4 PCS Car Top Front Skid Plate Bolts, 304 Stainless Steel 12mm Hex Head Flanged Hexagon Screws, Bolts Compatible with 4Runner Land Cruiser Sequoia Tacoma, Car Accessories (4 PCS)

Bash plate bolts live in the worst place on a vehicle: exposed to road salt, mud and water, and reached from underneath with a spanner every time the plate comes off for an oil change. They seize, the heads round off, and eventually one gets drilled out. Replacing them with stainless is about that corrosion problem and nothing else.

Stainless is about corrosion, not strength

The material is 304 stainless steel. That is a corrosion-resistant grade — it is why these come out again after a few wet seasons instead of welding themselves into the chassis — but it is important to be clear about what it is not. Grade 304 is generally lower in strength than the plated steel bolt originally fitted, and 304 is a material designation rather than a strength class. No property class, tensile figure or proof load is published anywhere in this supplier's data. The supplier's own claim that the screw withstands large impact and torque forces carries no number and is not repeated here as fact. On a plate that takes impact loads and falls off if a fastener lets go, that gap matters, so it is set out here in the open.

One part number to match against

The supplier gives 90080-11373 as the equivalent part number, and lists 4Runner, FJ Cruiser, Land Cruiser, Sequoia and Tacoma among the vehicles. That number is published here purely as a cross-reference, so you can check it against whatever is already screwed into your vehicle. These are aftermarket bolts, not genuine or original equipment parts. The vehicle list is reproduced exactly as the supplier gives it. No model years, no engine variants and no market qualifications appear anywhere in the data, so nothing here has been extended past what is published. The bolt is described as replacing the M8 screws on the top front skid plate, bonnet, splash guard and under-bonnet fittings, with a flanged hex head and a 12 mm hex per the title.

Key features

• Four in the pack: enough to redo one set of skid plate fixings.
• 304 stainless: named by the supplier for rust resistance and for standing up to oily substances.
• Flanged hex head: the flange spreads clamp load over a wider area of the plate.
• 12 mm hex: the drive size published in the title.
• Cross-reference published: 90080-11373, for matching against what is already fitted.

Specifications

• Quantity: 4
• Material: 304 stainless steel
• Thread: M8, per the supplier's description
• Hex size: 12 mm, per the product title
• Head: flanged hexagon
• Cross-reference number: 90080-11373
• Vehicles named by the supplier: 4Runner, FJ Cruiser, Land Cruiser, Sequoia, Tacoma
• Bolt length: not published
• Thread pitch: not published
• Property class, tensile or proof load: not published
• Torque figure: not published

Fitment and fastener checks

• Grade 304 stainless is chosen for corrosion resistance. It is generally not as strong as a plated steel fastener of the same size, and no strength rating is published for these. Where the original bolt carried a marked property class, weigh that up before substituting.
• No bolt length and no thread pitch are published. Wind one of your existing bolts out, measure it, and check it against the images on this page first.
• Part number 90080-11373 is published as a cross-reference for matching only. These are aftermarket fasteners and no origin, approval or endorsement by any vehicle manufacturer is claimed.
• The supplier's own list adds the phrase "and many other models". That wording is not carried here; only the models actually named are listed above, and years and variants are not published at all.
• No torque figure is given for this product. Tighten to the vehicle manufacturer's specification with a torque wrench, and re-check after the first drive.
• A skid plate takes impact loads and a failed fastener drops it. If any of this is unfamiliar ground, have the plate fitted and torqued by a qualified mechanic and the vehicle checked before road use.

Compare a bolt from your own vehicle against the photographs and the part number before ordering — that check is the whole job here.

Returns, Refunds, and Replacements

Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

For customers in Victoria, approximately 7-10 working days;
For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
For customers in WA, NT, and TAS, approximately 9-12 working days.