{"title":"Lifts, Jacks \u0026 Hoists","description":"Vehicle lifts, jacks, electric hoists and lifting gear.","products":[{"product_id":"tire-removal-clamp-hand-tires-removal-clamp-tire-lever-repair-tool-and-spare-parts-tire-bead-jack-koolstop-tire-bead-jack-koolstop-tire-bead-jack","title":"Tire Removal Clamp, Hand Tires Removal Clamp Tire Lever Repair Tool and Spare Parts Tire Bead Jack Koolstop Tire Bead Jack Koolstop Tire Bead Jack","description":"\u003cp\u003eSome tyres simply will not go back on by hand. The last stretch of bead sits proud of the rim, and levering it over with a plastic tyre lever risks pinching the tube against the rim wall — the puncture you create while fixing the puncture you had. A bead jack clamps the rim and rolls the bead over instead of prising it.\u003c\/p\u003e\u003ch2\u003eHow it works, and what it is actually for\u003c\/h2\u003e\u003cp\u003eThe slotted jaw hooks under the tyre bead, the other end locates on the opposite side of the rim, and closing the handles rolls the bead up and over the rim edge in one movement. Because the load is spread through the tool rather than concentrated on a lever tip, nothing is being forced against a single point of the rim. The supplier describes it as a clip-in action, and anti-slip grips and a wire latch to hold the handles closed for storage.\u003c\/p\u003e\u003ch2\u003eThis is a bicycle tool, and the listing should say so\u003c\/h2\u003e\u003cp\u003eWorth being plain about, because the title is not. The source describes it as suiting \u003cstrong\u003eMTB and road bike tyres\u003c\/strong\u003e, fitting tyre widths up to 3 inches, and preventing punctures to \u003cstrong\u003einner tubes\u003c\/strong\u003e. Those are bicycle specifications. It is not sized or intended for car, 4WD or trailer tyres, and it will not seat a light truck bead. If you came to this listing looking for something to fit a vehicle tyre, this is not it.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRolls rather than levers:\u003c\/strong\u003e the bead is worked over the rim without a lever tip digging into it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube protection:\u003c\/strong\u003e the design is intended to keep the tube clear of the pinch point during seating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-slip grips:\u003c\/strong\u003e textured handles for wet or greasy hands.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWire latch:\u003c\/strong\u003e holds the handles together so it packs flat in a workshop drawer or a ride bag.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e engineering nylon plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 31.5 × 9 × 2.5 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum tyre width:\u003c\/strong\u003e 3 inches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuits:\u003c\/strong\u003e MTB and road bicycle tyres, per the supplier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRim sizes:\u003c\/strong\u003e not published\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e not published\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e not published\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eUsing it without damage\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeflate completely first.\u003c\/strong\u003e Any bead work starts with all the air out — a partially inflated tyre fights the tool and the bead will not move.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWatch your fingers.\u003c\/strong\u003e The handles close under load and a bead that lets go suddenly moves fast.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeep the tube clear.\u003c\/strong\u003e Push the tube up into the tyre and away from the rim wall before working the bead over.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRim finish:\u003c\/strong\u003e the supplier states the plastic will not scratch rims. No test backs that up, so treat carbon or polished rims with care and check as you go.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSold as an aftermarket bicycle workshop tool. Check the 3 inch maximum tyre width against what you actually run before ordering.\u003c\/p\u003e\u003cimg title=\"V1192-AZ-W-3953\" alt=\"V1192-AZ-W-3953\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1192-AZ-W-3953\"\u003e\u003cimg title=\"V1192-AZ-W-3953\" alt=\"V1192-AZ-W-3953\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1192-AZ-W-3953\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54263507583303,"sku":"V1192-AZ-W-3953","price":21.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883424977223_a5a7979a-bcd3-4c1e-aaf3-43b098b99a27.png?v=1783645260"},{"product_id":"heavy-duty-2-layer-600d-polyester-jack-cover-for-electric-tongue-jacks-on-campers-rvs-and-trailers-features-double-pull-drawstring-cord-locks-and-reinforced-seams-for-outdoor-use-black","title":"Heavy-Duty 2-Layer 600D Polyester Jack Cover for Electric Tongue Jacks on Campers, RVs, and Trailers—Features Double-Pull Drawstring, Cord Locks, and Reinforced Seams for Outdoor Use (Black)","description":"\u003cp\u003eAn electric tongue jack lives at the very front of the drawbar, where it collects every stone thrown off the tow vehicle and sits out in the weather between trips. The motor housing and the switch are the parts that suffer. A slip-on cover in 600D polyester is the cheapest thing standing between them and another summer.\u003c\/p\u003e\u003ch2\u003eMeasured against the jack, not the trailer\u003c\/h2\u003e\u003cp\u003eThis is where fit is won or lost. The cover is cut for electric jacks of roughly 35.6 cm high, 12.7 cm wide and 25.4 cm deep, and the supplier is careful to call those figures approximate. Jack bodies vary a good deal between brands and between model years, so take a tape to your own before ordering: height from the top of the casing down, then width and depth across the housing. If yours is a non-standard unit, that measurement is the whole decision.\u003c\/p\u003e\u003ch2\u003eTwo drawstrings and an open bottom\u003c\/h2\u003e\u003cp\u003eThe bottom is open, so the cover drops straight over the jack post with nothing to disassemble and nothing to unbolt. Two independent drawstrings then pull it in, each with its own side-mounted cord lock, which is what lets you tension the front and back evenly instead of ending up with one side gaping. Even tension is also what keeps it on the drawbar at highway speed rather than in someone's windscreen. No zips, no clips, nothing to seize up with grit in it.\u003c\/p\u003e\u003ch2\u003e600D in two layers, and what that is for\u003c\/h2\u003e\u003cp\u003e600D describes the weight of the yarn in the weave, and the fabric here is doubled rather than single. That combination is aimed at abrasion — the rubbing and snagging a cover takes from being pulled on and off, stowed wet, and dragged past a coupling. The seams are double-stitched along the edges for the same reason, since a cover almost always fails at a seam before the cloth gives out. Black hides the road film that a drawbar cover collects within a week.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-layer 600D polyester:\u003c\/strong\u003e doubled woven fabric, aimed at abrasion rather than at weatherproofing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwin drawstrings with cord locks:\u003c\/strong\u003e tension each side independently, no tools and no knots.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-stitched seams:\u003c\/strong\u003e reinforcement where covers usually let go first.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen-bottom slip-on:\u003c\/strong\u003e goes over the post without removing anything from the jack.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 600D polyester, two-layer construction\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits jacks of approximately:\u003c\/strong\u003e 14 in (35.6 cm) high, 5 in (12.7 cm) wide, 10 in (25.4 cm) deep\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure:\u003c\/strong\u003e double-pull drawstring with side cord locks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase:\u003c\/strong\u003e open bottom, slip-on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications listed by the supplier:\u003c\/strong\u003e electric tongue jacks on campers, RVs and trailers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWaterproof rating, UV rating and pack weight:\u003c\/strong\u003e not published\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eFitting and care\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTake the cover off before raising or lowering the jack. Never run the jack with it on.\u003c\/li\u003e\n\u003cli\u003eIt is not a sealed or submersible cover. The supplier states it reduces incidental moisture but does not prevent condensation forming inside during a long wet spell, so lift it occasionally and let the jack dry.\u003c\/li\u003e\n\u003cli\u003eSpot clean with mild soap and water only. No machine washing, no bleach and no dry cleaning — the supplier warns that heavy wetting can affect the seams.\u003c\/li\u003e\n\u003cli\u003eKeep hooks, tools and sharp edges away from it. The fabric resists tearing but it will still puncture.\u003c\/li\u003e\n\u003cli\u003eMeasure your jack before ordering. The dimensions above are approximate and the supplier says so.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTen seconds to fit, and the jack motor stops being the thing that fails first on the drawbar.\u003c\/p\u003e\u003ch2\u003eReturns, Refunds and Replacements\u003c\/h2\u003e\u003cp\u003eProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.\u003c\/p\u003e\u003ch2\u003eDelivery Timeframe\u003c\/h2\u003e\u003cp\u003ePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFor customers in Victoria, approximately 7-10 working days;\u003c\/li\u003e\n\u003cli\u003eFor customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;\u003c\/li\u003e\n\u003cli\u003eFor customers in WA, NT, and TAS, approximately 9-12 working days.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cimg title=\"V1107-CS-FCMTFST\" alt=\"V1107-CS-FCMTFST\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1107-CS-FCMTFST\"\u003e\u003cimg title=\"V1107-CS-FCMTFST\" alt=\"V1107-CS-FCMTFST\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1107-CS-FCMTFST\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54263786864967,"sku":"V1107-CS-FCMTFST","price":27.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883494838599.png?v=1783665830"},{"product_id":"chain-sling-10-mm-x-300-cm-lifting-chains-with-hooks-g80-engine-chain-hoist-lifts-8-ton-8344-kg-lifting-sling-chains-for-engine-hoist-engine-lift-chain-with-4-leg-grab-hooks-adjusters","title":"Chain Sling, 10 mm x 300 cm Lifting Chains with Hooks, G80 Engine Chain Hoist Lifts, 8 Ton\/8344 kg Lifting Sling Chains for Engine Hoist, Engine Lift Chain with 4 Leg Grab Hooks \u0026 Adjusters","description":"\u003cp\u003eAn engine coming out on a hoist is dead weight, and the only thing between it and the concrete is the chain. This is a four-leg lifting sling with grab hooks and adjusters. Everything below is quoted the way the supplier states it, because the load figures on this listing do not agree with each other and a lifting assembly is the wrong place to guess.\u003c\/p\u003e\u003ch2\u003eWhat the supplier states about capacity\u003c\/h2\u003e\u003cp\u003eThree figures appear across this listing and they are not the same number. The title reads 8 Ton \/ 8344 kg. The supplier's own description reads \"Maximum Working Capacity: 18,400 lbs\". No breaking strength is published anywhere on the listing, and nothing states whether the figure applies to one leg, to two legs, or to the assembled four-leg sling at a particular included angle — which, on a multi-leg sling, changes the answer entirely. Work to the lowest of the three, and have the assembly assessed by a competent person before it takes weight.\u003c\/p\u003e\u003ch2\u003eChain, hooks and the four adjusters\u003c\/h2\u003e\u003cp\u003eThe chain is described as G80 manganese steel with alloy steel hooks, joined by what the supplier calls full-automatic welding. G80 is a grade designation, carried here exactly as the supplier gives it: no standard is named anywhere on this listing, so nothing on this page is a certification, a test result or a compliance statement. The four adjusters shorten each leg independently, which is how an off-centre load such as a gearbox or a differential housing is brought level instead of hanging on one corner.