Offset Spark Plug Boot Removal Plier - 5/8" Opening, 11" and 16" Length, Offset Tip for Tight Spots, Protects Wire Boots

Ignition boots bake onto a plug insulator and then refuse to move. Haul on the lead by hand and the boot tears or the wire pulls out of its crimp; lever underneath with a screwdriver and the porcelain cracks. Jaws sized to grip the boot itself take it off in one clean movement instead.

The 5/8 inch opening is the whole specification

Jaw opening is what separates a boot plier from an ordinary pair of pliers, and the published figure here is 5/8 inch. That size closes around a spark plug wire boot and grips it right around its circumference rather than pinching it flat in two places. Spread across the boot like that, the pull travels straight up the axis of the plug, which is what stops the rubber tearing at its seam and stops the lead separating from the terminal inside.

Eleven inches and sixteen, and why both are in the pack

Two tools are supplied, given as 11 inches and 16 inches long. The shorter one suits a plug you can reach over the rocker cover; the longer one drops down between a plenum and a strut tower to a plug you cannot actually see. Length also buys leverage, and on a boot that has sat undisturbed for six years leverage is the difference between it releasing and the tool skidding off. Both carry an offset tip, angled so the jaws can come at a plug well from the side instead of demanding straight-down access.

Key features

• Two lengths supplied: 11 inches for open access, 16 inches for buried plugs.
• 5/8 inch jaw opening: sized around the boot rather than the lead.
• Offset tip: approaches a plug well from an angle when there is no room above it.
• Even grip: the jaw wraps the boot instead of pinching two points.
• Compact pair: both fit in a drawer without taking a tray to themselves.

Specifications

• Quantity: 2 pliers
• Jaw opening: 5/8 inch, as published
• Lengths: 11 inches and 16 inches, as published
• Tip: offset
• Material: not published
• Handle finish or grip material: not published
• Weight: not published
• Vehicle fitment: none stated by the supplier

What's in the box

• 1 x 11 inch offset boot plier
• 1 x 16 inch offset boot plier

Handling notes

• No vehicle fitment is published and none is claimed here. The 5/8 inch opening is the only figure to compare against the boots on your own engine.
• No material or handle specification is published. Nothing states a steel grade or any insulation rating, so do not treat these as insulated tools.
• Ignition systems carry high voltage. Work with the engine off and the ignition switched out.

Two lengths, one jaw size, and a straightforward job made considerably less destructive.

Returns, Refunds, and Replacements

Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

For customers in Victoria, approximately 7-10 working days;
For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
For customers in WA, NT, and TAS, approximately 9-12 working days.