Cordless Handheld Vacuum & Air Duster with Dual Suction/Blow Modes, Transparent Dust Cup, USB-C Charging, and 7 Interchangeable Nozzles for Car, Keyboard, and Home Cleaning (Grey)

Crumbs down the side of a seat rail, lint in a door pocket, dust packed between keyboard keys — none of it is a job for a full-size vacuum, and the extension wand never reaches anyway. This is a handheld that switches between drawing air in and pushing it out, with seven nozzle shapes to suit the gap you are working in.

No suction figure is published anywhere

Worth saying up front, because this is the number handheld vacuums are usually sold on and it is routinely inflated. The supplier states no pascal or kilopascal figure at all for this unit, and none is invented or estimated here. What it does state is the intended scope: dry, loose particles — crumbs, lint, light debris on dashboards, desks and car interiors. It is explicitly not for liquids, sand or large solids, which will clog the passage or load the motor. Judge it on that scope rather than on a suction number nobody has published.

Blow mode reaches what suction cannot

The side button switches the airflow direction, and that is more useful than it sounds. Suction works where a nozzle can seal against the debris. Blowing works where it cannot — down between keys, into a vent louvre, along a seat rail seam — and it moves the dirt out to somewhere the suction side can pick it up. The dust cup is clear polycarbonate so the fill level is visible without opening it, and it lifts off for emptying and wiping.

The pack, and the run time that is not stated

The battery is given as approximately 6000 mAh, charged over USB-C from a standard 5 V supply, with a full charge taking about 2.5 hours. The supplier does not publish a run time in minutes for either mode, only that it varies with the mode selected, ambient temperature and how hard the unit is working, and that the low-power setting extends it. That figure is missing rather than withheld, so plan around the charge time rather than a stated duration.

Key features

• Suction and blow in one: a side button reverses the airflow for gaps a nozzle cannot seal against.
• Seven nozzles: flat, brush head, crevice tool, narrow tip, wide mouth, floor brush and extension tube.
• Clear dust cup: polycarbonate chamber, removable, so you can see when it needs emptying.
• USB-C charging: the same lead as most other gear in the car.
• Stand and pouch: a magnetic stand and a drawstring bag are included.

Specifications

• Battery capacity: approximately 6000 mAh
• Charging: USB-C, standard 5 V input
• Charge time: approximately 2.5 hours to full
• Run time: not published; the supplier states only that it varies with mode, temperature and use
• Suction figure: not published in pascals, kilopascals or any other unit
• Dimensions: approximately 20 cm long, 6.5 cm wide, 21 cm high
• Weight: under 0.7 kg
• Dust cup material: polycarbonate
• Colour: grey, per the title. The description also mentions a purple-accented airflow head
• Filter type and motor power: not published

What's in the box

• 1 x cordless handheld vacuum and air duster
• 7 x nozzles: flat, brush head, crevice tool, narrow tip, wide mouth, floor brush, extension tube
• 1 x magnetic stand
• 1 x drawstring storage pouch

Battery and charging notes

• The supplier states the unit should not be run while it is charging, and that it needs about ten minutes to cool after ten minutes or more of continuous high-mode use.
• Charge it where you can see it rather than overnight or unattended, and do not leave a lithium pack sitting in a closed vehicle in summer. The supplier itself notes that ambient temperature affects how the battery performs.
• Dry debris only. Liquids, sand and large solids will clog it or strain the motor.
• Wipe the internal mesh screen with a dry cloth after each use, or airflow drops off.
• The magnetic stand needs a clean, dry base to hold properly.

A tidy interior tool rather than a replacement for the shop vac, and honest enough about it that no suction number is claimed.

Returns, Refunds and Replacements

Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

• For customers in Victoria, approximately 7-10 working days;
• For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
• For customers in WA, NT, and TAS, approximately 9-12 working days.