600ml Spray Paint Gun Cup Air Gravity Feed Paint Spray Auto Car Pot Threaded Connector Capacity for Spray Gun White

A cracked cup or a lid that has stopped sealing puts a perfectly good spray gun out of action, and nobody sells the cup on its own with the gun. This is that spare: a 600 ml gravity-feed pot in white, with a stainless threaded connector and a vented screw-on lid.

The thread is the fitment, and its size is not published

This is the part to settle before ordering, because a cup either threads onto your gun or it does not. Gun makers use different connector threads and there is no single standard across them. The supplier states that the feed connector is stainless steel and that it is threaded — and stops there. No thread size, no pitch, no standard and no named gun model appear anywhere in the source, so none is stated here, and no compatibility with any brand of gun is claimed. Compare the connector in the photographs against the one on your own gun, or measure the thread on the cup you are replacing, before you order.

Six hundred millilitres, sitting above the gun

Gravity feed means the pot mounts on top and the coating falls into the fluid passage rather than being drawn up from below. It empties more completely than a siphon pot, which matters when you are mixing expensive two-pack by the cup rather than by the litre, and it will keep feeding at low trigger pressure. Six hundred millilitres is a working size: enough for a bonnet or a bumper in one fill, not so much that a half-mixed cup is a costly mistake. The lid screws down and locks, and the supplier describes a vent in the removable cap — that vent is what stops the cup pulling a vacuum and starving the gun mid-panel.

Key features

• 600 ml pot: a full panel per fill without carrying dead weight on the gun.
• Stainless threaded connector: a metal feed thread rather than a moulded plastic one.
• Vented removable cap: lets air in as the level drops so flow stays even.
• Locking screw lid: described by the supplier as drip-free when closed.

Specifications

• Capacity: 600 ml
• Type: gravity feed cup
• Body material: plastic, described by the supplier as high hardness and oil resistant
• Connector: stainless steel, threaded
• Lid: removable, vented, screw-on with a locking action
• Colour: white
• Quantity: 1 cup
• Thread size, pitch and standard: not published by the supplier
• Compatible gun models: none named by the supplier, and none claimed here

Before you use it

• Atomised coating hangs in the air and is breathed in. Work outdoors or in a properly extracted booth, and wear respiratory protection matched to the coating you are spraying. A dust mask does not qualify. Two-pack and isocyanate materials call for air-fed protection.
• Whatever you are spraying arrives with a label and a safety data sheet. Those documents set out thinning, handling, protective equipment and storage, and they take precedence over anything written in a listing for a cup.
• No solvent or coating compatibility is claimed for this plastic beyond the oil resistance the supplier states. Check the material you intend to hold in it.
• Keep solvent-based coatings and their vapour away from sparks and naked flame, and wear eye protection and gloves.

Measure the thread on your gun first. Get that right and the rest of this is straightforward.

Returns, Refunds, and Replacements

Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

• For customers in Victoria, approximately 7-10 working days;
• For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;
• For customers in WA, NT, and TAS, approximately 9-12 working days.