High Pressure Sprayer Nozzle Connectors, M14 Thread, 1/4 Quick Connector, Hose Connection Parts, Snow Foam Bottle

Every time a threaded pressure washer fitting comes apart it wears a little, and sooner or later it weeps. Swapping between a gun, a turbo nozzle and a foam lance three or four times during one wash is exactly the pattern that finishes threads off early.

Push, click, done

This pair converts an M14 thread to a 1/4 inch quick connect. Screw the male and female halves on once, and from then on everything changes over by pulling a collar rather than turning a thread. A ball lock pin holds the joint together, which is what stops a lance walking loose under load. The supplier's own wording is that these are particularly suited to setups where connectors are frequently screwed and unscrewed.

Brass and steel where it counts

The halves are described as solid brass and steel. Brass matters on a fitting that lives wet, because it does not seize the way plated steel does after a season of hard water, and it tolerates repeated coupling without the sealing face going out of round. The supplier quotes a maximum working pressure of 5000 PSI. That figure is theirs, reproduced as published, and no bar equivalent is given.

Key features

• Pair of halves: one M14 male and one M14 female, so both ends of a joint are covered.
• 1/4 inch quick connect: tool-free changes between guns, nozzles and lances.
• Ball lock pin: positive mechanical retention rather than friction alone.
• Solid brass and steel: chosen by the supplier for a fitting that stays wet.

Specifications

• Thread: M14
• Quick connect size: 1/4 inch
• Material: solid brass and steel, per the supplier
• Maximum working pressure: 5000 PSI as stated by the supplier; no bar figure published
• Retention: ball lock pin

What's in the box

• 1 x M14 male connector
• 1 x M14 female connector

Confirm your thread first

• M14 is common on domestic machines but it is not universal. Check what is actually on your gun and hose before ordering.
• The supplier calls these universal and suitable for most pressure washers but names no brand. Quick-connect and thread standards differ between manufacturers, so match them to your own machine rather than assuming.
• The 5000 PSI figure is the supplier's stated maximum. It is not a recommendation to run your machine at that pressure.

A small spend that stops the fittings supplied with the machine wearing out first.

Returns, Refunds and Replacements

Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

• For customers in Victoria, approximately 7-10 working days;
• For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
• For customers in WA, NT, and TAS, approximately 9-12 working days.