T-REX 590kg Vehicle Positioning Jack, Mechanical Ratcheting Foot Pedal Wheel Dolly For Auto Car Moving

The first capacity figure this listing gives you is 1180 kg and the second is 2360 kg, and neither of them describes what arrives. One jack ships. One jack is rated at 590 kg, and that number waits in the specification block while the opening sentence sells the totals for two of them and for four. The larger figures are honest arithmetic about quantities you would have to assemble yourself, and they are the first thing a reader meets on a page for a single unit.

What 590 kilograms is measuring

The description sets out a foot-operated ratcheting lever that raises one wheel onto castors so a car, a boat or a trailer can be skated sideways without a jack going under the chassis. On that account the rating belongs to one corner of one vehicle, held by this one unit, and the page never spells that out. It leaves 1180 and 2360 standing in front of 590 in its own opening line, which is the wrong way round for anyone reading quickly.

Hard surfaces is the whole of the qualification

This description says the jack rolls smoothly on a range of hard surfaces, and hard is as far as the qualification goes. Gradient, slope, incline and level ground go unmentioned throughout, and no floor finish is named either. The steel is described as powder-coated, which is the only surface treatment the page commits to, and the castors are nylon on needle bearings with two of them said to lock.

Key features

• Single-unit purchase: the contents line reads 1 x T-Rex H13 Vehicle Positioning Jack and nothing else is itemised.
• Powder-coated steel frame: the coating is named here, where the wheels are given separately as nylon.
• Pedal-driven ratchet: a foot lever with a wide rubber tread does the lifting rather than a hand crank or a pump.
• Two locking castors of the four: the listing says the position can be secured on two, without identifying them.
• Tyre width ceiling of 275mm: the specification sets the limit as a millimetre figure and the prose sets it as a 275 series.
• Hand-carried between jobs: a handle is described for moving the unit about the workshop.

Specifications

• Listed brand: T-Rex
• Listed model: H13
• Capacity of this unit: 590 kg
• Frame and rollers: steel
• Wheels: nylon
• Tyre width limit: 275mm
• Castor diameter, unit missing: a bare 4
• Jack footprint and height: 61 x 61 x 21cm, listed in the order width, length, height
• Mass of the jack: 16kg
• Carton footprint and height: 61 x 63 x 22cm, in the same order
• Mass of the carton: 20kg

Read before ordering one

• Two units make 1180 kg and four make 2360 kg. Only 590 kg belongs to what ships, and nobody has adjusted a number here to make that plainer.
• Nobody wrote a unit after the castor figure. A bare 4 could mean inches or centimetres, wheels sixty millimetres apart in diameter, and nobody has chosen one here.
• Nobody cites a standard, an approval or a certification, and no working load limit is set down. Whether 590 kg means a rating or a ceiling goes unsaid.
• Nobody states a lift height. How far the wheel rises off the floor goes unrecorded.
• Nobody warns against getting underneath a vehicle resting on one of these. That sentence does not exist here, and we have put nothing in its place.
• Nobody gives an address, a code or a reference for the user manual the description promises online, and nobody describes the minimal assembly named on the same line.
• Nobody identifies the optional storage rack the description offers separately: no model, no code, no size.
• Nobody attaches a margin of error to any of the figures above. The supplier prints none and we have not gone elsewhere for one.
• Three apostrophes have been dropped, two out of contractions and one out of a possessive. Because the description carries no apostrophe at all, nothing within it can serve as an undamaged model. Those words are not set out again above.
• Nobody offers a warranty or a guarantee, and nobody records where the jack is built.

One unit, one wheel, 590 kilograms; the other two capacity figures on the page are for purchases nobody has made yet.

We accept Change of Mind returns for 14 days after you have received the item in cases where you have changed your mind or made an incorrect purchase and wish to return the product. This also applies to orders canceled when the item has already been dispatched from our warehouse. The item must be in a re-saleable condition to qualify for a change of mind refund. Deductions may apply including Initial and Return Shipping, as well as restocking fee of 10% of the product price