Pieces Tire Valve Rallonge, 45 Degree, 90 Degree, 135 Degree Extension Valve Tire of Adapter Connector Prolongateur Coude

Tyres lose pressure whether or not anyone checks them, and checking is exactly what gets skipped when the valve is buried behind a spoke or facing the wrong way on an inner wheel. This six-piece set of brass extensions brings the valve out into the open, in three bends so one of them clears your particular rim.

Brass, a seal and a valve core in each one

Every extension is turned from brass and carries its own rubber seal, with a valve core fitted inside rather than depending only on the core in the wheel. That is what lets the supplier state you can inflate, deflate and check pressure through the extension, so the fitting stays where it is between checks instead of coming off each time. Metal dust caps are supplied to keep grit out of the outlet.

45, 90 and 135 degrees, two of each

Three bends cover three problems. A 45 clears a spoke that only just gets in the way. A 90 pushes the valve straight out through the face of a deep rim. A 135 turns back on itself for a valve pointing away from you, as on the inner tyre of a dual axle or a caravan rim. Two of each means a full set on one vehicle, or a mixed selection spread across a few.

Key features

• Six pieces, three angles: 2 x 45 degrees, 2 x 90 degrees, 2 x 135 degrees.
• Valve core in each extension: inflate, deflate and check pressure without taking it off.
• Standard valve fitment: the supplier names cars, bicycles, trucks, motorcycles and recreational vehicles.

Specifications

• Set quantity: 6 pieces (2 x 45 deg, 2 x 90 deg, 2 x 135 deg)
• Material: brass, with rubber seal and metal dust cap
• Valve core: fitted in each extension
• Compatibility: standard tyre valves, in the supplier's wording
• Length of each angle: not published by the supplier
• Thread size: not published by the supplier

Worth knowing before you order

• No dimensions are given: the supplier publishes no lengths or thread sizes for this set. Where clearance behind the wheel is tight, measure against the photos first.
• Check every joint: an extension adds a sealed connection to a pressurised tyre. Soapy water over each fitting after installation will find a slow leak immediately.
• Reset and recheck: set each tyre to the placard pressure with the extension fitted, then check again the following day.

Cheap enough to leave fitted permanently, which is the only way pressure checks actually get done.

Returns, Refunds and Replacements

Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

• For customers in Victoria, approximately 7-10 working days;
• For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
• For customers in WA, NT, and TAS, approximately 9-12 working days.