Aluminum Ramps, 2000 lbs, 2Pcs Heavy-duty Ramps with Wider Ramp Surface, Universal Stable Loading Ramp with Handles, Fit for ATV, UTV, Motorcycle, Electric Bicycle, etc.

Getting a quad bike into a ute tray on your own is a job that usually ends badly. This two-piece arched set bridges the gap from ground to tray, and the arch is the point of it: the rise in the middle lifts the run so long, low machines clear the tailgate lip instead of grounding out on it.

Welded joints, sealed seams

Every joint is welded and the seams are sealed tight, so there is nothing bolted through the structure that can work loose after a season of loading. The build is all-aluminium: a corrosion-resistant surface and burr-free edges, which you notice the first time you grab one bare-handed. The tread is thickened and run wider than a standard plank, spreading a tyre's contact patch across more metal rather than concentrating it on a single rail. That distribution is what stops the section cracking or collapsing under repeated use, more so than any headline number.

The rating is for the pair, not each ramp

Load ratings on ramps are easy to misread, so here is the supplier's figure exactly as given: a combined load capacity of up to 2000 lbs. That is the number for the two-piece set working together, not a figure for each ramp on its own, and it is worth checking against the kerb weight of whatever you are loading before the first run. The supplier also asks that the recommended capacity not be exceeded. Work out the loaded weight of your machine with fuel and any gear included, then leave yourself margin rather than sizing right to the limit.

Key features

• Arched two-piece set: the rise in the middle gives long, low machines clearance over the tray lip.
• Rubber three-finger claw plates: grip the pickup or ute tray edge rather than resting loose against paintwork.
• Adjustable securing straps: tie the ramps to the vehicle so they cannot slide sideways under a turning wheel.
• One-second fold: reinforced triangular joints let the ramp open and close without tools.
• Rubber carry handle: each ramp lifts one-handed and stores flat in a garage corner or a boot.
• Sloped feet: the base is angled for full contact with the ground instead of sitting on an edge.

Specifications

• Material: aluminium throughout, welded with sealed joints
• Load capacity: up to 2000 lbs, stated by the supplier as the combined capacity of the two-ramp set
• Profile: arched
• Tread: thickened, widened surface
• Attachment: rubber three-finger claw plates plus adjustable securing straps
• Folding: yes, reinforced triangular joints
• Finish: corrosion-resistant, burr-free edges
• Set: 2 ramps

What's in the box

• 2 x aluminium arched loading ramps
• Adjustable securing straps

Before you fit these

• The 2000 lbs figure is the supplier's combined rating for the pair. Do not read it as a per-ramp number.
• The supplier advises against exceeding the recommended capacity, so weigh the load rather than estimating it.
• No ramp length, width or weight is published for this set. If run length matters at your tray height, confirm it before ordering.
• The claw plates are designed for a pickup or ute tray edge. Check your tailgate lip is a shape they can seat on.

Listed by the supplier for ATVs, UTVs, motorcycles, push lawn mowers and electric scooters. Match the rating to your load first, and this set takes over the lifting you would otherwise do with your back.