LED Headlight 150W Round LED Headlamp H4 H13 6500K Waterproof Low Beam, 150W, 7 in

Sealed-beam 7-inch round headlamps on an older Wrangler, Hummer or Defender were never bright, and decades of yellowed glass has not helped. This is a one-piece LED replacement for that bucket — a single unit, so a pair means ordering two — with high beam, low beam, indicator and daytime running functions built into the one lamp.

What the supplier publishes about output

The lamp is rated at 150 W and the supplier quotes up to 15,000 lumens from EV-CSP chips, with a service life of roughly 80,000 hours. Two colour temperatures appear in the same specification sheet — 6500 K for the main output and 4300 K described as a warm yellow light — and the supplier does not explain how the two relate, so both are published here as given. Input is a wide 9–30 V, covering 12 V and 24 V vehicles alike.

Aluminium body doing two jobs

The housing is aluminium, acting as both the structure and the heatsink. An LED headlamp running at this wattage produces heat that has nowhere to go in a plastic shell, and heat is what shortens LED life. Sealing is rated IP67 and the supplier states an operating range of -40 °C to 85 °C. Wiring is an H4 plug with an H13 adapter cable in the box, and the circuit board housing is removable, which helps where depth behind the headlight bucket is tight.

Key features

• Sold individually: one lamp and one adapter cable per box — order two for a pair.
• Four functions in one lamp: high beam, low beam, indicator and daytime running light.
• H4 plug with H13 adapter: connects to either loom without cutting the factory connector.
• Aluminium housing: moves heat away from the chips at a stated 150 W.
• IP67 sealing: rated against dust and water for corrugated, wet and dusty work.
• 9–30 V input: suits both 12 V and 24 V systems.

Specifications

• Size: 7 in round (approximately 178 mm)
• Power: 150 W as stated; the supplier does not say whether this is draw or nominal
• Voltage: 9–30 V DC
• Output: 15,000 lm as stated by the supplier
• Colour temperature: 6500 K main output; the specification also lists 4300 K warm yellow light
• LED chip: EV-CSP
• Housing: aluminium
• Ingress rating: IP67
• Operating temperature: -40 °C to 85 °C
• Rated life: approximately 80,000 hours
• Height: 9 cm
• Packaged size: 18 x 18 x 10 cm
• Packaged weight: 770 g
• Beam pattern: not published by the supplier
• Listed fitment: Jeep Wrangler JK, TJ, LJ and CJ series; AM General Hummer; Hummer H1 and H2; Land Rover Defender 90 and 110

What's in the box

• 1 x 7-inch round LED headlight
• 1 x adapter cable

Before you fit these

• This is a replacement lamp assembly, not a genuine part. The supplier names no beam-pattern standard, and none is claimed here.
• The stated 6500 K is a cool white and the stated 150 W is well above a sealed beam of the same size. Confirm the lighting requirements that apply to your vehicle and state before fitting for road use.
• Check what the existing headlight loom and connector can carry at this wattage; a relay and heavier-gauge wiring may be needed.
• Measure the depth available behind the headlight bucket before ordering, and aim the lamp after fitting.

Suits the listed Jeep, Hummer and Defender models running a 7-inch round headlamp. Order two if you are doing both sides.

Returns, Refunds and Replacements

Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

• For customers in Victoria, approximately 7-10 working days;
• For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
• For customers in WA, NT, and TAS, approximately 9-12 working days.