Positive Battery Terminal Connector For Nissan Toyota Lexus 243407F000 90982-05037 Black Brass Replacement Part

A battery terminal that has gone powdery green under the cover is a slow-burning problem. The car starts fine one morning and turns over like a flat battery the next, and scrubbing the post only buys a few weeks once the clamp has lost its grip. This is a positive-side terminal in brass, sold as an aftermarket replacement.

Brass carries the current the clamp has to pass

The body is brass, finished in black. Material matters more here than on a trim part, because this joint sits between the battery post and every circuit in the car. A poor conductor, or a joint that has started to corrode inside the clamp, shows up first as lazy cranking and dimming lights rather than as an outright failure, which is why the fault often gets blamed on the battery. The supplier states 12 volts, covering ordinary passenger-car electrics.

The two numbers that decide whether it fits

The terminal bolts onto an 8 mm stud and has an 18 mm opening, with a securing nut supplied. Measure both on the terminal you are removing, because those figures decide the fit far more reliably than the model name does. Note that the supplier describes installation as needing no tools while also supplying a clamping nut, so have a spanner and a socket ready. Torque is not published, so tighten to your vehicle manufacturer's figure rather than by feel.

Vehicles and cross-reference numbers

The supplier names Nissan, Toyota, Infiniti and Lexus, calling out Altima, Maxima and Murano specifically, and gives cross-reference numbers 243407F000 and 90982-05037. Those numbers are for matching against the part you are removing, not a claim that this is a manufacturer-supplied item. The listing also carries a universal-fitment flag, which contradicts having two specific part numbers — work from the numbers and the named models, and check yours before ordering.

Key features

• Brass construction: a copper alloy body at the highest-current joint in the vehicle.
• 8 mm stud fixing: bolt-on replacement, no cutting or crimping of the existing cable.
• 18 mm cable opening: sized for the original cable it replaces — measure yours to confirm.
• Nut supplied: the clamping nut is in the pack, so nothing extra to source.
• Two cross-references published: 243407F000 and 90982-05037 for matching.

Specifications

• Part: positive battery terminal
• Material: brass
• Colour: black
• Stud size: 8 mm
• Opening: 18 mm
• Voltage: 12 volts
• Overall size: 5 x 5 x 5 cm
• Cross-reference numbers: 243407F000, 90982-05037
• Terminal polarity: positive only — no negative terminal supplied

What's in the box

• 1 x positive battery terminal (nut included)

Before you fit this

• Disconnect the negative terminal first and keep spanners clear of the body while working on the positive side.
• Confirm the 8 mm stud and 18 mm opening against your existing terminal before ordering.
• Battery and charging work is best left to a qualified person if you are unsure; check the vehicle starts and charges normally before relying on it.

Match the cross-reference number to your own part and the fit should be straightforward. Get in touch if you want it confirmed first.

Returns, Refunds, and Replacements

Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

For customers in Victoria, approximately 7-10 working days;
For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
For customers in WA, NT, and TAS, approximately 9-12 working days.