1 Pair Battery Terminal Connector, Heavy Duty Cable End Connector Compatible With Car, Van, Truck Marine Boat RV etc, Top Post Battery Terminals End Clamp Set by

A battery terminal is the connection you check with the engine off — key out, bonnet up, a light tug on each clamp — and here are two worth checking: positive and negative top-post clamps in brass, 195 to 205 grams the set, built to take M10 cable lugs. The supplier tells you what the set weighs; it never tells you what the set is rated to carry, and that gap gets its own section below.

Brass where the current flows, steel where it clamps

The main body of each clamp is brass, which carries the supplier's whole electrical argument: high conductivity and low resistance for maximum current flow, in its words. Brass also earns its keep mechanically — the supplier calls it more resilient than iron and lead and says it won't crack — while the actual squeezing is left to steel screws and nuts, with strength and reduced corrosion claimed for the package as a whole.

Why one cone is bigger than the other

Standard top-post batteries taper the positive post fatter than the negative so the two can never be swapped by accident, and these clamps follow suit: a 19 mm cone for the positive side, 17 mm for the negative. The supplier pitches them past the engine bay too — boats, trucks, RVs and general electrical equipment with standard top posts — for battery extension, parallel connection and ground connection alike.

Key features

• Brass through the body: the metal doing the conducting, per the supplier's low-resistance claim.
• Steel screws and nuts: the fasteners that pull each clamp tight on its post.
• M10 lug fitting: the cable side of the joint, sized for M10 wire-end lugs.
• A true polarity pair: 19 mm positive and 17 mm negative cones, one clamp each.
• Weighed, not rated: 195 to 205 grams the set — a scale reading where an electrical rating might have stood.
• Wider than cars: boats, trucks, RVs and top-post electrical equipment all make the supplier's list.

Specifications

• Terminal type: standard top post
• Positive cone: 19 mm
• Negative cone: 17 mm
• Cable fitting: M10 lugs
• Clamp body: brass
• Fastener metal: steel
• Set weight: 195 to 205 g
• Sold as: 1 pair, positive and negative

What no number here tells you

• An electrical connector described without a single electrical number: no amps, no volts, and "maximum current flow" is a phrase, not a measurement. Size your cabling, fusing and expectations from your vehicle's demands, not from this page.
• Higher up, this listing promises corrosion-free; the supplier's own bullet offers both a hedge (reduced corrosion) and a flat no-rust promise, and the lesser wording — reduced corrosion — is the promise you get from us.
• The supplier's inch dimensions arrived with corrupted characters, listed in the reverse order of its millimetre ones; the millimetre figures above are the pair we trust.
• De-branding has chewed this listing twice: the title stops dead at "Clamp Set by", and the source carried a maker's boast opening mid-sentence where its name once sat. Both vestiges stay out of the copy above.

A screw-fastened pair in brass, described by its mass and its cone sizes alone: 195 to 205 grams, 19 and 17 millimetre cones, and not one amp figure anywhere.

Returns, Refunds, and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.