2 Pack White Abs Thru Hull Skin Fitting For Bilge Pump Hose 19Mm 3/4" Marine Boat Drain Outlet Connector

One size is printed on this listing and it checks out. The fitting is given as 19mm and as 3/4 inch, and three-quarters of an inch is 19.05 mm, so those are the same fitting stated twice rather than two different ones. What the figure measures is the diameter the hose pushes onto. Nothing else about the part is measured: no length, no flange, no barb, no wall thickness and no weight.

What the description actually describes

Read end to end, the description covers one operation: push the bilge pump hose onto the fitting and secure it with a clamp. That is a hose connection, and it is the only fitting the page ever describes. No thread is specified anywhere, no backing nut is mentioned, no hull thickness range is given, and nothing says whether this may be used below the waterline. Those are the things a fitting that penetrates a hull is normally chosen on, and this listing supplies none of them.

High pressure, and no figure for it

Twice the description says these fittings withstand high pressure and twice it puts no number against the phrase. The leak claim wants the same care. A bullet says they are designed to provide a tight and secure connection with no leaks or water seepage, and designed to is the hedge that belongs on that sentence. The feature line making the same claim has lost its verb, so what survives there reads harder than the bullet does. The gentler wording is the one published here, and Leak-Proof is treated as the supplier's label rather than as a test result.

Key features

• 19 mm, and 3/4 inch agrees: the metric and imperial figures are consistent throughout, and the arithmetic between them is right.
• A pair per packet: the quantity line and the contents line both say two.
• ABS, white: one material and one colour, each stated once.
• Hose goes on, clamp goes over: the description's whole account of fitting it, given twice in near-identical wording.
• Beyond bilge pumps: the page says use is not limited to bilge pumps and names drains on boats and other water-related equipment.
• What the page calls it: a marine drainage outlet, which is the supplier's own name for the part.

Specifications

• What the page calls the part: marine drainage outlet
• The material stated: ABS
• Colour as filed: white
• Diameter given: 19mm, or 3/4 inch
• Quantity on the page: 2 pieces
• Package content, as printed: 2pcs marine yacht and speedboat drainage outlet
• Uses the page names: bilge pump hose, and drains on boats or other water-related equipment

Before you cut anything

• No thread is given, no backing nut is named and no hull thickness range appears. The only fitting method described is hose pushed on and clamped.
• Nothing on the page says whether this fitting may be used below the waterline, and nothing there describes it passing through a hull at all.
• High pressure is claimed twice and quantified neither time. There is no pressure figure, no temperature range, no material standard and no approval mark, and no warning of any sort is printed here.
• The clamp appears in both installation sentences and is specified in neither. No size, no type, and it is not on the contents list.
• The search summary calls the pair corrosion-proof. The description does not use the word corrosion at any point. Its own wording is that they withstand tough marine conditions, and that is the claim carried over.
• A feature line prints the size as 19mm (34), the slash and the inch mark both gone. The intact forms sit elsewhere on the page as 19mm 3/4 inch, and 34 is not a size, so it has not been repaired into one here.
• A sentence about materials has lost its noun. It reads made of reliable materials, these are designed to last, and the space that sat either side of the missing word is still in place, so this is a word lost rather than two words welded together. Two bullet labels are a word short as well, one reading Reliable and Materials and the other simply Applications. None of it has been reconstructed.
• Two notes come from the supplier itself. Its figures are read off by hand, so a small deviation is to be expected on the 19mm; and white as a screen paints it will not be precisely the white lifted out of the packet.

The hose end of this fitting is specified and the arithmetic on it holds; the end that goes into the boat is described by nothing at all, so treat the size as settled and the rest as your own question to answer.

Returns, Refunds, and Replacements Products that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.

Delivery Timeframe

Please note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:

For customers in Victoria, approximately 7-10 working days; For customers in NSW, SA, ACT, and QLD, approximately 9-12 working days; For customers in WA, NT, and TAS, approximately 9-12 working days.