Portable Loading Ramps, 2 Pcs 1200 x 215 mm, Durable Aluminum Shed Ramp Set with Anti-Slip Holes, Compact Design and Easy Storage, 399.2 kg Weight Capacity, for ATV, Tractors, Lawn Mowers, Carts

The step at a shed or garage door is rarely more than a stair's worth of height, but it is enough to stop a wheelbarrow dead and turn walking a mower in and out into a daily annoyance. This pair of short aluminium ramps is built for that job specifically: bridging a low step, not reaching up into a truck bed.

Sized for steps, not truck beds

This is the limit worth understanding before buying. The supplier states the set is ideal for steps with a small height difference and explicitly not suitable for transferring equipment onto trucks. Each ramp measures 1200 x 215 mm, quoted elsewhere in the same listing as 47.2 x 8.5 inches, which is short enough to sit at a sensible angle over a doorway lip and far too short to reach a tray. Used as intended it turns a lift into a push, for hand trucks, mowers, snow blowers, bicycles and light ATVs moving into sheds, barns and garages.

Traction from the holes, not a coating

Rather than a painted grit finish that wears off under tyres, the deck is perforated with dense anti-slip holes. Each hole edge gives a tyre something to bite on, and water runs through instead of sitting on the surface, so a wet morning does not turn the ramp into a slide. The alloy is professionally welded and resists bending under repeated crossings, and at 5.3 kg (11.7 lbs) per ramp the set moves with one hand. Wide flat claw plates at the front end sit hard on the ground rather than rocking underfoot.

Key features

• Perforated deck: hole edges add grip and let rain drain straight through.
• Flat claw plates: a wide foot at the front stops the ramp rocking on a hard floor.
• Screw-down option: screws are supplied so a ramp can be fixed in place or hung up for storage.
• 5.3 kg per ramp: light enough to set out and put away without help.
• Two-ramp set: covers both wheel tracks on a mower, cart or hand truck.

Specifications

• Material: high-grade aluminium alloy, professionally welded
• Ramp size: 1200 x 215 mm each (47.2 in x 8.5 in)
• Ramp weight: 5.3 kg (11.7 lbs) each
• Load capacity: 880 lbs (399.2 kg) as quoted by the supplier, basis not stated
• Tread: dense anti-slip perforations
• Not suitable for: transferring equipment onto trucks, per the supplier
• Set: 2 ramps

What's in the box

• 2 x aluminium shed ramps
• Fixing screws

Before you fit these

• The supplier quotes 880 lbs (399.2 kg) but does not say whether that is per ramp or for the pair. Work to the lower assumption.
• Stated as unsuitable for loading equipment onto trucks. Keep it to low steps.
• The listing also recommends a minimum height of 300 mm (11.8 in), which sits oddly against the small-step description in the same text. Check the height you actually need to bridge.

A practical fix for shed doorways, workshop steps and the lip into a garage. Measure the step, confirm the load, and this set does the rest.