Ice Mesh Seat Covers - Universal Size

Two listings in this store carry the identical name, and only one of them covers the back seat. This is the rear set, size code 06/08Z, supplied with three headrest covers and zips built into the rear panels. Nothing in this pack goes on the driver or front passenger seat, so order the front set separately if you need both rows done.

Reading the size code 06/08Z

Supplier size codes are the part of a listing most buyers skip past, and they are where the wrong orders in this range begin. 06/08Z describes a rear bench: one full-width seat with three separate headrest covers above it, the standard layout in a five-seat sedan, wagon, hatch or dual cab ute. Count the headrests across your own back seat first. Three posts and this set matches the shape it was cut for. Two posts, or a fixed centre pad instead of a third, and no alternative sizing is published.

Zips that follow your split-fold

Rear benches rarely fold as one piece. Most split 60/40, and a cover cut as a single sheet pins the bench down the first time you drop a section for a surfboard or a flat-pack. The answer here is zippers set into the rear panels: unzip along the split line, fold the part you need, and each section keeps its covering. The supplier calls it a flexible split-fold system suited to all split-folds, without naming specific ratios, so hold that against your own bench.

Key features

• Rear row only: the back bench and its headrests, with the front seats left for a separate set.
• Three headrest covers: matched to a five-seat rear layout rather than a two-post bench.
• Zipped rear panels: the split-fold stays usable, so the seat still drops for long loads.
• 12 mm mesh: the supplier's stated thickness, sitting the fabric off the trim rather than flat against it.
• Blue or grey: both colours are stocked and selectable on this listing.

Specifications

• Size code: 06/08Z
• Seat position: rear
• Fitment: universal — the supplier states made to fit all vehicles
• Material: 12 mm thick mesh
• Split-fold: zippered rear panels
• Airbags: listed by the supplier as airbag compatible
• Fitting: no professional installer needed, per the supplier
• Colours and SKUs: Blue V121-UNIICE06HBLU, Grey V121-UNIICE06HGRY
• Dimensions, panel count: neither figure appears in the supplier data

What's in the box

• Rear bench covers
• Three headrest covers

Check before you order

• Airbag compatibility here is the supplier's claim, made without any mention of a tear seam. If your back seat carries a side airbag, check its labelling first and get a qualified person to fit the covers and inspect the car before it is driven.
• Universal is not custom. The panels are cut to a common rear-bench shape, not to your vehicle's trim, so expect to work the fit rather than drop it on.
• No cover dimensions are published. Measure your bench width and backrest height against the photos if your back seat is unusually narrow or tall.

If the back seat is where the kids, the dogs and the wet gear go, this is the row worth covering first. Choose blue or grey above.