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain diameter:\u003c\/strong\u003e 10 mm per the title; 3\/8 in per the supplier's description — the two are not identical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain length:\u003c\/strong\u003e 300 cm per the title; 10 ft per the supplier's description\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity stated in the title:\u003c\/strong\u003e 8 Ton \/ 8344 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity stated in the description:\u003c\/strong\u003e \"Maximum Working Capacity: 18,400 lbs\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasis of the rating:\u003c\/strong\u003e not given — no breaking strength is published, and single-leg versus multi-leg and working angle are unspecified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLegs:\u003c\/strong\u003e four, each with a grab hook and an adjuster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain material:\u003c\/strong\u003e G80 manganese steel, per the supplier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook material:\u003c\/strong\u003e alloy steel, per the supplier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNamed standard or certification:\u003c\/strong\u003e none stated by the supplier\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore you lift with this\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThis is lifting equipment. It is not vehicle recovery gear and must never be used to snatch, tow or winch — those are dynamic loads and they will wreck a lifting chain.\u003c\/li\u003e\n\u003cli\u003eInspect every link, hook and adjuster before each use, and retire the sling if any part is cut, gouged, cracked, corroded, bent, worn or stretched.\u003c\/li\u003e\n\u003cli\u003eNever shock-load it. Take the slack up slowly and lift smoothly.\u003c\/li\u003e\n\u003cli\u003eNo load may pass over a person, and nobody stands beneath a suspended load.\u003c\/li\u003e\n\u003cli\u003eSeat the load in the bowl of the hook, never on the tip. The supplier is explicit on that point.\u003c\/li\u003e\n\u003cli\u003eDo not twist, knot or turn the chain back on itself.\u003c\/li\u003e\n\u003cli\u003eAny lifting sling should be inspected by a competent person to the relevant standard before it goes into service, and at the intervals that standard sets.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSuited to engine hoists and general workshop lifting. Check the figures above against your own load, and get the assembly signed off before it carries anything.\u003c\/p\u003e\u003cimg title=\"V952-DGDLHHMGFH1JVNVOQV0\" alt=\"V952-DGDLHHMGFH1JVNVOQV0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-DGDLHHMGFH1JVNVOQV0\"\u003e\u003cimg title=\"V952-DGDLHHMGFH1JVNVOQV0\" alt=\"V952-DGDLHHMGFH1JVNVOQV0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-DGDLHHMGFH1JVNVOQV0\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54263797580103,"sku":"V952-DGDLHHMGFH1JVNVOQV0","price":243.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883496018247.png?v=1783665888"},{"product_id":"manual-lever-chain-hoist-6t-6000kg-capacity-heavy-duty-come-along-3m-lift-g80-alloy-steel-chain-with-dual-pawl-mechanical-brake-360-rotating-hooks-for-warehouse-construction-garage","title":"Manual Lever Chain Hoist, 6T 6000KG Capacity Heavy Duty Come Along, 3M Lift G80 Alloy Steel Chain With Dual Pawl Mechanical Brake, 360° Rotating Hooks, for Warehouse Construction Garage","description":"\u003cp\u003eA seized engine mount, a fallen tree across the driveway, a steel beam that needs shifting fifty millimetres to the left — none of those jobs come with a power point nearby. A lever hoist works off your arm, so the only thing it needs is somewhere solid to hook onto.\u003c\/p\u003e\u003ch2\u003eRatchet it, don't crank it\u003c\/h2\u003e\u003cp\u003eThe lever swings through a short arc rather than a full turn, which is what makes this useful in a wheel arch or between two pallets where a chain block's hand chain would never fit. Its handle rotates through 360 degrees and carries a non-slip grip, so you can set it at whatever angle the job leaves you. A three-position selector switches between lift, neutral and lower. Neutral is the one that saves time: it frees the chain so you can pull it out to length by hand before any load goes on, instead of ratcheting metre after metre.\u003c\/p\u003e\u003ch2\u003eHow the load stays put\u003c\/h2\u003e\u003cp\u003eLoad holding comes down to the brake, and this one uses a Weston dual pawl mechanism that engages against the gear train instead of relying on a single catch. Two pawls share the holding force, which spreads pressure across more metal and is the reason the supplier describes it as resisting slip and sudden drops. Practically, it means the load stays where you stopped it when you let go of the lever, and the descent when you do lower it is controlled rather than a run-away. Less shock loading through the mechanism also means fewer worn parts over its life.\u003c\/p\u003e\u003ch2\u003eChain, hooks and three metres of reach\u003c\/h2\u003e\u003cp\u003eLifting chain is graded, and G80 alloy is the industrial grade — heat-treated so it takes the load in tension without stretching the way mild steel links do. Here it runs 10 mm thick over a 3 m (10 ft) lift, galvanised against rust for outdoor and wash-down work. An upgraded guided slot keeps the chain feeding cleanly rather than jamming at the entry point, and the hooks swivel through 360 degrees so you can line the hoist up with an awkward anchor without putting a twist through the chain.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeston dual pawl brake:\u003c\/strong\u003e two pawls engage the gear train, so the load stays where you stopped it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eG80 alloy chain:\u003c\/strong\u003e 10 mm galvanised links over a 3 m lift, sized for industrial work rather than occasional use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-position selector:\u003c\/strong\u003e lift, neutral or lower, changed with a flick of the lever.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360-degree handle and hooks:\u003c\/strong\u003e set the lever and the anchor at whatever angle the job allows.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuided chain slot:\u003c\/strong\u003e keeps the chain feeding evenly instead of snagging at the entry point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll-steel body:\u003c\/strong\u003e the supplier describes it as resisting impact and breakage on site.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated capacity (title):\u003c\/strong\u003e 6 t \/ 6000 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated capacity (supplier feature text):\u003c\/strong\u003e 6T \/ 13200 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasis of rating:\u003c\/strong\u003e not stated by the supplier — no single-fall or double-fall figure is given\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLift height:\u003c\/strong\u003e 3 m (supplier also states 10 Ft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain:\u003c\/strong\u003e G80 alloy steel, 10 mm, galvanised\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake:\u003c\/strong\u003e Weston dual pawl mechanical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e 360-degree rotating, non-slip grip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHooks:\u003c\/strong\u003e 360-degree rotating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e three-position selector — lift \/ neutral \/ lower\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e all-steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore you lift with it\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe rated capacity is quoted here exactly as the supplier gives it. The supplier does not state whether that figure applies to a single or a double chain fall, so check the rating plate on the unit itself before you load it, and work to whichever figure is lower.\u003c\/li\u003e\n\u003cli\u003eNo standard, certification or third-party test rating is claimed for this hoist. The supplier names none, so none is stated here.\u003c\/li\u003e\n\u003cli\u003eA hoist lifts and holds a load — it is not a work support. Never stand, reach or work under a suspended load. Block, crib or transfer the load onto rated stands before anyone goes underneath it.\u003c\/li\u003e\n\u003cli\u003eInspect the chain, hooks and hook latches for wear, stretch or distortion before every lift, and keep the pull in line with the chain rather than dragging it sideways.\u003c\/li\u003e\n\u003cli\u003eThe anchor point carries everything the hoist does. Rate it accordingly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSized for workshop, warehouse and site work — engine removals, steel erection, machinery moves — wherever there is a solid anchor overhead and no power point within reach.\u003c\/p\u003e\u003cimg title=\"V952-CGKSBHLHL6T1EG5BT001V0\" alt=\"V952-CGKSBHLHL6T1EG5BT001V0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-CGKSBHLHL6T1EG5BT001V0\"\u003e\u003cimg title=\"V952-CGKSBHLHL6T1EG5BT001V0\" alt=\"V952-CGKSBHLHL6T1EG5BT001V0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-CGKSBHLHL6T1EG5BT001V0\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54263801053511,"sku":"V952-CGKSBHLHL6T1EG5BT001V0","price":194.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883496313159.png?v=1783665918"},{"product_id":"electric-winch-4500-kg-load-capacity-12v-dc-truck-winch-with-φ8-3-mm-x-19-8-m-steel-rope-wireless-wired-remote-control-ip55-waterproof-for-towing-suv-jeep-trailer-boat-off-road-vehicle","title":"Electric Winch, 4500 kg Load Capacity, 12V DC Truck Winch with Φ8.3 mm x 19.8 m Steel Rope, Wireless \u0026 Wired Remote Control, IP55 Waterproof for Towing SUV Jeep Trailer Boat Off-Road Vehicle","description":"\u003cp\u003eSand at half tide, a rear diff sitting on a hidden rut, and no second vehicle within twenty kilometres. That is the moment a winch stops being an accessory. Bolted to a cradle up front, it turns a recovery into a slow, controlled pull you can run on your own.\u003c\/p\u003e\u003ch2\u003eGearing built for the long slow pull\u003c\/h2\u003e\u003cp\u003eA 265:1 reduction is deep, and it is spread across three planetary stages rather than one. That matters because each stage only has to multiply torque a little, so no single set of gears carries the whole load and the heat generated has more metal to sink into. The practical result is a winch that tolerates a long, slow pull — the kind of drag that gets a bogged ute out of soft sand a hundred millimetres at a time — instead of only short bursts. The 3 HP motor supplies the input, and the deep reduction converts it into line pull rather than speed.\u003c\/p\u003e\u003ch2\u003eSteel rope, and where to stand\u003c\/h2\u003e\u003cp\u003eThe rope is 8.3 mm steel, 19 strands laid up rather than a solid cable, running 19.8 m from the drum. Steel takes abrasion — dragging over rock shelves, through gravel, against a bar — better than synthetic line does, and it does not soak up water. The trade-off is that steel stores energy under tension, which is why the wireless remote's roughly 18 m (59 ft) range earns its keep: you can stand well clear of the rope while the drum turns. A 3 m (9.8 ft) wired remote comes along too, for the days the wireless has no signal or a flat battery.\u003c\/p\u003e\u003ch2\u003eBuilt to work wet and dusty\u003c\/h2\u003e\u003cp\u003eRecoveries happen in the weather you would rather be inside from. The housing is coated alloy with IP55 sealing, which covers dust ingress and water sprayed from any direction — rain, road spray, a hose at the end of the day. It is not an immersion rating, so a crossing deep enough to put the winch under is still asking too much of it. Alloy also sheds heat faster than a steel case, which is useful on a pull long enough to warm the motor.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree-stage planetary drive:\u003c\/strong\u003e 265:1 reduction spread over three gear sets, so no one set carries the whole multiplication.