6AN Hose Separator Clamp, AN6 Fuel Line Mounting Clamp Aluminum Black 4PCS

Fuel and oil lines that aren't held down go looking for something to rub on — a chassis rail, a bracket edge, each other. Braided hose will chafe through whatever it's touching long before it wears out itself. These machined separator clamps fix a run of line in one place and hold parallel lines clear of each other.

Holding a line where you put it

Each clamp closes around the hose and bolts to a bracket, rail or firewall, so the run is anchored rather than cable-tied and hoping. Where two or three lines share a route, spacing them apart stops braid sawing at braid on corrugated roads and keeps them off anything hot. The supplier lists the clamps for fuel hoses, oil lines, brake lines, gas lines and water pipes. They are a mount, not a joiner: they carry no pressure and make no seal.

Machined from 6061-T6

The clamp body is 6061-T6 aluminium alloy, the grade normally chosen for machined brackets because it holds a thread in a thin wall and resists corrosion without plating. The bore measures 0.51 in (12.9 mm), which the supplier gives as the size suiting 6AN line — and it is the hose outside diameter that matters here, not the fitting size stamped on the ends. Five bore sizes exist across the range, so measure your hose OD rather than assuming.

Key features

• Four clamps per set: enough to anchor a full run rather than a single point.
• 6061-T6 aluminium body: machined alloy that takes a mounting bolt without a bulky boss.
• Separates as well as secures: holds parallel lines apart so braid doesn't chafe on braid.
• Mount only: clamps around the hose; it does not seal, join or carry line pressure.

Specifications

• Quantity: 4 per set
• Bore (hose outside diameter): 0.51 in / 12.9 mm
• Line size: suits 6AN (AN6)
• Material: 6061-T6 aluminium alloy
• Colour: black
• Mounting bolt size, clamp thickness and whether fasteners are included: not published

Check before you buy

• This listing carries two style options at different prices. The specifications above are the supplier's for the 6AN clamp set only; the second option's size and contents are not published, so ask before ordering if that is the one you need.
• Measure the outside diameter of your hose. The range runs to five sizes and 6AN is only one of them.
• Where a clamp secures a brake line, fitting and inspection should be done by a qualified person before the vehicle is driven.

Measure the hose and count your mounting points before ordering. A clamp one size out is worse than no clamp at all.

Returns, Refunds, and Replacements

Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.