2PCS H4 LED Bulb, 12V Motorcycle/Car Headlight, 12W COB Bulbs Headlight LED Bulb for High Beam Headlight, High Beam/Low Beam

A faded H4 halogen on a bike is a real safety problem. The edge of the road arrives late, and oncoming traffic picks you up later still. These are COB LED globes on an H4 base, supplied as a pair, carrying high and low beam on the one unit.

Two light faces on one base

Each globe carries COB LED chips on two faces, which is how a single unit covers both filaments an H4 replaces. There is no ballast, driver box or extra loom; the supplier describes it as a direct plug-in with nothing else required, so the job stays a globe swap. The body measures about 80 mm long and 17 mm across, so clearance behind the reflector is worth measuring first.

What the numbers actually say

The supplier publishes 900 lumens, 12 W and 6500 K, but never says whether the lumen and wattage figures are per globe or per pair, so they stay unqualified here. The electrical data does not add up either: a listed output of 12 V at 0.62 A falls well below the quoted 12 W, and the operating range is given as 9-80 V DC on a product titled as 12 V.

Key features

• H4 fitment: replaces an H4 globe only, so check what the headlight currently runs.
• High and low beam in one unit: two COB faces, as an H4 halogen has two filaments.
• No ballast or driver: the supplier states no additional hardware is required.

Specifications

• Fitment: H4
• Chipset: 2 x COB LED
• Power: 12 W (supplier figure; per globe or per pair not stated)
• Luminous flux: 900 lm (supplier figure; basis not stated)
• Colour temperature: 6500 K
• Output: DC 12 V x 0.62 A
• Operating voltage: DC 9-80 V (supplier figure; conflicts with the 12 V in the title)
• Size: approx. 80 mm x 17 mm
• Ingress rating: not published

What's in the box

• 2 x H4 COB LED globes

Before you fit these

• This is an LED retrofit into a housing designed for a halogen filament. The supplier publishes no beam pattern, so how the light falls in your reflector can only be judged once it is in and aimed against a wall.
• At 6500 K the output sits at the cool end. Colour temperature restrictions apply to forward-facing lighting and vary by state. Confirm the requirements that apply to your vehicle and state before fitting for road use.
• The supplier lists an operating range of 9-80 V against a 12 V title. If your bike or scooter runs anything other than a 12 V system, check with the supplier first.
• Aim the headlight after fitting, not before.

Sensible if the existing H4 has faded and a spanner is a cheaper answer than a new headlight.

Returns, Refunds and Replacements

Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

• For customers in Victoria, approximately 7-10 working days;
• For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
• For customers in WA, NT, and TAS, approximately 9-12 working days.