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e19-strand steel rope:\u003c\/strong\u003e 8.3 mm by 19.8 m, chosen for abrasion resistance over rock and gravel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo remotes:\u003c\/strong\u003e wireless for working at a distance, wired as the backup that never needs a battery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP55 sealing:\u003c\/strong\u003e rated against dust and sprayed water, in a coated alloy housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 V DC:\u003c\/strong\u003e runs off the vehicle's own electrical system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated capacity (product title):\u003c\/strong\u003e 4500 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated pull (supplier feature text):\u003c\/strong\u003e 10,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasis of rating:\u003c\/strong\u003e not stated — the supplier does not say whether this is a first-layer, single-line figure\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 3 HP, 12 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGearing:\u003c\/strong\u003e three-stage planetary, 265:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope:\u003c\/strong\u003e 8.3 mm (21\/64 in) 19-strand steel, 19.8 m (65 ft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing:\u003c\/strong\u003e IP55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e coated alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless remote range:\u003c\/strong\u003e 59 ft as quoted by the supplier (about 18 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired remote lead:\u003c\/strong\u003e 9.8 ft as quoted by the supplier (about 3 m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinch:\u003c\/strong\u003e with the steel rope already spooled on the drum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFairlead:\u003c\/strong\u003e guides the rope onto the drum through the bumper or cradle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook:\u003c\/strong\u003e for the working end of the rope.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower cables:\u003c\/strong\u003e for the connection back to the battery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemotes:\u003c\/strong\u003e wireless handset and wired controller.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore you mount it\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe two capacity figures above are both the supplier's own and are listed separately rather than reconciled. Neither has been converted or rounded here, and the supplier does not state the basis for either.\u003c\/li\u003e\n\u003cli\u003eNo standard, certification or test rating is claimed for this winch. The supplier names none.\u003c\/li\u003e\n\u003cli\u003eThis is a recovery winch, rated for pulling. No lifting or load-suspension rating is given, so do not use it as a hoist or to hold a load overhead.\u003c\/li\u003e\n\u003cli\u003eThe supplier describes the mounting pattern as suiting most SUVs, utes and Jeeps. Measure the bolt spacing on your own bull bar or winch cradle against the winch before you order, and check that the mount and the vehicle are rated for the loads a winch puts through them.\u003c\/li\u003e\n\u003cli\u003eSteel rope under tension holds energy. Lay a damper or heavy blanket over the line, keep bystanders out of the arc, and never step over a loaded rope.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA sensible fit for a touring 4WD, a work ute or a trailer and boat setup where the recovery gear needs to earn its keep occasionally rather than every weekend.\u003c\/p\u003e\u003cimg title=\"V952-GSSDDJP10000NEA5P001V9\" alt=\"V952-GSSDDJP10000NEA5P001V9\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-GSSDDJP10000NEA5P001V9\"\u003e\u003cimg title=\"V952-GSSDDJP10000NEA5P001V9\" alt=\"V952-GSSDDJP10000NEA5P001V9\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-GSSDDJP10000NEA5P001V9\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54263805968711,"sku":"V952-GSSDDJP10000NEA5P001V9","price":426.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883496902983.png?v=1783665919"},{"product_id":"electric-winch-4500-kg-load-capacity-12v-dc-truck-winch-with-φ8-9-mm-x-27-4-m-synthetic-rope-wireless-wired-remote-control-ip67-waterproof-for-towing-off-road-suv-jeep-trailer-boat","title":"Electric Winch, 4500 kg Load Capacity, 12V DC Truck Winch with Φ8.9 mm x 27.4 m Synthetic Rope, Wireless \u0026 Wired Remote Control, IP67 Waterproof for Towing Off-Road SUV Jeep Trailer Boat","description":"\u003cp\u003eSteel winch rope is heavy, it kinks, and a broken strand will find its way through a glove. Synthetic line weighs a fraction of the same length and coils back onto the drum without memory. On a loaded tourer where every kilogram sitting ahead of the front axle counts, that is a swap worth making.\u003c\/p\u003e\u003ch2\u003eTwenty-seven metres of 12-strand line\u003c\/h2\u003e\u003cp\u003eThe line is 8.9 mm 12-strand polyethylene, braided rather than twisted, and the supplier rates it for UV exposure and for the strand-on-strand friction that comes from spooling under load. At 27.4 m (90 ft) there is enough of it to reach past the nearest scrubby sapling to a tree actually worth anchoring to, or to run out and back through a snatch block when the pull needs to be gentler. Grit is synthetic rope's enemy rather than rust: rinse the sand out and let it dry before it spends a month sitting on the drum.\u003c\/p\u003e\u003ch2\u003eTension you can see, and a brake that holds\u003c\/h2\u003e\u003cp\u003eTwo things on this winch tell you when to stop. A four-layer rope guide keeps the line laying evenly across the drum instead of piling up at one end, where the effective drum diameter changes and the pull changes with it. Alongside it, a red warning zone marks the point at which tension is getting away from you, so overload becomes something you can see coming rather than hear. The brake locks the drum when the motor stops, which is what keeps a half-recovered vehicle from rolling back down the slope you have just dragged it up.\u003c\/p\u003e\u003ch2\u003eA bigger motor, a tighter seal\u003c\/h2\u003e\u003cp\u003eBehind the drum sits a 5.5 HP motor turning through a 218.4:1 three-stage planetary reduction — three sets of gears sharing the multiplication, so none of them takes the whole load and the case has somewhere to put the heat. The winch is sealed to IP67, which covers dust completely and brief immersion rather than spray alone. In practice that is the difference between a winch that shrugs off a wash-down and one that will survive a crossing which briefly puts it under. The body is coated aluminium alloy.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12-strand synthetic rope:\u003c\/strong\u003e 8.9 mm by 27.4 m, light enough to hand-feed to a distant anchor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e218.4:1 planetary reduction:\u003c\/strong\u003e three stages sharing the torque multiplication rather than one gear set taking it all.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-layer rope guide:\u003c\/strong\u003e lays the line evenly so the drum diameter, and the pull, stay predictable.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed warning zone:\u003c\/strong\u003e a visual tension marker, so overload is something you notice before it bites.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 sealing:\u003c\/strong\u003e dust-tight, and rated for brief immersion rather than spray alone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking brake:\u003c\/strong\u003e holds the drum against rollback when the motor stops.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated capacity (product title):\u003c\/strong\u003e 4500 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated pull (supplier feature text):\u003c\/strong\u003e 10,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasis of rating:\u003c\/strong\u003e not stated by the supplier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 5.5 HP, 12 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGearing:\u003c\/strong\u003e three-stage planetary, 218.4:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope:\u003c\/strong\u003e 8.9 mm (7\/20 in) 12-strand polyethylene, 27.4 m (90 ft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing:\u003c\/strong\u003e IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e coated aluminium alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope guide:\u003c\/strong\u003e four-layer, with red tension warning zone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless remote range:\u003c\/strong\u003e 59 ft as quoted by the supplier (about 18 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired remote lead:\u003c\/strong\u003e 9.8 ft as quoted by the supplier (about 3 m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore you rig it\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBoth capacity figures above come from the supplier and are published separately because they do not match exactly. Neither has been converted, combined or rounded here, and no basis is given for either.\u003c\/li\u003e\n\u003cli\u003eNo standard, certification or test rating is claimed for this winch, because the supplier names none.\u003c\/li\u003e\n\u003cli\u003eRated for pulling only. The supplier gives no lifting or suspension rating, so this is not a hoist and nothing should be held above anyone with it.\u003c\/li\u003e\n\u003cli\u003eCheck that your bumper, cradle or mounting plate and its fixings are rated for the load a winch of this size transmits, and that the vehicle's battery and charging system can carry the draw.\u003c\/li\u003e\n\u003cli\u003eSynthetic line still stores energy under load. Use a damper, keep clear of the rope's arc, and inspect the braid for cuts, glazing and UV damage before each recovery.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSuited to a touring 4WD, a boat trailer or a work vehicle that gets into places where the ground is soft and the nearest help is a long way back.\u003c\/p\u003e\u003cimg title=\"V952-HCSDDJP100008DXYL001V9\" alt=\"V952-HCSDDJP100008DXYL001V9\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-HCSDDJP100008DXYL001V9\"\u003e\u003cimg title=\"V952-HCSDDJP100008DXYL001V9\" alt=\"V952-HCSDDJP100008DXYL001V9\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-HCSDDJP100008DXYL001V9\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54263812653383,"sku":"V952-HCSDDJP100008DXYL001V9","price":480.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883497460039.png?v=1783665947"},{"product_id":"electric-winch-5400-kg-load-capacity-12v-dc-truck-winch-with-φ9-5-mm-x-28-m-synthetic-rope-wireless-wired-remote-control-ip67-waterproof-for-towing-off-road-suv-jeep-trailer-boat","title":"Electric Winch, 5400 kg Load Capacity, 12V DC Truck Winch with Φ9.5 mm x 28 m Synthetic Rope, Wireless \u0026 Wired Remote Control, IP67 Waterproof for Towing Off-Road SUV Jeep Trailer Boat","description":"\u003cp\u003eA dual-cab loaded for a fortnight away, with a camper on the tow ball, weighs a long way more than the same ute did in the showroom. A winch that coped with the empty version will sit there straining. This one is rated by the supplier at 5400 kg, quoted in its feature text as 12,000 lbs.\u003c\/p\u003e\u003ch2\u003eTorque before speed\u003c\/h2\u003e\u003cp\u003eWinching is not about speed. The 6.6 HP motor spins fast and makes relatively little torque; the 218.4:1 three-stage planetary gearbox trades those revolutions away and hands back pulling force at the drum. Splitting the reduction over three stages keeps any one set of gears from carrying the full multiplication, which is why a planetary box handles a sustained drag better than a single deep-cut gear pair would. What you feel at the hook is a line that comes in slowly and holds steady while a heavy vehicle grinds forward through mud.\u003c\/p\u003e\u003ch2\u003eRope thick enough to grip\u003c\/h2\u003e\u003cp\u003eAt 9.5 mm the line is thick enough to hold properly with a gloved hand, which matters when you are feeding it out across a creek bed and back to an anchor. It is 12-strand polyethylene braid, which the supplier rates against UV and against the strand friction generated as the rope crosses itself on the drum. There is 28 m of it, so an anchor point three cars back is still reachable. Synthetic line also stays flexible when it is cold, and it does not develop the hooked broken strands that make old steel cable unpleasant to handle.\u003c\/p\u003e\u003ch2\u003eSealed, guided, braked\u003c\/h2\u003e\u003cp\u003eThree details do the unglamorous work. The IP67 sealing keeps dust out entirely and tolerates brief immersion, so mud and shallow crossings are not automatically fatal. A four-layer rope guide feeds the line onto the drum in order rather than letting it bunch, which protects both the rope and the even pull you want from it. A red warning zone flags when tension is climbing past where you want it, giving you a reason to reposition or rig a snatch block instead of pushing on. And the brake holds the drum against rollback.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e6.6 HP motor:\u003c\/strong\u003e 12 V, sized to drive the deep planetary reduction under a sustained load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9.5 mm synthetic rope:\u003c\/strong\u003e 28 m of 12-strand braid, thick enough to handle comfortably in gloves.