Tire Repair Rubber Nails Kit with 2 Sizes,2026 Tire Repair Tools for Car,Motorcycle,Bike,Tire Repair Screws,Screw in Tire Repair Plugs with Screwdriver (40PC)

A screw picked up on a fire trail does not care that you are two hours from a tyre shop. Rubber repair nails go into the tread from the outside with the wheel still on the vehicle, which turns a recovery into a twenty-minute stop. Forty of them, in two diameters, in a box that lives under the seat.

Two diameters, because holes are not one size

The kit carries a small plug at 0.21 x 0.46 inch and a large one at 0.27 x 0.5 inch, published in the units the supplier uses and deliberately not converted, since these are the figures you match to the hole. A plug narrower than the puncture will not seal against the casing; one much larger fights its way in and can tear the surrounding rubber. Having both to hand means the decision is made at the tyre rather than in the shop. The supplier does not state how the forty pieces are divided between the two sizes, so if the split matters to you, ask us before ordering.

Screwed in rather than pushed in

The construction is rubber formed around an iron core, which is what lets the plug take a driving action instead of needing a reamer and a hollow insertion needle. The supplier describes the insertion as rapid and tool-free, directly into the puncture, with no need to break the tyre off the rim. Note that the title also lists a screwdriver in the kit, which sits awkwardly against the tool-free description — both are set out here as published. Either way, the rubber body is what forms the seal against the hole while the core carries the driving force.

It gets you to a tyre shop, and no further

Worth being blunt about, because the packaging never is. A plug is a temporary external repair. It closes the hole at the tread face and tells you nothing about the damage on the inside — casing cords can be cut where the outer surface looks intact, and a tyre run soft after a puncture can be damaged in ways that never show from outside. The tyre needs to come off the rim, be inspected internally by a tyre professional, and then be properly repaired or replaced. No maximum speed and no maximum distance are stated by the supplier for a tyre carrying one of these, and neither figure is invented here.

Key features

• Forty pieces: enough for a long trip and to restock afterwards.
• Two plug sizes: 0.21 x 0.46 inch and 0.27 x 0.5 inch, matched to the hole.
• Rubber over an iron core: a sealing body around a shank stiff enough to drive.
• Storage box included: keeps the plugs together and clean in a vehicle kit.
• Wheel stays on: the repair is made from outside, without breaking the bead.

Specifications

• Quantity: 40 pieces total. The split between the two sizes is not published
• Small plug: 0.21 x 0.46 inch, exactly as published and not converted
• Large plug: 0.27 x 0.5 inch, exactly as published and not converted
• Material: rubber with an integrated iron core
• Tyre type: tubeless only
• Vehicles the supplier names: cars, motorcycles, bicycles and electric scooters
• Storage: supplied in a box
• Screwdriver: listed in the title; the description instead describes tool-free insertion
• "2026" in the title: marketing wording, not a specification

Using one, and what has to follow

• Plugs are for punctures through the tread only. Damage to a sidewall or a shoulder is not repairable and the tyre must be replaced.
• Book the tyre in with a professional for an internal inspection and a permanent repair or replacement at the first opportunity. Treat the plug as the means of getting there.
• A tyre that has been driven on while flat, even a short way, may be damaged inside. Have it inspected rather than plugged.
• Reinflate to the correct pressure before moving off, then re-check it once you have covered a few kilometres.
• Gloves and eye protection are worth the trouble here, because forcing a plug into a tread takes real effort and tools slip.

Keep the box with the jack rather than in the shed, since that is where it earns its keep.

Returns, Refunds, and Replacements

Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

• For customers in Victoria, approximately 7-10 working days;
• For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
• For customers in WA, NT, and TAS, approximately 9-12 working days.