4 pcs Tie Down Rings, D-Ring Trailer Tarpaulin Tie Downs With Screws For Boats, Trucks, Vans And Homes

A tarp over a load is only as good as what you tie it to, and most trailer floors, ute canopies and boat lockers come with nowhere sensible to hook a rope. These four D-rings bolt on wherever you need an anchor, and swivel to face whichever way the strap pulls.

A ring that follows the pull

Each ring rotates through 180 degrees in its base. That sounds like a small thing until you have a strap dragging a fixed eye sideways: a ring that cannot line up with the load puts a bending force on the base and the fastener instead of a clean pull. Letting it swing means the load path stays straight through the base rather than across it. The D shape also gives a flat bar for a hook or cam buckle to sit against rather than a curve it can slide around.

Galvanised, because it lives outside

The rings and brackets are galvanised iron. Zinc coating is the difference between hardware that survives a season on a boat trailer and hardware that leaves rust streaks down your paint by the second wet. Mounting is straightforward — the bracket takes two bolts into a metal panel or a timber floor, and the pack supplies eight M6 × 25 mm bolts for the four rings. Fit them to something structural: a bracket is only as strong as the panel behind it, and a ring bolted through thin sheet or plywood will tear out long before the ring itself gives up.

Key features

• Set of four: enough to anchor a tarp or a load at all four corners of a small tray or trailer.
• 180 degree swivel: the ring lies flat when unused and lifts to meet the strap when it loads.
• Two-bolt bracket: a quick fit to steel, timber or plastic panels using the bolts supplied.
• Galvanised finish: rust, corrosion and oxidation resistance for gear that lives in the weather.
• Takes rope, webbing, cable or chain: the open D accepts whatever restraint you already own.

Specifications

• Quantity: 4 D-rings, 4 mounting brackets, 8 bolts
• Bolts: M6 × 25 mm
• Material: galvanised iron
• Movement: ring rotates 180 degrees in the base
• Stated load: up to 300 kg. This is the supplier's figure with no stated basis — it is not identified as a working load limit or a breaking strength, no standard or test method is named, and the listing does not say whether it applies per ring or to the set.
• Mounting: two bolts per bracket, into metal or timber
• Measurement tolerance: the supplier asks buyers to allow roughly 13-25 mm

What's in the box

• 4 × heavy duty D-rings
• 4 × mounting brackets
• 8 × M6 × 25 mm bolts

Load limits and what these are not

• Treat the 300 kg figure as indicative only and stay well under it, because no basis and no standard is given for it.
• These are cargo tie-down anchors, not vehicle recovery points. Never attach a snatch strap, kinetic rope or winch line to one — recovery loads must be taken from rated recovery points only.
• Not for lifting, or for any load suspended above a person.
• The panel and the fasteners carry the load. Bolt into structure, use backing plates or large washers on thin material, and re-check tightness after the first loaded trip.
• The listing calls the item both a weld-on ring and a two-bolt bracket fitting. Bolts are supplied, so treat it as a bolt-on part.
• Inspect for bent rings, elongated bolt holes or cracked brackets before each trip, and replace anything deformed.

Sturdy little anchor points for a trailer, tray, canopy or garage wall — the sort of thing you fit once and use for years.

Returns, Refunds and Replacements

Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

• For customers in Victoria, approximately 7-10 working days;
• For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
• For customers in WA, NT, and TAS, approximately 9-12 working days.