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e218.4:1 three-stage planetary:\u003c\/strong\u003e converts motor revolutions into drum torque across three gear sets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP67 sealing:\u003c\/strong\u003e dust-tight and rated for brief immersion, not spray alone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-layer rope guide and red warning zone:\u003c\/strong\u003e even spooling, and a visible cue before tension gets away from you.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwin remotes:\u003c\/strong\u003e wireless for standing clear, wired for when the handset is flat.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated capacity (product title):\u003c\/strong\u003e 5400 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated pull (supplier feature text):\u003c\/strong\u003e 12,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasis of rating:\u003c\/strong\u003e not stated by the supplier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 6.6 HP, 12 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGearing:\u003c\/strong\u003e three-stage planetary, 218.4:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope:\u003c\/strong\u003e 9.5 mm (3\/8 in) 12-strand polyethylene, 28 m (92 ft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing:\u003c\/strong\u003e IP67\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e coated aluminium alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope guide:\u003c\/strong\u003e four-layer, with red tension warning zone\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless remote range:\u003c\/strong\u003e 59 ft as quoted by the supplier (about 18 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired remote lead:\u003c\/strong\u003e 9.8 ft as quoted by the supplier (about 3 m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore your first pull\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe metric and imperial capacity figures above are both the supplier's, published separately because they are not exact equivalents of one another. Nothing has been converted or rounded on this page.\u003c\/li\u003e\n\u003cli\u003eThe supplier states no standard, certification or test rating for this winch, so none is claimed here.\u003c\/li\u003e\n\u003cli\u003eThis is a pulling rating, not a lifting one. No overhead or suspension rating is given, and the winch should not be used to hold a load above anybody.\u003c\/li\u003e\n\u003cli\u003eA winch at this rating puts serious load into whatever it is bolted to. Confirm that your winch cradle, bull bar and chassis mounting points are rated for it, and that the fixings are the correct grade.\u003c\/li\u003e\n\u003cli\u003eKeep a damper on the line, stand out of the rope's arc, and check the braid for cuts, heat glazing and abrasion before every recovery.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWorth a look if the vehicle is heavy, loaded, or towing — and if the recoveries you get into tend to be uphill.\u003c\/p\u003e\u003cimg title=\"V952-HCSDDJP12000QOPIX001V9\" alt=\"V952-HCSDDJP12000QOPIX001V9\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-HCSDDJP12000QOPIX001V9\"\u003e\u003cimg title=\"V952-HCSDDJP12000QOPIX001V9\" alt=\"V952-HCSDDJP12000QOPIX001V9\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-HCSDDJP12000QOPIX001V9\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54263812718919,"sku":"V952-HCSDDJP12000QOPIX001V9","price":485.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883497492807.png?v=1783665947"},{"product_id":"electric-winch-5400-kg-load-capacity-12v-dc-truck-winch-with-φ9-1-mm-x-23-m-synthetic-rope-wireless-wired-remote-control-ip55-waterproof-for-towing-off-road-suv-jeep-trailer-boat","title":"Electric Winch, 5400 kg Load Capacity, 12V DC Truck Winch with Φ9.1 mm x 23 m Synthetic Rope, Wireless \u0026 Wired Remote Control, IP55 Waterproof for Towing Off-Road SUV Jeep Trailer Boat","description":"\u003cp\u003eMost winches sit unused for months, then get asked to do everything in one muddy afternoon. What matters on that afternoon is a drum that turns under real load and a remote that connects first time. This one combines a 5.5 HP motor with a deep 265:1 reduction and 23 m of synthetic line.\u003c\/p\u003e\u003ch2\u003e265 to 1 is a lot of reduction\u003c\/h2\u003e\u003cp\u003eReduction ratio is the number that decides how hard a winch pulls for a given motor. At 265:1 the drum turns once for every 265 turns of the armature, and all of that gearing down is torque multiplication. Spread across three planetary stages, the multiplication happens in three smaller steps, so each gear set is under less strain than a single deep reduction would put it. The cost is line speed: a recovery on this winch is a slow business. The benefit is that slow, heavy, sustained pulling is exactly what it is geared to do.\u003c\/p\u003e\u003ch2\u003eTwenty-three metres on the drum\u003c\/h2\u003e\u003cp\u003eThe rope is 9.1 mm 12-strand synthetic, 23 m long, which the supplier rates against sunlight, wear and breakage. Twenty-three metres is a working length rather than a generous one, so a tree-trunk protector and an extension strap are worth carrying for the times the only solid anchor sits further back than that. The wireless remote reaches about 18 m (59 ft), far enough to stand off to the side of the rope instead of in line with it, and a 3 m (9.8 ft) wired remote is included for when the battery in the handset has gone flat in the glovebox.\u003c\/p\u003e\u003ch2\u003eWhat IP55 actually covers\u003c\/h2\u003e\u003cp\u003eIP55 describes two things: enough sealing to keep dust out of the working parts, and enough to shrug off water sprayed from any angle. Rain, road spray and a hose-down after a beach trip are all inside that. Full immersion is not, so treat a deep crossing as something to protect the winch from rather than test it with. The body is coated alloy, and the coating is what stops salt from a boat ramp finding bare metal.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e265:1 reduction:\u003c\/strong\u003e deep gearing that favours steady pulling force over line speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5.5 HP motor:\u003c\/strong\u003e 12 V, running off the vehicle's own battery and charging system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9.1 mm synthetic rope:\u003c\/strong\u003e 23 m of 12-strand line, lighter over the front axle than steel of the same length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-remote control:\u003c\/strong\u003e wireless out to about 18 m, plus a wired handset as backup.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP55 coated alloy body:\u003c\/strong\u003e sealed against dust and sprayed water.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated capacity (product title):\u003c\/strong\u003e 5400 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated pull (supplier feature text):\u003c\/strong\u003e 12,000 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasis of rating:\u003c\/strong\u003e not stated by the supplier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 5.5 HP, 12 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGearing:\u003c\/strong\u003e three-stage planetary, 265:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope:\u003c\/strong\u003e 9.1 mm (0.36 in) 12-strand synthetic, 23 m (75.5 ft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing:\u003c\/strong\u003e IP55\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e coated alloy\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless remote range:\u003c\/strong\u003e 59 ft as quoted by the supplier (about 18 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired remote lead:\u003c\/strong\u003e 9.8 ft as quoted by the supplier (about 3 m)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe winch:\u003c\/strong\u003e synthetic rope already wound onto the drum.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFairlead:\u003c\/strong\u003e feeds the line through the bar or mounting plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook:\u003c\/strong\u003e fitted to the running end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower cables:\u003c\/strong\u003e to run the supply back to the battery.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless and wired remotes:\u003c\/strong\u003e both controllers, so there is a fallback on the day.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRead this before you winch\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe capacity figures above are the supplier's own, in the supplier's own units, listed separately rather than merged. No conversion, rounding or interpretation has been applied, and the basis of the rating is not given.\u003c\/li\u003e\n\u003cli\u003eThe supplier claims no standard, certification or test rating, so this listing claims none either.\u003c\/li\u003e\n\u003cli\u003eRated for recovery pulling. There is no lifting or suspension rating in the supplier's information, so it should not be used as a hoist.\u003c\/li\u003e\n\u003cli\u003eThe supplier describes the mounting as suiting most SUVs, utes and Jeeps. Check your own bolt pattern and confirm the bar, cradle and chassis mounts are rated for winching loads before fitting.\u003c\/li\u003e\n\u003cli\u003eKeep a damper over the line, stand clear of its arc, and inspect the rope for cuts, glazing and UV degradation before each use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA reasonable match for a heavier 4WD or a boat-and-trailer setup where the winch needs to be there and working on the day it is finally called on.\u003c\/p\u003e\u003cimg title=\"V952-HCSDDJP120000Z8JO001V9\" alt=\"V952-HCSDDJP120000Z8JO001V9\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-HCSDDJP120000Z8JO001V9\"\u003e\u003cimg title=\"V952-HCSDDJP120000Z8JO001V9\" alt=\"V952-HCSDDJP120000Z8JO001V9\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-HCSDDJP120000Z8JO001V9\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54263814422855,"sku":"V952-HCSDDJP120000Z8JO001V9","price":417.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883497591111.png?v=1783665947"},{"product_id":"chain-sling-8-mm-x-300-cm-lifting-chains-with-hooks-g80-engine-chain-hoist-lifts-5-ton-lifting-sling-chains-for-engine-hoist-engine-lift-chain-with-4-leg-grab-hooks-adjusters-heavy-duty","title":"Chain Sling, 8 mm x 300 cm Lifting Chains with Hooks, G80 Engine Chain Hoist Lifts, 5 Ton Lifting Sling Chains for Engine Hoist, Engine Lift Chain with 4 Leg Grab Hooks \u0026 Adjusters Heavy Duty","description":"\u003cp\u003eThree metres is the length quoted on this sling, though the listing never says whether that measures one leg or the whole assembly. That matters when you are working out whether four legs will reach an engine's lifting eyes from a hoist hook. The load figures need the same care, so here they are as written.\u003c\/p\u003e\u003ch2\u003eThe numbers, and the basis nobody supplies\u003c\/h2\u003e\u003cp\u003eTwo capacity figures appear and they are worded differently. The title says 5 Ton. The supplier's description says \"Maximum Working Capacity: 11,000 lbs\". Neither carries a basis. Nothing states whether the figure belongs to a single leg, to two legs sharing, or to the whole four-leg assembly at a stated included angle — and on a multi-leg sling the angle changes the answer. No breaking strength is published at all. Work to the lower figure, and get the sling signed off by someone competent before any load goes on it.\u003c\/p\u003e\u003ch2\u003eWhat G80 means here, and what it does not\u003c\/h2\u003e\u003cp\u003eMaterials are given as manganese steel chain to G80, with hooks in alloy steel, and the welding is described by the supplier as fully automatic. Treat G80 strictly as a supplier grade marking. Not one standard is named across the whole listing, which means nothing on this page constitutes certification, a test result, or any claim of compliance. The four adjusters shorten each leg independently. An awkward casting, or a gearbox that does not sit over its own centre, can then be trimmed square rather than tipping and loading one corner while the other three go slack.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour legs:\u003c\/strong\u003e each with its own grab hook and adjuster.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndependent leg adjustment:\u003c\/strong\u003e trim an uneven load square before it leaves the bench.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrab hooks:\u003c\/strong\u003e shorten a leg by taking a link directly, with no extra fittings to lose.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook and chain materials:\u003c\/strong\u003e alloy steel hooks running on chain the supplier marks G80.