6 Pack Racing Fuel Filler Jug Hose 14 Inch Transparent Gas Can Hose with 3 Pack Bender Clear Fuel Filler for Racing Container Tank 3/5/5.5 Gallon Gas Can

Decanting from a jug into a bike tank or a mower is where fuel ends up on paintwork, on the ground and on you. A filler hose with a valve on the end turns that into a controlled pour.

You can see what is happening

The hose is thick-walled clear PVC, so the fuel column stays visible the whole way down. On a tank you cannot see into, that flow is your gauge: it tells you when the jug has emptied, when air is being drawn through, and when to close the valve. The PVC is specified to resist breaking, tearing and fading — what usually finishes off a cheap hose left in the sun on a trailer.

A valve and a filter at the working end

Each hose carries a single-sided iron clamp and a control valve, so flow stops at the hose instead of by tipping the jug back upright mid-pour. A built-in filter at the outlet catches debris before it reaches the tank — worth having on any container that has sat in a shed pulling dust in through its vent. The three elbow benders angle the outlet into a filler neck that will not take a straight run.

Key features

• Six hoses per pack: spares for the trailer and the shed.
• Three elbow benders: angle the outlet where a straight hose will not reach.
• Control valve on each hose: start and stop the pour without moving the jug.
• Built-in outlet filter: catches debris before it enters the tank.

Specifications

• Thread size: 3/4 in
• Hose material: thick transparent PVC
• Fittings: single-sided iron clamp, control valve, built-in filter
• Container compatibility: supplier lists racing jugs of 3, 5 and 5.5 gallons; no litre equivalent published
• Stated uses: SUVs, racing cars, mowers, motorcycles, off-road equipment, boats
• Hose length: quoted inconsistently by the supplier — see below

What's in the box

• 6 x fuel filler hoses
• 3 x elbow benders

Handling fuel safely

• Hose length is given two different ways in the supplier's own material: 14 inches in the product title, and about 15.55 in (39.5 cm) in the detail. Check the length you need before ordering rather than relying on either figure.
• Petrol vapour is heavier than air and ignites from a spark. Decant outdoors, clear of any flame, pilot light, running engine or hot exhaust, and do not smoke.
• Fuel moving through plastic builds a static charge. Stand a portable container on the ground rather than in a ute tray or on a tow bar, and keep the outlet in contact with the filler neck while pouring.
• No Australian fuel container or hose standard is named for this product. If you are carrying or decanting fuel in a vehicle, the compliance check is yours to make.
• Check every threaded joint and clamp for weeping before you tip a full jug.

Keep a couple made up and ready, and refuelling at the track or on the property stops being the messy part.

Returns, Refunds, and Replacements

Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.