352 Pcs Waterproof a Water Connector Kit Car, Scooter Electrical Terminal of Car Waterproof a 0.5 and 0.75 Pins for Motorcycle

A chafed wire behind a driving light or a corroded plug on a trailer loom is a twenty-minute repair if the right connector is on the shelf, and a weekend of waiting if it isn't. This assortment covers sealed housings in one, two, three and four-pin configurations, with the terminals and cable seals needed to make both halves up.

What the cable seals are actually for

Each housing takes a silicone rubber seal at the wire entry. That is protecting the crimp, which is where automotive wiring usually gives up: water wicks in, the joint corrodes from the inside, and resistance climbs long before the circuit dies outright. The supplier publishes no IP rating, so treat these as weather-sealed rather than submersible. Face the connector downwards and support the loom so the seal is not carrying the strain.

Four housing sizes and how they get used

One-pin through four-pin spans single-wire earths and sensor feeds at one end and multi-wire lighting and sensor plugs at the other. Male and female terminals are supplied so both sides of a connection come out of the same kit. The housings use a loop-style retention design, so a terminal seats with a click and can be backed out again when a wiring diagram doesn't match what is in front of you.

Key features

• One, two, three and four-pin housings: matched male and female halves in each size.
• Silicone rubber cable seals: fitted at the wire entry to keep moisture off the crimp.
• Beyond the car: the supplier lists motorcycles, scooters, trucks, ATVs, caravans, jet skis and boats alongside cars.

Specifications

• Piece count: 352 pieces per the product title; the supplier's own specification sheet says 300 (see the note below)
• Connector types: 1-pin, 2-pin, 3-pin, 4-pin
• Terminals: male and female
• Seal: silicone rubber cable seal
• Wire size: not published; the title refers to 0.5 and 0.75, presumably square millimetres
• IP rating: not published
• Quantity of each connector size: not published

Before you start cutting into a loom

• Count the contents on arrival: the title says 352 pieces and the supplier's specification says 300. Confirm you have what the job needs before anything is cut.
• A crimping tool is not included: these terminals want a proper ratchet crimper. Pliers give a joint that looks right and fails a few months later.
• Isolate the battery first, and leave airbag, ABS and other safety-system wiring to a qualified auto electrician.

Keep it in the workshop drawer and most twelve-volt repairs stop being a parts run.

Returns, Refunds and Replacements

Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

• For customers in Victoria, approximately 7-10 working days;
• For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
• For customers in WA, NT, and TAS, approximately 9-12 working days.