Giantz Tractor Seat Forklift Excavator Truck Universal Digger Chair PU Leather

The seat is usually the first thing to fail on an older tractor or digger. Foam collapses, the suspension stops damping, the vinyl splits and lets water into what is left. This Giantz replacement is a complete steel-framed unit with its own suspension, sliding rails and adjustable backrest, supplied in one carton for assembly on site.

The measurement the supplier leaves out

Read this first, because it is the single reason replacement machinery seats get sent back. The supplier publishes an overall size of 61 x 50 x 59 cm and nothing at all about the mounting hole centres underneath — no bolt spacing front to back, no spacing side to side, no slide rail width. Without those figures nobody can tell you whether it will bolt straight onto your existing mounts. Before ordering, get underneath your current seat, measure the hole centres in both directions, and send them to us so the supplier can be asked. A universal machinery seat means a seat built to no particular machine, and on a bolt-in item that distinction costs you a drilled bracket or a return.

Suspension set to the operator, 50 to 130 kg

The suspension adjusts to operator weight across a stated range of 50 to 130 kg, with 60 mm of travel. Setting it to your own weight is what stops the seat either bottoming out over a rut or riding high and doing nothing. Note what that figure is and is not: it is the adjustment range the suspension covers, not a load rating, and no separate capacity is published. Nor does the supplier say what kind of suspension it is — mechanical spring and air systems behave quite differently over a long shift, and this record names neither.

150 mm of slide and a backrest that tilts

Fore and aft adjustment runs to 150 mm on the rails, which is enough to move an operator through most pedal and lever reaches. The backrest angle adjusts separately, and armrests are fitted. Padding is high density foam under PU leather, both in the supplier's wording, on a steel frame. It arrives as one package and assembly is required, so allow time and a spanner set for the day it turns up.

Key features

• Steel frame: the structural part of the seat, with PU leather over high density foam.
• Weight-adjustable suspension: set between 50 and 130 kg, with 60 mm of travel.
• Slide rails: 150 mm of fore and aft movement.
• Adjustable backrest angle: the back tilts independently of the seat base.
• Armrests fitted: included on the seat as supplied.
• One carton, assembly required: it ships flat and goes together on site.

Specifications

• Frame material: steel
• Upholstery: PU leather over high density foam
• Operator weight adjustment: 50-130 kg
• Suspension travel: 60 mm
• Fore and aft adjustment: 150 mm
• Overall size: 61 x 50 x 59 cm
• Colour: black
• Assembly: required
• Packages: 1
• Supplier code: TS-ARM25-BK
• Mounting hole centres: not published — measure your existing mounts and ask us before ordering
• Suspension type, seat height range, backrest height, rail width and net weight: the supplier states none of them
• Load rating and any seat, belt or rollover protection standard: nothing is claimed, and nothing should be inferred

What's in the box

• 1 x Tractor Seat, per the supplier's pack list, shipped as a single package for assembly

Before you bolt it in

• Mounting is on you. With no hole centres published, confirm the bolt pattern against your machine before ordering. This is the main cause of returns on seats of this type.
• No standards are claimed. The supplier names no seat, seat belt or rollover protection standard, and none is implied here. If your machine's seat forms part of an operator protection system, or carries a belt anchorage or a presence switch, have the replacement assessed by a competent person before the machine is worked.
• Off-road machinery only. Nothing in this record supports use in a road-registered vehicle.
• Title versus feature list. The title names forklifts, excavators, diggers and trucks; the supplier's feature list describes a universal replacement seat for tractors, and the pack contents read "1 x Tractor Seat". Check the fit against your own machine rather than the title.

Measure your mounting centres and send them through, and the supplier can be asked before you buy.