LED Side Marker Lights 10PCS, 12V Waterproof Car Truck Warning Tail Lamps

Marking out a caravan or a long trailer means fitting the same small lamp eight or ten times over, and buying them one at a time turns a cheap job into an expensive one. This pack holds ten lamps with the mounting screws included, which is close to what a caravan, a horse float or a tandem trailer needs to be done properly in a single session.

Ten lamps and the screws to hang them

Each lamp measures 6.5 x 3.6 x 1.2 cm and carries two LEDs behind a sealed lens. Twenty screws are included — two per lamp — so the job doesn't stop halfway for a trip to the hardware shop. Wiring is deliberately plain: two leads, white positive and black negative, 18 cm long. That is enough to reach a junction inside a rail, and short enough that you are not stuffing surplus wire into a cavity where it can chafe.

Sealed for the underside of a trailer

The supplier rates these IP68 and describes a fully closed circuit with the lens sealed into the housing. That seal is what decides how long a side marker lasts, because these lamps sit low, take constant road spray and get peppered with stones — and the usual failure is water creeping past the lens, not an LED giving up. The supplier quotes more than 50,000 hours of service life. Mounting is flat against any surface, so a guard, a rail or a body panel all suit.

Key features

• Pack of ten: enough to mark out both sides of a caravan or long trailer in one go.
• Twenty screws included: two fixings per lamp, supplied in the box.
• IP68 rated: supplier-stated sealing, with a fully closed circuit and sealed lens.
• Two-wire hook-up: white positive, black negative, on 18 cm leads.
• Two LEDs per lamp: rated by the supplier at more than 50,000 hours.

Specifications

• Quantity: 10 lamps
• Dimensions: 6.5 x 3.6 x 1.2 cm
• LEDs per lamp: 2
• Wire length: approx. 18 cm (180 mm)
• Wiring: white positive, black negative
• Ingress rating: IP68 (supplier stated)
• Voltage: 12 V per the product title; the supplier's body text also states 12 V/24 V
• Rated service life: more than 50,000 hours (supplier stated)
• Fixing hole spacing: stated two ways by the supplier — 0.55 cm in one place and 55 mm in another
• Lens colour: the supplier lists amber, white and red; only one configuration is stocked here

What's in the box

• 10 x LED side marker lamp
• 20 x mounting screw

Before you fit these

• Marker and clearance lamp colour is restricted by where the lamp sits on the vehicle — amber, white and red are not interchangeable front, side and rear. Confirm the requirements that apply to your vehicle and state before fitting for road use.
• Lens colour is not selectable at checkout. Check the listing images for the colour supplied before ordering.
• The supplier's fixing hole spacing is contradictory (0.55 cm in one place, 55 mm in another). Measure the lamp itself before drilling.

Suits caravans, campers, horse floats, box and tandem trailers, trucks and buses. Work out how many you need per side before the first hole goes in.

Returns, Refunds and Replacements

Products received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with local consumer laws. We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. Please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Delivery is approximately 5-10 business days (excluding weekends and public holidays).