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWelded assembly:\u003c\/strong\u003e described by the supplier as full-automatic welding.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e title gives 8 mm; supplier description gives 5\/16 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e title gives 300 cm; supplier description gives 10 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhether the length is per leg or overall:\u003c\/strong\u003e not stated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity in the title:\u003c\/strong\u003e 5 Ton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity in the description:\u003c\/strong\u003e \"Maximum Working Capacity: 11,000 lbs\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasis of either figure:\u003c\/strong\u003e not given — working versus breaking, single-leg versus four-leg, and working angle are all unstated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaking strength:\u003c\/strong\u003e not published\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLegs:\u003c\/strong\u003e four, every one carrying a grab hook plus its own adjuster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain:\u003c\/strong\u003e manganese steel, supplier grade marking G80\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHooks:\u003c\/strong\u003e alloy steel, as stated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNamed standard, certification or test:\u003c\/strong\u003e none stated\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRules for a chain that carries a load overhead\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLifting equipment, not recovery gear. This must never be used to snatch, winch or tow a vehicle — a dynamic load will destroy a lifting chain.\u003c\/li\u003e\n\u003cli\u003eCheck every link, hook and adjuster before each lift. Retire the sling if anything is cut, nicked, cracked, corroded, bent, worn or stretched.\u003c\/li\u003e\n\u003cli\u003eBring the slack up slowly. Never shock-load it.\u003c\/li\u003e\n\u003cli\u003eNothing passes over a person, and nobody stands under a suspended load.\u003c\/li\u003e\n\u003cli\u003eThe load belongs in the throat of the hook, not on its tip; the supplier says so directly.\u003c\/li\u003e\n\u003cli\u003eNo twisting, knotting or turning the chain back on itself.\u003c\/li\u003e\n\u003cli\u003eHave a competent person assess the sling against the relevant standard before first use, then re-inspect on whatever schedule that standard requires.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBuilt for engine hoist work and general lifting around a workshop. Take the figures above to a competent person and have the sling passed before it lifts anything at all.\u003c\/p\u003e\u003cimg title=\"V952-DGDLHHMGFH1JG4PKZV0\" alt=\"V952-DGDLHHMGFH1JG4PKZV0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-DGDLHHMGFH1JG4PKZV0\"\u003e\u003cimg title=\"V952-DGDLHHMGFH1JG4PKZV0\" alt=\"V952-DGDLHHMGFH1JG4PKZV0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-DGDLHHMGFH1JG4PKZV0\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54263816257863,"sku":"V952-DGDLHHMGFH1JG4PKZV0","price":157.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883497754951.png?v=1783665947"},{"product_id":"chain-sling-8-mm-x-150-cm-lifting-chains-with-hooks-g80-engine-chain-hoist-lifts-5-ton-lifting-sling-chains-for-engine-hoist-engine-lift-chain-with-4-leg-grab-hooks-adjusters-heavy-duty","title":"Chain Sling, 8 mm x 150 cm Lifting Chains with Hooks, G80 Engine Chain Hoist Lifts, 5 Ton Lifting Sling Chains for Engine Hoist, Engine Lift Chain with 4 Leg Grab Hooks \u0026 Adjusters Heavy Duty","description":"\u003cp\u003eHeadroom disappears quickly under a low workshop gantry, and a long sling eats what is left. This is the 150 cm version — although the listing never states whether that measures a single leg or the assembled sling, which is the first thing to pin down.\u003c\/p\u003e\u003ch2\u003eSame chain, shorter reach\u003c\/h2\u003e\u003cp\u003eEverything about the chain matches the longer version in this range: 8 mm by the title, 5\/16 in by the description, four legs, grab hooks and adjusters throughout. Only the length changes, quoted as 150 cm in the title and 5 ft in the description. Short legs pull at a steeper included angle for the same spread across a load, and steeper angles put more tension into each leg — which happens to be exactly the variable this listing never quantifies.\u003c\/p\u003e\u003ch2\u003eTwo capacity figures, no stated basis\u003c\/h2\u003e\u003cp\u003eThe title carries 5 Ton. The supplier's description carries \"Maximum Working Capacity: 11,000 lbs\". They are worded differently and neither has been converted into the other here. Neither is qualified either: nothing states whether the number applies to a single leg or to the four-leg assembly, nothing distinguishes a working load from a breaking strength, and no included angle is specified. No breaking strength appears anywhere. Take the lower of the two, and get the sling assessed before it takes weight.\u003c\/p\u003e\u003ch2\u003eTrimming four legs to an awkward load\u003c\/h2\u003e\u003cp\u003eEvery leg has its own adjuster, so the sling shortens one corner at a time. That is how something like a transfer case or a cast manifold — heavy on one side, with lifting points nowhere near symmetrical — comes up level instead of swinging. The chain is manganese steel bearing the G80 mark, the hooks are alloy steel, and the welding is described as fully automatic. G80 stays a supplier grade marking and nothing more. No standard is named on this listing, so nothing here amounts to certification or a test result.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e150 cm legs:\u003c\/strong\u003e less chain between hoist hook and load where headroom is tight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour independent adjusters:\u003c\/strong\u003e each corner trimmed on its own to level an uneven load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrab hooks throughout:\u003c\/strong\u003e shorten on a link, nothing extra to thread or lose.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain and hook materials:\u003c\/strong\u003e manganese steel marked G80, with hooks in alloy steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWelded construction:\u003c\/strong\u003e the supplier's term for it is full-automatic welding.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain diameter:\u003c\/strong\u003e title 8 mm, description 5\/16 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain length:\u003c\/strong\u003e title 150 cm, description 5 ft\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIs that length one leg or the whole assembly:\u003c\/strong\u003e not stated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitle capacity:\u003c\/strong\u003e 5 Ton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDescription capacity:\u003c\/strong\u003e \"Maximum Working Capacity: 11,000 lbs\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeither figure states its basis:\u003c\/strong\u003e working versus breaking, one leg versus four, and included angle are all unspecified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaking strength:\u003c\/strong\u003e nowhere on the listing\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLegs:\u003c\/strong\u003e four, all carrying a grab hook and an adjuster\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain:\u003c\/strong\u003e manganese steel, marked G80 by the supplier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHooks:\u003c\/strong\u003e alloy steel, as given\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard, certification or test named:\u003c\/strong\u003e none\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eNon-negotiables for overhead lifting\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThis lifts. It does not recover. Putting a lifting sling on a snatch, a winch line or a tow applies shock loads it was never built for.\u003c\/li\u003e\n\u003cli\u003eLook over every link, hook and adjuster before each lift, and take the sling out of service if anything is nicked, cracked, bent, corroded, worn or stretched.\u003c\/li\u003e\n\u003cli\u003eRaise the load slowly. Shock loading is what breaks chain.\u003c\/li\u003e\n\u003cli\u003eNobody underneath, and no load travelling above a person.\u003c\/li\u003e\n\u003cli\u003eThe hook throat takes the load, never the tip. The supplier makes the same point in its own notes.\u003c\/li\u003e\n\u003cli\u003eKeep the chain straight — no knots, no twists, no wrapping it back through itself.\u003c\/li\u003e\n\u003cli\u003eBefore it goes into service, have someone competent check the assembly against the standard that applies, and repeat that check at the interval the standard requires.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMade for gearbox and engine work where the hoist sits low. Get the length basis and the capacity basis confirmed before you rig it.\u003c\/p\u003e\u003cimg title=\"V952-DGDLJZMGFHZYJ5B2UV0\" alt=\"V952-DGDLJZMGFHZYJ5B2UV0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-DGDLJZMGFHZYJ5B2UV0\"\u003e\u003cimg title=\"V952-DGDLJZMGFHZYJ5B2UV0\" alt=\"V952-DGDLJZMGFHZYJ5B2UV0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-DGDLJZMGFHZYJ5B2UV0\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54263818453319,"sku":"V952-DGDLJZMGFHZYJ5B2UV0","price":101.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883498803527.png?v=1783666011"},{"product_id":"2041-kg-electric-winch-12v-dc-atv-utv-winch-with-φ6-mm-x-12-m-steel-wire-rope-wireless-wired-remote-control-ip54-waterproof-roller-fairlead-mount-plate-for-towing-atv-utv-off-road","title":"2041 kg Electric Winch, 12V DC ATV\/UTV Winch with Φ6 mm x 12 m Steel Wire Rope, Wireless \u0026 Wired Remote Control, IP54 Waterproof, Roller Fairlead Mount Plate for Towing ATV UTV Off-Road","description":"\u003cp\u003eA quad bogged to the footpegs in a wet paddock is not something you push out. Even a light machine sits down hard once the wheels have dug in. A winch on the front rack, rated by the supplier at 2041 kg, turns that into a job you can do on your own — with a tree and a remote.\u003c\/p\u003e\u003ch2\u003e2.2 HP, geared down 128.2 to 1\u003c\/h2\u003e\u003cp\u003eA permanent magnet motor is the compact option, and on an ATV bumper compactness is the whole argument — there is no room for anything the size of a truck winch. The 2.2 HP output on its own would not move much. The 128.2:1 reduction is what converts it, trading motor speed for the torque that produces the supplier's rated pull. It is geared for short, hard recoveries: dragging a machine out of a rut, pulling a log clear of a track, winching a mower up onto a trailer.\u003c\/p\u003e\u003ch2\u003eTwelve metres of 6 mm steel\u003c\/h2\u003e\u003cp\u003eThe rope is multi-strand steel wire, 6 mm across and 12 m long, which the supplier describes as built for high tensile strength. Steel is the sensible choice on a machine that lives in scrub: it drags over gravel, through blackberry and across rock without the surface damage synthetic picks up. Twelve metres is not a lot of reach, so pick your anchor before you get stuck, and keep a tree protector and a short extension strap in the front bag. Feed the rope back onto the drum under light tension so it lays flat instead of birdcaging.\u003c\/p\u003e\u003ch2\u003eMounting, wiring and weather sealing\u003c\/h2\u003e\u003cp\u003eA fairlead and mounting bracket come in the box, and the wiring is colour-coded so a first-time install does not turn into a guessing game. The supplier notes that some machines will still need minor modification, so check the bolt spacing on your bumper or winch plate before you start. The control box is rated IP54, which covers splashes and mud rather than immersion — worth knowing if your riding involves creek crossings. The housing is aluminium with reinforced internals, and both a wireless and a wired remote are supplied.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePermanent magnet motor:\u003c\/strong\u003e 2.2 HP in a case small enough to sit on an ATV or UTV bumper.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e128.2:1 gear reduction:\u003c\/strong\u003e turns a modest motor output into usable pulling torque.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 mm steel wire rope:\u003c\/strong\u003e 12 m of multi-strand cable that tolerates being dragged through scrub.