H7 Car Headlight Mini LED Lamp Bulbs Car Headlight Kit 6000K LED Lamp 2 pcs

Halogen headlights fade long before they fail, and the first sign is usually a stretch of unlit road at the edge of the beam. This pair of H7 LED globes swaps into the existing housing in place of the halogens, using an all-in-one body sized to match the globe that comes out.

Sized to the globe it replaces

The driver electronics sit inside the globe body rather than in a separate box zip-tied behind the headlight, and the supplier describes the profile as a 1:1 match for the original halogen. That matters more than it sounds: most retrofits come unstuck at the dust cap, where an oversized heat sink or a dangling driver stops the cover seating again. The supplier quotes around ten minutes for the swap, which is realistic on a car with clear access behind the headlight.

Heat is what ends an LED globe

A halogen sheds heat forward through the glass; an LED pushes it backwards into its own base, and a globe that cannot move that heat away dims and dies early. The body here is aluminium with a hollow-carved heat sink and a fan drawing air across it. The supplier rates it at IP68 with a working range of -40 to 105 degrees Celsius, which covers an engine bay on a summer afternoon.

Key features

• H7 fitment: this listing is the H7 globe. The supplier also names H1, H4 and H11, but those are separate parts and this is not a multi-fit globe.
• All-in-one body: no external driver box to find a home for behind the headlight.
• Active cooling: fan and carved heat sink instead of a passive braid.
• Aluminium construction: conducts heat off the LED far better than a plastic base.
• Sealed to IP68: the supplier's rating, which matters where the headlight backing is vented.

Specifications

• Fitment: H7
• Quantity: 2 globes
• Voltage: DC 9-36 V
• Power: 38 W, described by the supplier as theoretical power; the basis is not stated
• Colour temperature: 6000 K per the title (the supplier's specification block prints this as "6000LM", which appears to be an error in the source)
• Light source: COB / DOB LED chip
• Beam angle: double sided
• IP rating: IP68
• Working temperature: -40 to 105 degrees Celsius
• Material: aluminium
• Lifespan: the supplier states 50,000 hours in one place and 100,000 hours in another, so no figure is published here
• Lumen output: not published

What's in the box

• 2 x LED headlight globes

Before you fit these

• This is an LED retrofit into a housing designed around a halogen filament. An LED emitter does not sit exactly where a filament sat, and beam pattern, cut-off and glare depend on the specific housing. Check the beam against a wall before driving at night, and confirm the requirements that apply to your vehicle and state before fitting for road use.
• Colour temperature at 6000 K is in the range where restrictions on the visible colour of forward-facing lighting become relevant. Those restrictions vary by state.
• Confirm your vehicle actually uses an H7 globe before ordering. Handle the new globe by its base rather than the lens.
• The supplier notes that measurements may vary by 1-3 cm and that colours may look different on screen.

A direct H7 replacement supplied as a matched pair, so both sides get changed together.

Returns, Refunds and Replacements

Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

• For customers in Victoria, approximately 7-10 working days;
• For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
• For customers in WA, NT, and TAS, approximately 9-12 working days.