2x H1 LED Headlight Bulbs Conversion Kit High Beam Low Beam Fog Light 100W 6000K

Halogen H1 globes go yellow long before they finally blow, and the first thing you notice is how little of an unlit road you can see. This is a two-bulb LED set in the same H1 shape, so it goes into the standard holder without cutting, brackets or adaptors.

Built as a straight H1 swap

The body is aluminium alloy, and the metal doubles as the heat sink, which is how an LED sheds the heat a filament simply radiates into the housing. Each bulb runs about 2.4 x 6.5 cm, close enough to a standard H1 that the supplier describes fitting as plug and play, with no change to the wiring. Working voltage spans 12 V to 24 V, so it suits a truck as readily as a car, and there is no filament to shake apart on corrugations.

Instant light, and what the numbers actually say

An LED reaches full output the moment the switch closes, and the supplier makes a point of the absent warm-up delay. Past that, the figures need care. Output power appears as 100 W in the title, while the same listing claims 51.5 W is equivalent to an 80 W tungsten lamp. The two do not reconcile, and nothing says which is draw.

Key features

• Sold as a pair: two bulbs, enough for one set of lamps.
• H1 fitment: suits H1 holders only, whatever else the listing names.
• Aluminium alloy body: the housing doubles as the heat sink.
• 12 V to 24 V: covers car, 4WD and truck systems.
• Sealed construction: supplier calls the bulbs waterproof, high-temperature and corrosion resistant.

Specifications

• Quantity: 2 bulbs
• Fitment: H1
• Working voltage: 12 V to 24 V
• Output power: 100 W per the title; the description separately states 51.5 W as equivalent to an 80 W tungsten lamp, without saying which is draw
• Colour temperature: 6000 K
• Luminous colour: white
• Brightness: 10,000 to 12,000 mcd, as stated
• Light angle: 360, as stated
• Material: aluminium alloy
• Size: approximately 2.4 x 6.5 cm
• Lifespan: up to 50,000 hours, as claimed by the supplier
• Lumen output and beam pattern: not published

What's in the box

• 2 x LED headlight bulbs

Before you fit these

• This is an LED retrofit into a housing designed around a halogen H1 filament. The supplier publishes no beam pattern, so check where the light actually falls against a wall before relying on it at night.
• Colour temperature is 6000 K. Restrictions on light colour apply to forward-facing lighting and vary by state. Confirm the requirements that apply to your vehicle and state before fitting for road use.
• Output power is listed at 100 W, close to double a standard 55 W H1. Check the connector, wiring and housing can carry the extra load and heat before fitting.
• The listing also names fog, brake, reverse and indicator use. The bulb is an H1 and fits an H1 holder, so check the base your fitting takes before ordering.

A sensible swap where the original H1 has faded, provided the aim gets checked afterwards.

Returns, Refunds and Replacements

Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

• For customers in Victoria, approximately 7-10 working days;
• For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
• For customers in WA, NT, and TAS, approximately 9-12 working days.