Automotive Floor Mats Fits for Chevrolet Silverado/GMC Sierra 1500 3 pcs

Drag the driver's mat out of a work ute after a wet fortnight and the evidence sits there in one layer: dried clay, crushed gravel, a dark patch where water pooled and stayed. What the mat kept off the carpet is the entire measure of whether it was worth fitting.

Made for the muck that comes with the job

TPE is why this survives a work roster. It takes constant abrasion from boots without thinning at the heel, stays flexible rather than going stiff, and holds its form after months of the same load in the same place. Cleaning is blunt work: pull a piece out, sluice it, let it drain, put it back. Nothing soaks in, so dried clay lifts off instead of setting into pile you can never fully vacuum.

A wall around the mess, teeth underneath

Coverage is the point. Mud, sand, water stains and dropped food land on the liner and travel no further. The raised edge running the perimeter of each piece keeps rain and slush from spilling sideways onto carpet, which is exactly where a flat mat gives up. Underneath, anti-slip pins bite in while the truck's own fasteners hold the driver's piece, so nothing slides towards the pedals when someone climbs in with wet boots.

Key features

• Boot-grade surface: Wear-resistant TPE handles daily scuffing without wearing thin where the heel sits.
• Perimeter wall: The lifted outer edge holds rain, slush and clay on the liner instead of over the sill.
• Double anchoring: Truck fasteners work with pins on the reverse face so the mat has nowhere to travel.
• Scanned contours: 3D laser scanning produces a shape that follows the cab floor rather than approximating it.
• Sluice clean: Dried mud releases under water and the piece goes straight back in without curling.
• Fitted in minutes: Drops into the original mounting position with nothing drilled and no tools out.

Specifications

• Material: TPE
• Supplier fitment, quoted exactly: Chevrolet Silverado / GMC Sierra 1500, 2500 / 3500 HD 2019-2024 / 2020-2024
• Rows covered: Front and second row
• Shaping: 3D laser scan of the cab floor
• Outer edge: Raised on all sides
• Hold-down: Original fasteners plus reverse-face anti-slip pins
• Tools needed: None; no drilling
• SKU: V952-KCDBDXFLSILVY37NOV0

Two things to settle before you buy

Years first. The title carries none at all, and the supplier's sheet reads, word for word: Chevrolet Silverado / GMC Sierra 1500, 2500 / 3500 HD 2019-2024 / 2020-2024. Two ranges, two model lines, no indication anywhere of which range belongs to which truck. We will not guess that mapping. Quantity second: the title advertises 3 pcs, while the sheet describes front and second-row liners and attaches no number to them.

Send us your model and build year and we will verify both points with the supplier. These are aftermarket liners, not a Chevrolet or GMC part.