Steel Ramps, 1000 lbs, 2Pcs Heavy-duty Ramps with Wider Ramp Surface, Universal Stable Loading Ramp with Handles, Fit for ATV, UTV, Motorcycle, Electric Bicycle, etc.

Getting a quad or a push mower up into a ute tray on a couple of borrowed planks is how people end up with a bent rim or a broken ankle. This two-piece steel set gives you a proper arched climb, a gripped surface, and claw plates that hook over the tray lip.

What the 1000 lbs rating actually covers

The supplier rates this set at 1000 lbs and states that figure as a combined capacity for the two ramps together, not 1000 lbs each. Work to the combined number, and count the weight of everything riding on the machine as well, because fuel and a strapped-on load add up faster than most people expect. The arch is there for clearance: it lifts the middle of the ramp so a long wheelbase or a low sump does not foul halfway up. The supplier also warns against exceeding the rated load if you want the set to last.

Zinc-coated steel that lives outside

Construction is all steel, precision welded with tightly sealed joints, then finished in white zinc. That coating earns its keep on ramps stored in an open trailer or leaning against a shed wall. Edges are deburred, so there is no raw steel waiting to open up a palm when you swing one out. The ramp face is thickened and widened compared with a plain channel, which spreads the wheel load across more of the section instead of concentrating it on a narrow strip, and that is what keeps a ramp from bowing over repeated use.

Out and away in seconds

Each ramp folds and unfolds in about a second on reinforced triangular joints, so there is no bolting anything together at the tailgate in the rain. Rubber three-finger claw plates sit over the tray edge to stop the top end walking sideways, and adjustable straps pull the ramp back against the vehicle. A rubber handle makes each one easier to carry.

Key features

• Two-piece set: both ramps supplied, with the capacity rated across the pair.
• Rubber claw plates: a three-finger grip clamps over the tray lip so the top end stays seated.
• Adjustable straps: tension each ramp back against the vehicle before anything drives on.
• White zinc coating: corrosion resistance for ramps that are stored in the weather.
• One-second fold: reinforced triangular joints, with no assembly at the tailgate.
• Textured surface: gives tyres and boots something to bite on going up.

Specifications

• Load capacity: 1000 lbs, stated by the supplier as a combined figure for the two-piece set
• Quantity: 2 ramps
• Material: all-steel, precision welded
• Finish: white zinc coating
• Profile: arched
• Fittings: rubber three-finger claw plates, adjustable securing straps, rubber carry handle
• Supplier-listed uses: ATVs, UTVs, motorcycles, electric bicycles, push mowers, electric scooters

Before you load anything

• The 1000 lbs figure is the supplier’s combined rating for both ramps. Add the machine, its fuel and anything strapped to it before deciding the set suits the job.
• The supplier states the rated load should not be exceeded.
• Check the claw plates seat squarely on your tray or trailer lip and the straps are tensioned before anything is driven up.
• No ramp length, width or arch height is published for this set, so measure your load height and the machine’s ground clearance first.

If the numbers stack up for what you are loading, this is a straightforward steel set that folds away when the job is done.