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless and wired remotes:\u003c\/strong\u003e long-range control, plus a corded handset for close work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour-coded wiring:\u003c\/strong\u003e takes most of the guesswork out of a first install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIP54-rated control box:\u003c\/strong\u003e made for splashes and mud rather than a still afternoon in a shed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated capacity (product title):\u003c\/strong\u003e 2041 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated pull (supplier feature text):\u003c\/strong\u003e 4500 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasis of rating:\u003c\/strong\u003e not stated by the supplier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 2.2 HP permanent magnet, 12 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGear reduction:\u003c\/strong\u003e 128.2:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope:\u003c\/strong\u003e 6 mm (0.24 in) multi-strand steel wire, 12 m (39.4 ft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing:\u003c\/strong\u003e IP54 control box\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e aluminium, with reinforced internal components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFairlead:\u003c\/strong\u003e supplied — the product title specifies a roller fairlead, while the supplier's feature text describes only a standard fairlead. Confirm which type is in the carton if the distinction matters to your build.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e wireless remote and wired remote\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWinch with steel rope fitted:\u003c\/strong\u003e wound on the drum ready to mount.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFairlead:\u003c\/strong\u003e see the note in the specifications about type.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting bracket:\u003c\/strong\u003e the title also refers to a mount plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemotes:\u003c\/strong\u003e one wireless, one wired.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore you fit it to your machine\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBoth capacity figures above are the supplier's, given in the supplier's units and left exactly as quoted. The supplier does not state the basis of the rating.\u003c\/li\u003e\n\u003cli\u003eNo standard, certification or test rating is named by the supplier, so none is stated here.\u003c\/li\u003e\n\u003cli\u003eThis is a pulling rating. The supplier gives no lifting or suspension rating, so the winch is not to be used to lift or hold a load overhead.\u003c\/li\u003e\n\u003cli\u003eThe supplier's own note is worth repeating: the mount suits many ATVs and UTVs, but some vehicles may require minor modification. Check your bumper or winch plate before ordering.\u003c\/li\u003e\n\u003cli\u003eSteel rope under tension stores energy. Lay a damper or a jacket over the line, keep everyone out of its arc, and inspect the cable for broken strands and kinks before each pull.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA sound bit of kit for farm work, trail riding and general property jobs, where getting unstuck on your own is usually the only option available.\u003c\/p\u003e\u003cimg title=\"V952-ZLQDXGSSJP45OJ5B5001V9\" alt=\"V952-ZLQDXGSSJP45OJ5B5001V9\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-ZLQDXGSSJP45OJ5B5001V9\"\u003e\u003cimg title=\"V952-ZLQDXGSSJP45OJ5B5001V9\" alt=\"V952-ZLQDXGSSJP45OJ5B5001V9\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-ZLQDXGSSJP45OJ5B5001V9\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54263819043143,"sku":"V952-ZLQDXGSSJP45OJ5B5001V9","price":190.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883499098439.png?v=1783666012"},{"product_id":"underhoist-support-stand-3-4-ton-capacity-under-hoist-jack-stand-lifting-from-52-8-to-76-in-self-locking-threaded-screw-bearing-mounted-spin-handle-pole-jack-support-vehicle-components","title":"Underhoist Support Stand, 3\/4 Ton Capacity Under Hoist Jack Stand, Lifting from 52.8 to 76 in, Self-Locking Threaded Screw, Bearing Mounted Spin Handle Pole Jack, Support Vehicle Components","description":"\u003cp\u003eDropping a gearbox is the easy part. Holding it, a radiator, or a length of exhaust exactly where it needs to sit while you line up bolts is the part that usually involves a trolley jack, a block of wood and a spare pair of hands you do not have. An underhoist stand does that job properly.\u003c\/p\u003e\u003ch2\u003eA screw thread that stays where you set it\u003c\/h2\u003e\u003cp\u003eHeight is set by a threaded screw rod, and the thread is self-locking — it will not wind itself back down when you take your hand off. That is the difference between a screw stand and a hydraulic jack, which relies on a seal holding pressure. The spin handle runs on a thrust bearing, so the last few millimetres of adjustment, where the load is already pressing hard on the tray, still turn by hand rather than by hammer. Adjustment covers 1340 to 1930 mm (52.8 to 76 in), which reaches from a low workshop floor to a vehicle up on a two-post hoist.\u003c\/p\u003e\u003ch2\u003eBase, tray and the way it holds\u003c\/h2\u003e\u003cp\u003eThe base is a 5 mm circular steel plate — thick enough not to dish under load and shaped to spread the weight across a concrete floor rather than concentrate it on three small feet. On top, a U-shaped tray with rubber padding cradles whatever you are supporting: the rubber grips a painted sump or an alloy gearbox case without marking it, and the U shape stops a round component rolling off sideways. The column is tubular steel, which the supplier describes as resisting deformation and twisting under load.\u003c\/p\u003e\u003ch2\u003eThe jobs it earns its keep on\u003c\/h2\u003e\u003cp\u003eMost of its life will be spent under a car that is already up on a hoist, taking the weight of something being unbolted. Gearboxes and transfer cases are the obvious ones. Beyond that: holding a tailshaft while the centre bearing comes out, steadying a radiator during a hose change, supporting an exhaust section or a catalytic converter so the remaining bolts are not carrying the lot, or nudging a CV shaft up into line. The supplier is explicit that this is partial support for positioning components.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-locking screw thread:\u003c\/strong\u003e holds its height without a hydraulic seal to fail or bleed down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThrust-bearing spin handle:\u003c\/strong\u003e still turns by hand when the tray is already loaded up.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1340-1930 mm range:\u003c\/strong\u003e covers work on the floor and work under a raised hoist.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 mm steel base plate:\u003c\/strong\u003e spreads the load across the floor instead of point-loading it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber-padded U-tray:\u003c\/strong\u003e grips a component without marking it, and stops round parts rolling off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTubular steel column:\u003c\/strong\u003e described by the supplier as resisting deformation and twisting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated capacity (product title):\u003c\/strong\u003e 3\/4 Ton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated capacity (supplier feature text):\u003c\/strong\u003e 1653.5 lbs \/ 0.75 tons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasis of rating:\u003c\/strong\u003e the supplier's figure is for a single stand, and the supplier states that at least two stands are required in use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight range:\u003c\/strong\u003e 52.8 in - 76.0 in \/ 1340 - 1930 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase:\u003c\/strong\u003e circular steel plate, 0.2 in \/ 5 mm thick\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSaddle:\u003c\/strong\u003e U-shaped tray with rubber padding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColumn:\u003c\/strong\u003e tubular steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment:\u003c\/strong\u003e self-locking threaded screw rod with bearing-mounted spin handle and rubber grip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied as:\u003c\/strong\u003e one stand — this listing has a single variant and no multi-pack option\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore it goes under a vehicle\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis is not a jack and not a vehicle stand.\u003c\/strong\u003e It supports a component while you position or remove it. Raise the vehicle with a rated jack or a hoist and lower it onto rated vehicle stands before any part of you goes underneath. A lifting device on its own is never what you trust with your body.\u003c\/li\u003e\n\u003cli\u003eThe capacity is quoted above exactly as the supplier gives it, for a single stand. It has not been converted, doubled or combined. The supplier states that at least two stands are required in use, and this listing supplies one.\u003c\/li\u003e\n\u003cli\u003eThe supplier's feature text also says the stand \"can support most small cars and similar vehicles\", which sits awkwardly beside its own description of the product as partial support for positioning components. Treat it as component support only.\u003c\/li\u003e\n\u003cli\u003eNo standard, certification or test rating is named by the supplier for this stand, so none is stated here.\u003c\/li\u003e\n\u003cli\u003eUse it on level concrete, keep the load centred in the U-tray, and take the load off it as soon as the job allows rather than leaving something parked on it.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA useful addition to a home workshop that has a hoist or a pit, and a standard bit of kit anywhere gearboxes and exhausts come out regularly.\u003c\/p\u003e\u003cimg title=\"V952-QCSJJAQZJYXDZXD1EV0\" alt=\"V952-QCSJJAQZJYXDZXD1EV0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-QCSJJAQZJYXDZXD1EV0\"\u003e\u003cimg title=\"V952-QCSJJAQZJYXDZXD1EV0\" alt=\"V952-QCSJJAQZJYXDZXD1EV0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-QCSJJAQZJYXDZXD1EV0\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54263819370823,"sku":"V952-QCSJJAQZJYXDZXD1EV0","price":94.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883499458887.png?v=1783666011"},{"product_id":"3-in-1-electric-hoist-winch-500-kg-capacity-1500w-portable-electric-power-winch-7-6-m-lifting-height-5-m-min-with-manual-wired-wireless-remote-control-for-factory-warehouss-garage","title":"3-in-1 Electric Hoist Winch, 500 kg Capacity, 1500W Portable Electric Power Winch, 7.6 m Lifting Height, 5 m\/min with Manual, Wired \u0026 Wireless Remote Control for Factory, Warehouss, Garage","description":"\u003cp\u003eGetting an engine block or a loaded pallet up to head height usually takes two people and a fair chance of dropping something. A 1500 W electric hoist does that part on its own, and this one gives you three separate ways to run it.\u003c\/p\u003e\u003ch2\u003eThree ways to drive it\u003c\/h2\u003e\u003cp\u003eButtons on the hoist body suit quick work beside the unit. The supplier quotes a wired pendant lead of 27 ft, roughly 8 m, enough to run a lift from across a bay while watching the load rather than the drum. The wireless handset is quoted at 200 ft, about 60 m, which earns its money when the hoist sits overhead and the only sensible place to stand is outside whatever is swinging.\u003c\/p\u003e\u003ch2\u003eBrakes that hold when the power drops out\u003c\/h2\u003e\u003cp\u003eTwo braking systems work together: an electronic brake stops the motor, a mechanical brake holds the load once stopped. A limit switch cuts power at the top of travel so the rope cannot be wound into the housing. The supplier also states the motor stops if supply is lost, so a blackout mid-lift does not become a drop. The hook has a 360° latch that keeps a sling eye from jumping clear as a load rotates.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFan-cooled 1500 W motor:\u003c\/strong\u003e bigger brushes and forced air suit repeat cycles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGalvanised wire rope:\u003c\/strong\u003e resists the rust that seizes a drum in a damp shed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnhurried 5 m\/min:\u003c\/strong\u003e slow travel lets you place a load, not chase it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVertical or horizontal:\u003c\/strong\u003e lifts up a bay or drags across a slab.