39 pcs Terminal Removal Tool Kit Terminal Removal Tool Connector Pin Extractor Car Electrical Wiring Crimp Connector

Depinning a whole connector on the bench — a module plug being reterminated, say — goes quickly or not at all, and the difference is whether the right diameter is sitting in front of you when you need it. Thirty-nine tools cover a wide spread of terminal sizes, from 0.8 mm single picks up to twin-fork tools measuring 10.9 mm across the outside.

Sizing the tool to the pin

The set breaks into four families. Single round picks run 0.8, 1, 1.2, 1.3, 1.4, 1.5 and 1.6 mm for the smallest cavities. Twin-fork tools, which straddle a terminal and release both tangs together, cover sixteen inside-and-outside combinations from 1.0 mm inside with 3.0 mm outside up to 8.0 mm inside with 10.9 mm outside. Hollow tube tools take inner diameters of 1.5, 2, 3.0, 4 and 5 mm for terminals that release from the front face. A U-shaped round needle and a single card pin with an acute angle handle the odd shapes.

Stainless working ends, hard plastic covers

Material decides how long a tool this slender lasts. Stainless steel is specified for the working ends, with hard plastic for the main tool covers — which is what stops a 0.8 mm pick bending into a hook the first time it catches a tang. Every handle carries a protective cover, so the strip does not bite into your palm partway through a long loom job.

Key features

• Thirty-nine pieces: a size for most cavity diameters you meet in vehicle and electronics wiring.
• Sixteen twin-fork sizes: both tangs released at once on double-lock terminals, from 1.0 x 3.0 mm to 8.0 x 10.9 mm.
• Stainless steel tips: flexible and resilient by the supplier's description, rather than brittle.
• Hollow tube picks: 1.5 to 5 mm inner diameter for front-release terminals.
• Covered handles: hard plastic where your hand goes, so pressure can be applied without discomfort.

Specifications

• Pieces: 39
• Material: stainless steel and plastic, with hard plastic tool covers
• Single pin diameters: 0.8 / 1 / 1.2 / 1.3 / 1.4 / 1.5 / 1.6 mm
• Twin-fork sizes: sixteen inside/outside combinations spanning 1.0 x 3.0 mm to 8.0 x 10.9 mm, including one 1.5 mm x 2 inside with 6.5 mm outside thread
• Hollow pole pin inner diameters: 1.5 / 2 / 3.0 / 4 / 5 mm
• Other shapes: U-shaped round needle; single card pin with acute angle
• Package weight: 60 g, as given by the supplier
• Case or pouch: the supplier's sheet is silent on this

Measure your connector first

• The size list above is the real fitment information. Measure the cavity on the connector you intend to work on and compare it against those diameters — no list of supported connector brands or families is given.
• No kit covers every connector on the market. Where a plug uses a proprietary release, confirm a matching shape appears among the sizes listed.
• Household appliances are mentioned in the supplier's wording. Treat this as a low-voltage automotive and electronics tool; mains-connected equipment is not its place.
• Where altering permanent vehicle wiring is involved, have a qualified auto electrician carry it out.

Buy it once, and the guessing with a paperclip stops.

Returns, Refunds and Replacements

Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

• For customers in Victoria, approximately 7-10 working days;
• For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
• For customers in WA, NT, and TAS, approximately 9-12 working days.