4 Pcs Sway Bracket Jacket Bulk Compatible with E2 Hitch Sway Control Brackets 6k 8k 10k 12k 14k Weight Distribution Hitch Parts Bar for RV Noise Reduction Eliminate Creaking Wear 2 x 0.5 Inch

The creaking from a weight-distribution hitch is metal on metal: the spring bar crossbar working against the sway control bracket every time the van moves behind you. These four moulded plastic sleeves slide over that contact point so the two surfaces are no longer rubbing directly against one another.

A wear sleeve, and nothing more than that

It is worth being blunt about what these are, because they sit on towing hardware. Each piece is a plastic jacket that isolates one metal-on-metal contact point on a hitch you already own. It carries no load, it is not a structural or rated component, and it plays no part in how the hitch controls sway. The supplier's copy talks about stability and pressure resistance. None of that is carried here, because a plastic sleeve does not make a towing system more stable. What it does is quieten a noise and slow the wear at one rubbing point.

The brackets the supplier names

Compatibility is stated as E2 hitch sway control brackets, in the 6k, 8k, 10k, 12k and 14k designations. Those figures are bracket model names used by that hitch. They are not a rating of these sleeves and not a towing capacity of any kind. No other brand and no other model is named by the supplier, so none is claimed here. Each jacket is 2 inches wide and 1/2 inch deep, and a size diagram is included so those dimensions can be checked against the bracket in front of you. They slide on by hand, without tools.

Key features

• Four jackets per set: supplied as a set of four, per the supplier.
• Named fitment only: E2 hitch sway control brackets as listed, and nothing beyond that.
• Slides on by hand: no tools, no drilling, no modification to the bracket.
• 2 inch by 1/2 inch section: published dimensions, with a size diagram to check against.
• Moulded plastic: a sacrificial wear face between two steel parts.

Specifications

• Quantity: 4 jackets
• Material: plastic; the supplier describes it as high-strength plastic and names no grade
• Size: 2 inches wide, 1/2 inch deep
• Colour: black
• Stated compatibility: E2 hitch sway control brackets, 6k / 8k / 10k / 12k / 14k
• Load rating: none. This is not a rated component and no load figure is published or implied
• Included: size diagram

Towing hardware must be matched and rated by the hitch maker

• Sway control is what keeps a caravan tracking behind the tow vehicle at highway speed. Nothing in this pack contributes to that. These sleeves do not improve sway control, towing stability or towing safety, and they must never be used in place of a rated hitch part, a worn bracket, or a proper service.
• Check the sleeves against your own brackets using the supplied size diagram, and confirm with the hitch manufacturer that fitting a sleeve at that contact point is acceptable on your equipment. Some sway control designs depend on friction at that surface. Matching and rating towing hardware is the hitch manufacturer's job; fitting it correctly is the owner's.
• Inspect the hitch, the spring bars and the brackets before every trip. Any jacket that has worn through, split or moved out of position should be removed and replaced.
• This is not recovery equipment. It must never be used to snatch, tow, winch or restrain a load.

Four sleeves, straight onto the brackets you already run, to quieten one noisy contact point.

Returns, Refunds, and Replacements

Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

For customers in Victoria, approximately 7-10 working days;
For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
For customers in WA, NT, and TAS, approximately 9-12 working days.