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated capacity:\u003c\/strong\u003e 500 kg (supplier also states 1,100 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1500 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifting height:\u003c\/strong\u003e 7.6 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifting speed:\u003c\/strong\u003e 5 m\/min, no load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired pendant lead:\u003c\/strong\u003e 27 ft, about 8 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless range:\u003c\/strong\u003e 200 ft, about 60 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope:\u003c\/strong\u003e galvanised steel wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBraking:\u003c\/strong\u003e electronic and mechanical, with top limit switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook:\u003c\/strong\u003e 360° with safety latch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore you use it\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e500 kg is one supplier figure with no stated basis, single line or with a pulley block. Work to the unit's rating plate.\u003c\/li\u003e\n\u003cli\u003eThe mount carries load plus hoist. No fixings, structure or standard are specified.\u003c\/li\u003e\n\u003cli\u003eA hoist lifts; it does not support. Never go under a suspended load.\u003c\/li\u003e\n\u003cli\u003eVoltage and plug type are not stated. Confirm before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSensible where the same heavy things go up and down often.\u003c\/p\u003e\u003cimg title=\"V952-SGGKBXSDDHLSXE8ZG001V3\" alt=\"V952-SGGKBXSDDHLSXE8ZG001V3\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-SGGKBXSDDHLSXE8ZG001V3\"\u003e\u003cimg title=\"V952-SGGKBXSDDHLSXE8ZG001V3\" alt=\"V952-SGGKBXSDDHLSXE8ZG001V3\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-SGGKBXSDDHLSXE8ZG001V3\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54263819534663,"sku":"V952-SGGKBXSDDHLSXE8ZG001V3","price":188.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883499622727.png?v=1783666013"},{"product_id":"2-in-1-electric-hoist-winch-500-kg-capacity-1500w-portable-power-winch-crane-7-6-m-lifting-height-5-m-min-with-manual-and-wired-remote-control-for-factory-warehouss-garage","title":"2-in-1 Electric Hoist Winch, 500 kg Capacity, 1500W Portable Power Winch Crane, 7.6 m Lifting Height, 5 m\/min with Manual and Wired Remote Control for Factory, Warehouss, Garage","description":"\u003cp\u003eA one-person workshop hits a wall the moment something weighs more than you can shoulder. Bolt a 1500 W hoist to a beam and the lifting stops being the hard part. Control on this model is corded throughout.\u003c\/p\u003e\u003ch2\u003eA pendant with nothing to go flat\u003c\/h2\u003e\u003cp\u003eEvery control runs down a cable here. The supplier quotes the pendant lead at 22.6 ft, near enough to 6.9 m, so you can step back from the hook and still reach the buttons. A cord is less elegant than radio, but nothing has to pair, nothing goes flat mid-lift, and no other handset on site can talk to your hoist by accident. To stand further back than about seven metres, look at the wireless model in this range.\u003c\/p\u003e\u003ch2\u003eSlow travel is the point\u003c\/h2\u003e\u003cp\u003eLift height is quoted at 7.6 m, speed at 5 m\/min with nothing on the hook. Five metres a minute sounds unhurried until you are the one guiding a gearbox down onto a stand, where a quick drum just means less time to correct. Behind it sits a 1500 W motor with forced-fan cooling and enlarged carbon brushes. Pulling heat from the windings between pulls is what makes a run of lifts practical rather than one and a long wait.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwin braking:\u003c\/strong\u003e one brake arrests the motor, the other holds the load after.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTop limit switch:\u003c\/strong\u003e ends travel before the rope reaches the housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower-loss cut-out:\u003c\/strong\u003e the supplier states the motor stops if supply drops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatched 360° hook:\u003c\/strong\u003e the throat stays shut while a load turns.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated capacity:\u003c\/strong\u003e 500 kg (supplier also states 1,100 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1500 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifting height:\u003c\/strong\u003e 7.6 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifting speed:\u003c\/strong\u003e 5 m\/min, no load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e body buttons plus wired pendant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePendant lead:\u003c\/strong\u003e 22.6 ft, about 6.9 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope:\u003c\/strong\u003e galvanised steel wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook:\u003c\/strong\u003e 360° with safety latch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore it takes a load\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe 500 kg rating is published as one number with no stated basis. Treat the unit's rating plate as the authority.\u003c\/li\u003e\n\u003cli\u003eThe mounting point carries load plus hoist, and no hardware or structure is specified.\u003c\/li\u003e\n\u003cli\u003eA hoist lifts; it holds nothing up for you. Never lift over anyone.\u003c\/li\u003e\n\u003cli\u003eVoltage and plug type are absent. Check before you order.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA straightforward pick if staying within a cable's reach suits the work.\u003c\/p\u003e\u003cimg title=\"V952-CGGGKBXSDDHL73MQ6001V3\" alt=\"V952-CGGGKBXSDDHL73MQ6001V3\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-CGGGKBXSDDHL73MQ6001V3\"\u003e\u003cimg title=\"V952-CGGGKBXSDDHL73MQ6001V3\" alt=\"V952-CGGGKBXSDDHL73MQ6001V3\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-CGGGKBXSDDHL73MQ6001V3\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54263819698503,"sku":"V952-CGGGKBXSDDHL73MQ6001V3","price":171.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883499721031.png?v=1783668616"},{"product_id":"2-in-1-electric-hoist-winch-500-kg-capacity-1500w-portable-power-winch-crane-7-6-m-lifting-height-5-m-min-with-manual-and-wireless-remote-control-for-factory-warehouss-garage","title":"2-in-1 Electric Hoist Winch, 500 kg Capacity, 1500W Portable Power Winch Crane, 7.6 m Lifting Height, 5 m\/min with Manual and Wireless Remote Control for Factory, Warehouss, Garage","description":"\u003cp\u003eOverhead lifting has an awkward habit of putting the operator directly beneath the thing being lifted. This 1500 W hoist ships with a wireless handset quoted at 200 ft, so the buttons go wherever you actually want to be standing.\u003c\/p\u003e\u003ch2\u003eSixty metres of standing room\u003c\/h2\u003e\u003cp\u003eThe handset is rated by the supplier to 200 ft, roughly 60 m, and that distance changes how a lift gets organised. Rather than craning your neck under the hook, you can stand where the landing point is genuinely visible, usually somewhere a pendant cable would never reach. Buttons on the body remain for setting up. Vertical lifts and horizontal pulls both work, so the hoist that raises a block can drag a chassis across a slab.\u003c\/p\u003e\u003ch2\u003eWhat keeps it turning up to work\u003c\/h2\u003e\u003cp\u003eA 1500 W motor with forced-fan cooling sits behind the drum. Heat is what finishes a hoist motor on repeat cycles, and moving air across the windings between pulls is the cheap, effective answer; enlarged brushes buy more wear before service. The rope is galvanised steel wire, which fights the surface rust that seizes a drum in a coastal shed and resists the twist that leaves kinks in cheaper cable.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless plus body buttons:\u003c\/strong\u003e no pendant cable to snag or trail through a work area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo brakes:\u003c\/strong\u003e one stops the motor, the other holds the load afterwards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic top limit:\u003c\/strong\u003e travel ends before the rope reaches the housing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStops on power loss:\u003c\/strong\u003e the supplier states the motor cuts out if supply drops.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated capacity:\u003c\/strong\u003e 500 kg (supplier also states 1,100 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor:\u003c\/strong\u003e 1500 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifting height:\u003c\/strong\u003e 7.6 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifting speed:\u003c\/strong\u003e 5 m\/min, no load\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e body buttons plus wireless handset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless range:\u003c\/strong\u003e 200 ft, about 60 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope:\u003c\/strong\u003e galvanised steel wire\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook:\u003c\/strong\u003e 360° with safety latch\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCheck these first\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e500 kg is published as one figure with no stated basis, single line or through a pulley block. Go by the rating plate on the unit itself.\u003c\/li\u003e\n\u003cli\u003eThe structure you fix it to carries the load and the hoist. Mounting hardware is not specified.\u003c\/li\u003e\n\u003cli\u003eLifting equipment is not support equipment. Nobody goes under a raised load.\u003c\/li\u003e\n\u003cli\u003eVoltage and plug type are not given. Confirm before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWell matched to work where the hoist lives overhead.\u003c\/p\u003e\u003cimg title=\"V952-CGGGKBXSDDHL4I4OH001V3\" alt=\"V952-CGGGKBXSDDHL4I4OH001V3\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-CGGGKBXSDDHL4I4OH001V3\"\u003e\u003cimg title=\"V952-CGGGKBXSDDHL4I4OH001V3\" alt=\"V952-CGGGKBXSDDHL4I4OH001V3\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-CGGGKBXSDDHL4I4OH001V3\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54263820517703,"sku":"V952-CGGGKBXSDDHL4I4OH001V3","price":162.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883499884871.png?v=1783668616"},{"product_id":"rv-electric-tongue-jack-cover-heavy-duty-waterproof-design-with-chain-hooks-protective-black-cover-for-outdoor-camper-accessories","title":"RV Electric Tongue Jack Cover – Heavy-Duty Waterproof Design with Chain Hooks, Protective Black Cover for Outdoor Camper Accessories","description":"\u003cp\u003eAn electric tongue jack spends its whole life pointing straight up at the weather, and the motor housing sits right at the top of it. Left uncovered through a wet season, water works past the seams and the switch gear is generally what fails first. This cover goes over the entire head.\u003c\/p\u003e\u003ch2\u003ePVC outside, Oxford cloth behind it\u003c\/h2\u003e\u003cp\u003eThe supplier describes the cover as heavy-duty PVC with Oxford cloth, which is a sensible pairing for anything living outdoors on a drawbar. PVC gives the outer face something that sheds water instead of soaking it up; the woven Oxford backing carries the shape and takes the abrasion of being dragged on and off with cold hands. Colour is black. What the supplier does not publish is a rated figure of any kind, so those material descriptions are exactly that, descriptions, rather than measured performance.\u003c\/p\u003e\u003ch2\u003eA drawstring that locks, and two hooks below it\u003c\/h2\u003e\u003cp\u003eThe hem carries an adjustable locking drawstring, which matters more on a trailer than it sounds. A cover that merely slips over the top will lift at highway speed and be gone by the first fuel stop; cinched and locked, it stays where you put it. Beneath the body sit two hooks, meant for the trailer chains. Hanging the chains there rather than leaving them draped over the drawbar keeps them out of the road grime and stops the steady chime of steel against steel behind you.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCovers the jack head:\u003c\/strong\u003e goes over the top of an electric tongue jack, motor housing included.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-duty PVC with Oxford cloth:\u003c\/strong\u003e the materials as described by the supplier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable locking drawstring:\u003c\/strong\u003e cinches down so the cover stays put at speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo chain hooks:\u003c\/strong\u003e keeps trailer chains off the ground and quiet.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlack finish:\u003c\/strong\u003e the only colour the supplier lists.