10pcs Hose Clamp Cars Motorcycle Fuel Line Jubilee Petrol Pupe Clips Garden DIY Tools

Ten clamps in five sizes, two of each, and the sizes are ranges rather than steps: 8 to 18, 13 to 23, 14 to 27, 11 to 20 and 18 to 25 millimetres. Four of the five begin inside another one, so cover across the 8 to 27 millimetre span is thick through the middle and thin at both ends. A 16 millimetre hose can take any of eight clamps out of this pack. A 9 millimetre hose, or a 26 millimetre one, can take two.

Read all five before you reach

The lines do not climb in order, so hunting a size means working through the whole list instead of stopping at the first one wide enough. On a bench that costs nothing. Leaning over a guard with one hand already full, it is a nuisance. Sorted by their lower figures the five run 8 to 18, 11 to 20, 13 to 23, 14 to 27 and 18 to 25.

Described at length, specified not at all

You get those five ranges and a single instruction: a flathead screwdriver tightens and loosens them. You do not get a material. Steel, stainless, zinc, plating and coating are words this listing never uses, and along with them go band width, thread size, pressure and temperature. Rust resistance is asserted by the search summary alone, over a description naming nothing that could resist anything, and the weaker position is ours to publish.

Named for fuel lines, silent on fuel

Fuel, petrol, garden lines and DIY work all appear where the set is named and summarised. Its description raises no application whatsoever, offers no pressure or temperature figure, and says nothing about winding a clamp up too hard, which is how this kind of fastener usually fails. Anything headed for a fuel line deserves a check that this page cannot support.

Key features

• Ten clamps, five ranges: two clamps at each of the sizes listed.
• Screw-tightened band: each clamp is opened and closed with a flat blade.
• Span of the set: the five ranges together stretch from 8 millimetres to 27 millimetres.
• Overlapping, not graduated: most diameters in the middle of that stretch are covered by more than one clamp.
• One tool for the lot: nothing beyond a flathead is called for anywhere.

Specifications

• Clamps in the pack: 10
• Size ranges: 2 x 8-18mm, 2 x 13-23mm, 2 x 14-27mm, 2 x 11-20mm, 2 x 18-25mm
• Tightened with: a flathead screwdriver

Where the page stops

• Not one material is named: not steel, not stainless, not zinc, and no plating or coating either.
• Band width goes unstated, so how wide a footprint each clamp puts on a hose is anyone's guess.
• Pressure goes unrated. So does temperature, on a set whose heading points it at fuel lines.
• Thread size and screwdriver size are both absent, though a flat blade is the one tool required.
• Rust resistance lives only in the search summary; nothing anywhere could support it.
• Jubilee is a heading word and a search word. The description does not once use it.
• Whether these can be undone and used again is not addressed.
• No maker, no model, nowhere of manufacture, and nothing cites a standard.
• Every one of the ten size figures is printed bare. No allowance is offered against any of them, and we have supplied none.
• The heading prints Pupe where Pipe belongs, and the intended word occurs nowhere on the listing. It stands as stored and remains uncorrected.

Ten clamps that genuinely come to ten, over a span you can measure, from a page telling you nothing else about them at all.