Pair 4 inch Spot LED Work Light Bar Philips Quad Row 4WD Reverse Driving

A flood lamp shows you the ground at your feet. What it will not do is reach — and reaching is the whole point when you are picking a line down a rutted track or looking for a gate marker in the dark. These are spot optics, listed at 10.5 degrees, which is about as tight as a 4-inch lamp gets.

A narrow cone puts the light where it is aimed

24 Lumileds LUXEON 3030 emitters, 1 W each, sit in four rows behind the reflectors. The supplier quotes 2,150 lumens per lamp with a peak intensity of 81,560 candela — the second figure is the one that matters with a spot, because it describes concentration rather than total output. Practically, that means a defined pool a long way out rather than a soft wash near the bumper. Aim these deliberately: a tight beam pointed carelessly is a bright patch of nothing useful.

Amber or white, chosen at checkout

Both colours are stocked, and they do different jobs. Amber cuts back the glare that bounces off dust, fog and heavy rain, which is why it turns up on convoy and station vehicles. White reads more naturally and keeps the colour of signage and terrain. The supplier publishes one set of figures for the listing — including a 3000 K colour temperature — and does not break the numbers out per colour, so treat the white variant's exact temperature as unpublished.

Key features

• Pair supplied: two lamps, brackets fitted, for both sides of a bar or tray.
• 10.5° spot beam: the tightest pattern in this size, for distance rather than spread.
• Low draw: 1.1 A per lamp at 12 V, or 0.55 A on a 24 V system.
• IP68 sealed: supplier rated for dust, water and wash-downs.
• Two colours: amber for dust and rain, white for general use.

Specifications

• LEDs: Lumileds LUXEON 3030 2D, 1 W, 24 fitted (P/N L130-5770003000W21)
• Colour temperature: 3000 K (supplier stated, single figure for both colour options)
• Luminous output: 2,150 lm per lamp (supplier stated)
• Peak intensity: 81,560 cd
• Beam: spot, 10.5°
• Voltage: 12 V and 24 V
• Current draw: 1.1 A at 12 V, 0.55 A at 24 V per lamp
• Lens: optical grade hard-coated Lexan
• Housing: A360 cast face plate, extruded aluminium heat sink
• Ingress protection: IP68
• Operating temperature: -40°C to 60°C
• Weight: 0.46 kg per lamp
• Rated life: 50,000 hours
• Wattage: not published; the SKU references 18 W while the specification lists 24 x 1 W emitters

What's in the box

• 2 x 4 inch spot LED work light bars

Before you fit these

• Colour restrictions apply to forward-facing and rear lighting and vary between states. Confirm what applies to your vehicle and your state before fitting the amber option for road use.
• Positioning, covering and wiring requirements also apply to auxiliary driving and work lamps — check these before the install rather than after.
• Wire through a relay, fuse and switch so the pair can be turned off independently of the headlights.

Worth pairing with a flood lamp if you want both reach and spread; on their own they are a distance light.

Shipping :

Please note that deliver to PO BOX address is available.

Please make sure you have provided a correct physical address during checkout on products of excessive size.

To aim in smooth and speed of delivery, ensure your address is correct during the checkout. With correct information provided, your order is dispatched within 1 business day. Any changes to address after payment made will not be considered.

Please allow 2 to 12 business days for product to arrive. We highly recommend to provide an answerable contact number and email address as we do make call to follow up item delivery status.

Your item will be sent via Australia Post or Local Courier depending on its availability.