20W LED Fog Light LED Work Light Ip68 Waterproof Work Light LED Car Headlight Off-ROad Motorcycle Atv Utv 4X4 Suv

Auxiliary lights lead a hard life. A pressure washer at the servo, half a metre of muddy water at a creek crossing, then vibration all the way home. This 20 W pod is built around that: a sealed die-cast body, a stainless bracket and a round housing small enough to go where a light bar will not.

A combo beam out of one lens

The optic is what the supplier calls a 7D PMMA lens, moulded acrylic rather than glass, and it splits the output of a single emitter two ways: a tight centre for distance and a wider spread around it for the ground close in. That is why one pod can serve as both a driving aid and a work light, giving reach without leaving a dark patch at your feet. The supplier attributes the chip to CREE, rates output at 2000 lumens and colour temperature at 6000 K.

Sealed to IP68, and cooled to stay bright

IP68 is the supplier's rating and it puts a figure behind it: submerged in one metre of water for at least 30 minutes. The housing is 6063 die-cast aluminium with an oversized fin block behind the lens, and heat is what actually kills an LED. Chips dim as junction temperature climbs, so that fin area does more for brightness three seasons in than any number on the carton. The supplier quotes a service life beyond 50,000 hours and notes the round profile cuts wind resistance. A stainless steel mounting bracket comes with it.

Key features

• 7D PMMA lens: combines spot and flood output from a single emitter.
• 20 W single chip: the supplier names CREE and rates it at 2000 lumens.
• IP68 sealed: the supplier states one metre of water for at least 30 minutes.
• 6063 die-cast aluminium housing: doubles as the heatsink, with an oversized fin block.
• Stainless steel bracket: supplied for bar, bumper or cage mounting.

Specifications

• Power: 20 W (supplier figure; whether this is draw or nominal is not stated)
• Luminous flux: 2000 lm (supplier figure)
• Colour temperature: 6000 K (supplier figure)
• Beam pattern: combination spot and flood
• Lens: PMMA acrylic, described by the supplier as 7D
• Housing: 6063 die-cast aluminium
• Bracket: stainless steel
• Ingress rating: IP68 (supplier states 1 m for at least 30 minutes)
• Rated life: more than 50,000 hours (supplier figure)
• Operating voltage: not published
• Dimensions and weight: not published
• Pack quantity: not stated

Before you fit these

• Operating voltage is not published anywhere in the supplier's data. Confirm it suits your 12 V or 24 V system before wiring it in.
• The title also describes this as a car headlight. It is an auxiliary pod. Positioning, covers and wiring requirements apply to driving lights, spotlights and work lights, and the use of work lighting while a vehicle is moving is restricted. Confirm the requirements that apply to your vehicle and state before fitting for road use.
• Anything wired into the vehicle may need a relay, an inline fuse and correct gauge wiring. The supplier does not state a current draw, so size the circuit on the figures for your own installation.

A sensible single pod for a bar, a cage or the back of a tray, where the alternative is working by torchlight.

The supplier states: "We offer 1 year warranty and 2 months full refund."

Returns, Refunds and Replacements

Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

• For customers in Victoria, approximately 7-10 working days;
• For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
• For customers in WA, NT, and TAS, approximately 9-12 working days.