BULLET Pair of 1.6m Aluminium Loading Ramps, 4050kg capacity

Getting a car or a mini excavator up onto a truck bed is the part of the job that usually needs a second pair of hands and a lot of guesswork about the angle. This BULLET Extreme Series set is two 1.6 m ramps at 14 kg each, with a stated working height range that runs from a low box trailer up to a tray truck.

What the 4050 kg figure actually covers

BULLET quotes the rating two ways: 2025 kg per ramp, and 4050 kg for the pair. The pair figure only holds when the load is shared reasonably evenly across both ramps, so a vehicle sitting heavily on one wheel track is leaning on the per-ramp number instead. Work from the kerb weight of whatever you are loading, plus fuel, tools and anything still strapped in, and keep a margin. Nothing needs assembling out of the carton, so the only pre-load check is that both lock-in tabs are properly seated over the edge.

Marine grade alloy, serrated the whole way up

The alloy is marine grade, which is the reason a set that lives strapped to a trailer through coastal air and rain does not bloom with rust the way plain steel does. Each slat is serrated rather than smooth, giving tyres and work boots an edge to bite on when the surface is wet or greasy. Welds are machine-run rather than hand-tacked, so the bead stays consistent along every slat-to-rail joint instead of varying with the operator.

Key features

• 2025 kg per ramp, 4050 kg the pair: BULLET publishes each figure with its basis.
• 400 mm to 850 mm loading height: low box trailer through to a high tray.
• Lock-in tabs: stop a climbing wheel shifting the ramp sideways off the edge.
• 14 kg per ramp: repositionable on your own between loads.
• No assembly: ready to use, no fasteners to torque first.

Specifications

• Brand: Bullet Pro
• Maximum loading: 2025 kg (each), 4050 kg (pair)
• Loading height range: 400 mm - 850 mm
• Maximum loading height: 850 mm
• Material: marine grade aluminium alloy
• Dimensions (W x L x H): 31 x 161 x 11 cm each ramp
• Weight: 14 kg each, 28 kg the pair
• Assembly: none required
• Warranty: full 12 months

What's in the box

• 2 x BULLET loading ramps
• User manual, accessible online

Before the first load

• Weigh the vehicle and its contents against the rating that matches your setup - per ramp or per pair.
• Seat both lock-in tabs over the tray edge before anything drives on.
• Keep the deck height inside the stated 400 mm to 850 mm range.

If loading on your own is the norm rather than the exception, a 14 kg carry weight against a stated 4050 kg pair rating is the trade-off worth looking at.

We accept Change of Mind returns for 14 days after you have received the item in cases where you have changed your mind or made an incorrect purchase and wish to return the product. This also applies to orders canceled when the item has already been dispatched from our warehouse. The item must be in a re-saleable condition to qualify for a change of mind refund. Deductions may apply including Initial and Return Shipping, as well as restocking fee of 10% of the product price