Specfic to Your Model,Please Check and Comfirm The Sizes Before You Buy". Typos included, that line is worth more than the model list above it. That list spans Honda, Acura, Chevrolet, Dodge, Chrysler, Eagle, Geo, Isuzu, Lexus, Mazda, Mitsubishi, Plymouth, Ram, Scion, Subaru, Suzuki and Toyota with no years attached anywhere, and several entries are visibly mistyped. Take the thread and the length off the plug you are replacing.

Key features

• Five per pack: spares for a job that tends to be done more than once.
• M14-20 thread: the designation as the supplier writes it, unconverted.
• 39.5 mm overall length: the second of only two figures published.
• Broad platform coverage: a common petcock pattern across many Japanese and American models.

Specifications

• Quantity: 5 pieces
• Thread size: M14-20, exactly as stated
• Overall length: 39.5mm
• Material, finish and drive type: not published
• Washer, O-ring or seal: none listed as included
• Torque figure: not published
• Years: not published for a single vehicle listed
• Stated fitment, part one: Honda Accord, Civic, Civic Del Sol, Cr-v, Element, Odyssey, Passport, Pilot; Acura Cl, Mdx, Rdx, Rl, Rsx, Tl; Chevy Metro, Tracker; Dodge Dakota, Avenger, Colt, Neon, Stealth, Stratus; Chrysler Sebring; Eagle Summit, Talon, Tracker; Geo Metro; Isuzu Amigo, Impulse, Pickup, Rodeo, Redeo Sport, Stylus
• Stated fitment, part two: Lexus Es250, Es300, Es330, Gs300, Gs400, Gs430, Gx470, Is300, Ls400, Ls430, Lx450, Lx470, Rx300, Sc300, Sc400; Mazda B220, B2600, Protege, Protege5; Mitsubish 3000gt, Diamante, Eclipse, Endeavor, Expo, Expo Lrv, Galant, Mirage, Montero, Montero Sport, Raider; Plymouth Colt, Laser, Neon; Ram Dakota; Scion Tc, Xb, Xa; Suzuki Aerio, Esteem, Grand Vitara, Samurai, Sidekick, Swift, Vitara, X-90, Xl-7
• Stated fitment, part three: Subaru Justy; Toyota Camry, Corolla, 4runner, Avalon, Celica, Cressida, Echo, Fj Cruiser, Highlander, Land Cruiser, Matrix, Mr2 Spyder, Paseo, Prvia, Rav4, Sequoia, Solara, Supra, T100, Tercel, Tundra

Cooling system cautions

• A cooling system holds hot liquid under pressure. Work on it only when the engine is cold, and never open a radiator or a drain point on a warm engine.
• No sealing washer or O-ring is listed as included, and no claim is made that these plugs seal, are reusable, or suit repeated opening. Establish what your vehicle uses first.
• No torque figure is published. Overtightening a plug into a plastic radiator tank is a common way to turn a weep into a replacement radiator, so use the vehicle's own specification.
• The supplier's own text warns that the models listed may not be specific to yours. Check thread and length against the plug you remove.
• Refill with the coolant type the manufacturer specifies, bleed the system, and check for leaks before driving.

Five is a sensible number for a part that is cheap, easily cross-threaded, and always needed on a Saturday.

Returns, Refunds, and Replacements

Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

For customers in Victoria, approximately 7-10 working days;
For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
For customers in WA, NT, and TAS, approximately 9-12 working days.