Automotive Connector Car Motorcycle Electrical Plug Socket Kit 2/3/4 Pin Way 2P 4P

Total length is entered as 20 cm and cable length as 10 cm, the only two figures in centimetres anywhere on the page. The packing line says one pair, a male half docking into a female half, while the number of ways sits in the specification as 2, 3 or 4 pins with optional written after it. Which of the three you would be sent is fixed nowhere on the page.

The heading counts higher than the packing line does

Up top this is a kit, and the listing summary promotes it to a set. Underneath, the supplier answers with a quantity of one pair, then says one pair again in the packing list. One pair is what this page carries, being the smaller claim and the better supported one. The 2P 4P run onto the end of the title picks two of the three pin counts the supplier itself leaves optional.

Nothing here tells you what the joint will stand

Current passes through this part, and the supplier commits to no current figure, no voltage, no wire gauge, no working temperature and no ingress protection. Fusing goes unmentioned too, so nothing here tells you what this join is rated to carry. The words Fire/Flame Retardant appear as a feature with no standard cited behind them, no test named and no level given, so they stand here as the supplier's words and nothing more.

Ten sorts of vehicle and no loom named at all

The application sentence runs cars, mopeds, quads, tricycles, caravans, motorcycles, ATVs, scooters, boats, snowmobiles, and closes on an etc. Ten types, with nothing after them to narrow the field: no factory loom, no plug this one replaces, no make or model. Breadth stated that way describes the shape of a connector, not its compatibility, and that shape is rectangular, pressed together, with a hook to hold it.

Key features

• One pair to an order: two halves that dock together, counted the same way in the quantity line and the packing list.
• Terminals at 2.8 mm: the model line and a feature line give the same figure for the metal inside.
• Pressed home and hooked: the engagement style is push-in and a retaining hook is named as part of it.
• Copper at the contact: copper is what the supplier names where the two halves meet.
• Ten centimetres of the twenty are cable: both figures are printed, and the difference between them is never broken down.
• Rectangular, in white and brass: one shape and one colour pair are offered, with no alternative listed.

Specifications

• Name on the listing: car connector (male and female docking)
• Ways as filed: 2, 3 or 4 pins, marked optional
• Model designation: 2.8MM
• Engagement style: push-in (press-in)
• What the housing is moulded from: ABS
• Metal at the contact: Copper
• Insulation as named: plastic
• Colour pair on file: White+ Brass
• Cable run: 10cm
• Whole assembly measures: 20cm

Before you wire anything to it

• No amperage, voltage, gauge, temperature or ingress figure has been supplied, and none has been estimated on this page to fill the hole. Size the circuit and its protection from the wire and the load, not from this listing.
• Scope of application is entered twice, once as connecting harness and once as cable, and the two lines say nothing different.
• A brand name, SUKIY, appears only inside the supplier's own text. The customer-service promise attached to it stays there rather than becoming an offer from this store.
• Character damage, Loss: a feature line reads Made of high quality materials, and ends there, on the comma, with whatever followed it gone.
• Character damage, Substitution: the phrase products, Please contact us carries a capital P where a lower-case one belongs, the mark of a find-and-replace run over the text.
• Two notes close the supplier text. One warns that display brightness will shift the colour you see against the photograph; the other asks for tolerance on any figure taken by hand.

One pair of push-together halves, sized in millimetres and centimetres and specified in no electrical unit at all.

Returns, Refunds, and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.