Car Fuel Line Disconnect Removal Tools, Car Transmission Oil Cooler Line Remover Quick Disconnect Kit Includes 3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/8 Inch for Ford, Mazda, Chrysler

Eleven tools covering eight opening sizes, 3/16 inch through to 7/8 inch, is what buys you a set instead of one lonely spoon: the quick-connect collar you need to release is seldom the one you guessed at from the driveway. The smell of petrol on your hands is the ordinary end of this job, and choosing the right opening first time is most of what keeps it to that.

Eleven tools across eight sizes, and how that adds up

The supplier's breakdown gives one each of 3/16, 1/4, 5/16, 5/8, 3/4 and 7/8 inch, two of 3/8 inch and three of 1/2 inch. That totals eleven across eight distinct openings, so the pack tally and the size list agree with each other. No reason is offered for doubling one size and tripling another. The product title lists the eight sizes and quotes no total at all; eleven is a figure this description alone gives.

What the plastic is, and what you are not told about it

The supplier writes high-quality plastic and stops there. No polymer is named, which leaves nylon, acetal and something a good deal cheaper all reading identically on the page, and the fuel-and-solvent resistance claimed in the same breath cannot be measured against any grade. High hardness, wear resistance, corrosion resistance and a smooth surface are asserted alongside it, none of them attached to a figure.

Live fuel lines and an absent safety note

These are made to open fuel, cooling and transmission oil-cooler lines while they sit in the car, and the supplier's whole cautionary content is one sentence asking you to match the opening to the outside diameter of your lines before buying. Depressurising a fuel system, ignition sources, working pressure, any standard at all: none of it appears. Read that as a gap in the paperwork rather than as reassurance, and follow your vehicle's manual.

Key features

• Eight openings in one roll: 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4 and 7/8 inch, so the guesswork happens on the bench and not under the car.
• 3/8 inch doubled, 1/2 inch tripled: those two sizes arrive in multiples, which covers a split or mislaid tool without a second order.
• Three line types named: the supplier lists fuel lines, cooling lines and transmission oil-cooler fittings, plus other quick-disconnect couplings unspecified.
• Sized for the pinch points: the tools are described as thin enough to push into the narrow space around a line connection rather than needing the joint pulled clear first.
• Marques the supplier commits to: Ford, Mazda and Chrysler by name, plus other vehicles fitted with automatic transmissions.
• Light enough to leave in the boot: lightweight and compact are the supplier's terms; no weight or overall dimension is printed for any piece.

Specifications

• Tools per kit: 11
• Distinct opening sizes: 8, from 3/16 inch to 7/8 inch
• Duplicated openings: 3/8 inch x2, 1/2 inch x3
• Body material as written: unnamed high-quality plastic
• Systems addressed: fuel, cooling and transmission oil-cooler lines

The gaps in the paperwork

• A tool for opening live fuel lines arrives with no depressurisation instruction, no fire or ignition caution and no pressure rating. The supplier's single note is about sizing before purchase, not about safety during use.
• The polymer is not identified anywhere in the record, which leaves the fuel-and-solvent resistance claim unverifiable. We publish the claim as the supplier's, not as ours.
• Two clauses are all the working method the supplier prints: snap the right size onto the tube, then push firmly. We have added nothing to it, and it should not be read as a complete method for your car.
• One stored size line has lost a space that should follow its comma, running an inch size hard up against the quantity behind it. Loss is what that fault is called, a single space gone and no digits touched, which is why the eight sizes appear cleanly above instead of in their damaged shape.
• The title claims Chrysler, while the marketing blurb names Ford and Mazda alone. The description you are reading keeps all three marques.
• Matching your opening size to the outside diameter of a line is advice printed by the supplier, worth acting on with the car cold and a vernier rather than an eye.

Bought as a set, this is the box you reach for when a line will not part by hand and the alternative lying on the bench is a screwdriver.

Returns, Refunds, and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.