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStated size:\u003c\/strong\u003e 14”H x 5”W x 10”D, described by the supplier as a universal size\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e heavy-duty PVC and Oxford cloth\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClosure:\u003c\/strong\u003e adjustable locking drawstring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHooks:\u003c\/strong\u003e two, for trailer chains\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater ingress or UV rating:\u003c\/strong\u003e no figure published\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible jack makes or models:\u003c\/strong\u003e none named by the supplier\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat is not rated here\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMeasure your jack. The supplier calls the size universal and names no jack make or model, so nothing here confirms it will fit a particular unit.\u003c\/li\u003e\n\u003cli\u003eThe dimensions above are quoted in the units the supplier used and have not been converted.\u003c\/li\u003e\n\u003cli\u003eThe supplier calls the cover waterproof and UV-resistant. Neither comes with a rating or a test figure, so both are its description rather than a specification.\u003c\/li\u003e\n\u003cli\u003eA cover keeps weather off. It is no substitute for attending to a jack that is already taking in water.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAn inexpensive bit of kit that keeps the costly part of a jack out of the rain and gives the chains somewhere sensible to live.\u003c\/p\u003e\u003ch2\u003eReturns, Refunds, and Replacements\u003c\/h2\u003e\u003cp\u003eProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.\u003c\/p\u003e\u003ch2\u003eDelivery Timeframe\u003c\/h2\u003e\u003cp\u003ePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:\u003c\/p\u003e\u003cp\u003eFor customers in Victoria, approximately 7-10 working days;\u003cbr\u003eFor customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;\u003cbr\u003eFor customers in WA, NT, and TAS, approximately 9-12 working days.\u003c\/p\u003e\u003cimg title=\"V1259-DP01-F-50\" alt=\"V1259-DP01-F-50\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1259-DP01-F-50\"\u003e\u003cimg title=\"V1259-DP01-F-50\" alt=\"V1259-DP01-F-50\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1259-DP01-F-50\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54264394809671,"sku":"V1259-DP01-F-50","price":31.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883570598215.png?v=1783677739"},{"product_id":"12-pcs-hydraulic-jack-oil-plug-fit-hole-of-5-16-flat-head-rubber-floor-accessories-replacement-parts-horizontal-bung-universal-rubber-filler-bung-for-oil-reservoir-filler-hole","title":"12 Pcs Hydraulic Jack Oil Plug Fit Hole of 5\/16\", Flat-Head Rubber Floor Accessories Replacement Parts Horizontal Bung Universal Rubber Filler Bung for Oil Reservoir Filler Hole","description":"\u003cp\u003eThe rubber bung in the top of a trolley jack is a five-cent part that ruins an afternoon. It perishes, works loose, and then the jack weeps oil across the shed floor every time the handle goes down. This is a twelve-pack of flat-head replacement bungs, sized for a 5\/16 in filler hole.\u003c\/p\u003e\n\u003ch2\u003eSized to the hole, not to a brand\u003c\/h2\u003e\n\u003cp\u003eOne measurement decides whether these work, and the supplier publishes it: the plug suits a 5\/16 in filler hole. That covers a lot of trolley jacks and bottle jacks, but not all of them, and no specific jack brands or models are named anywhere in the supplier's data. Pull the old bung out, measure across the opening, and buy on that figure rather than on the badge cast into the jack. A plug that is close but not right will seat, then push itself back out under pressure.\u003c\/p\u003e\n\u003ch2\u003eRubber that you can pull and refit\u003c\/h2\u003e\n\u003cp\u003eThe bung is moulded rubber with a flat head that sits level with the reservoir boss instead of standing proud where it can catch. Because it is rubber rather than a one-shot press-in fitting, the same plug comes out for a top-up and goes back in again. Twelve in the pack means spares live in the toolbox rather than being ordered one at a time.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwelve per pack:\u003c\/strong\u003e enough to service several jacks and still keep spares on the shelf.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlat head:\u003c\/strong\u003e sits flush in the filler boss rather than proud of it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReusable rubber:\u003c\/strong\u003e can be removed for a top-up and pressed back in, unlike a single-use fitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAftermarket replacement:\u003c\/strong\u003e supplied as an alternative part, not as a jack manufacturer's own item.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits filler hole:\u003c\/strong\u003e 5\/16 in — the only size figure the supplier publishes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead style:\u003c\/strong\u003e flat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall length, shank diameter and rubber hardness:\u003c\/strong\u003e not published\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible jack brands and models:\u003c\/strong\u003e none named by the supplier\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore you order\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMeasure your jack's filler hole. This plug is listed for 5\/16 in only, and no jack makes or models are specified.\u003c\/li\u003e\n\u003cli\u003eA jack leaking from the ram or the base is not fixed by a new bung. Have it inspected before it goes back under a vehicle.\u003c\/li\u003e\n\u003cli\u003eA jack lifts a vehicle; stands hold it. Never work under a car supported only by a jack.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf the hole measures 5\/16 in, this is the cheap fix that saves a jack from the tip.\u003c\/p\u003e\n\u003ch2\u003eReturns, Refunds, and Replacements\u003c\/h2\u003e\n\u003cp\u003eProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.\u003c\/p\u003e\n\u003ch2\u003eDelivery Timeframe\u003c\/h2\u003e\n\u003cp\u003ePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:\u003c\/p\u003e\n\u003cp\u003eFor customers in Victoria, approximately 7-10 working days;\nFor customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;\nFor customers in WA, NT, and TAS, approximately 9-12 working days.\u003c\/p\u003e\u003cimg title=\"V1258-DP02-A-2396\" alt=\"V1258-DP02-A-2396\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1258-DP02-A-2396\"\u003e\u003cimg title=\"V1258-DP02-A-2396\" alt=\"V1258-DP02-A-2396\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1258-DP02-A-2396\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54264429707591,"sku":"V1258-DP02-A-2396","price":24.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883584950599.png?v=1783684165"},{"product_id":"4-pcs-sway-bracket-jacket-bulk-compatible-with-e2-hitch-sway-control-brackets-6k-8k-10k-12k-14k-weight-distribution-hitch-parts-bar-for-rv-noise-reduction-eliminate-creaking-wear-2-x-0-5-inch","title":"4 Pcs Sway Bracket Jacket Bulk Compatible with E2 Hitch Sway Control Brackets 6k 8k 10k 12k 14k Weight Distribution Hitch Parts Bar for RV Noise Reduction Eliminate Creaking Wear 2 x 0.5 Inch","description":"\u003cp\u003eThe creaking from a weight-distribution hitch is metal on metal: the spring bar crossbar working against the sway control bracket every time the van moves behind you. These four moulded plastic sleeves slide over that contact point so the two surfaces are no longer rubbing directly against one another.\u003c\/p\u003e\u003ch2\u003eA wear sleeve, and nothing more than that\u003c\/h2\u003e\u003cp\u003eIt is worth being blunt about what these are, because they sit on towing hardware. Each piece is a plastic jacket that isolates one metal-on-metal contact point on a hitch you already own. It carries no load, it is not a structural or rated component, and it plays no part in how the hitch controls sway. The supplier's copy talks about stability and pressure resistance. None of that is carried here, because a plastic sleeve does not make a towing system more stable. What it does is quieten a noise and slow the wear at one rubbing point.\u003c\/p\u003e\u003ch2\u003eThe brackets the supplier names\u003c\/h2\u003e\u003cp\u003eCompatibility is stated as E2 hitch sway control brackets, in the 6k, 8k, 10k, 12k and 14k designations. Those figures are bracket model names used by that hitch. They are not a rating of these sleeves and not a towing capacity of any kind. No other brand and no other model is named by the supplier, so none is claimed here. Each jacket is 2 inches wide and 1\/2 inch deep, and a size diagram is included so those dimensions can be checked against the bracket in front of you. They slide on by hand, without tools.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour jackets per set:\u003c\/strong\u003e supplied as a set of four, per the supplier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNamed fitment only:\u003c\/strong\u003e E2 hitch sway control brackets as listed, and nothing beyond that.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlides on by hand:\u003c\/strong\u003e no tools, no drilling, no modification to the bracket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 inch by 1\/2 inch section:\u003c\/strong\u003e published dimensions, with a size diagram to check against.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMoulded plastic:\u003c\/strong\u003e a sacrificial wear face between two steel parts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 4 jackets\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e plastic; the supplier describes it as high-strength plastic and names no grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 2 inches wide, 1\/2 inch deep\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStated compatibility:\u003c\/strong\u003e E2 hitch sway control brackets, 6k \/ 8k \/ 10k \/ 12k \/ 14k\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e none. This is not a rated component and no load figure is published or implied\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded:\u003c\/strong\u003e size diagram\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTowing hardware must be matched and rated by the hitch maker\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSway control is what keeps a caravan tracking behind the tow vehicle at highway speed. Nothing in this pack contributes to that. These sleeves do not improve sway control, towing stability or towing safety, and they must never be used in place of a rated hitch part, a worn bracket, or a proper service.\u003c\/li\u003e\n\u003cli\u003eCheck the sleeves against your own brackets using the supplied size diagram, and confirm with the hitch manufacturer that fitting a sleeve at that contact point is acceptable on your equipment. Some sway control designs depend on friction at that surface. Matching and rating towing hardware is the hitch manufacturer's job; fitting it correctly is the owner's.\u003c\/li\u003e\n\u003cli\u003eInspect the hitch, the spring bars and the brackets before every trip. Any jacket that has worn through, split or moved out of position should be removed and replaced.\u003c\/li\u003e\n\u003cli\u003eThis is not recovery equipment. It must never be used to snatch, tow, winch or restrain a load.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFour sleeves, straight onto the brackets you already run, to quieten one noisy contact point.\u003c\/p\u003e\u003ch2\u003eReturns, Refunds, and Replacements\u003c\/h2\u003e\u003cp\u003eProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.\u003c\/p\u003e\u003ch2\u003eDelivery Timeframe\u003c\/h2\u003e\u003cp\u003ePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:\u003c\/p\u003e\u003cp\u003eFor customers in Victoria, approximately 7-10 working days;\u003cbr\u003eFor customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;\u003cbr\u003eFor customers in WA, NT, and TAS, approximately 9-12 working days.\u003c\/p\u003e\u003cimg title=\"V1258-DP02-C-3049\" alt=\"V1258-DP02-C-3049\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1258-DP02-C-3049\"\u003e\u003cimg title=\"V1258-DP02-C-3049\" alt=\"V1258-DP02-C-3049\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1258-DP02-C-3049\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54264472142151,"sku":"V1258-DP02-C-3049","price":36.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883600449863.png?v=1783686190"},{"product_id":"1-2-scissor-jack-adapter-scissor-jack-drill-adapter-for-1-2-inch-drive-socket-or-13-16-inch-lug-wrench-drive-impact-wrench-automotive-sturdy-power-jacks-connector","title":"1\/2\" Scissor Jack Adapter, Scissor Jack Drill Adapter for 1\/2 Inch Drive Socket or 13\/16 Inch Lug Wrench, Drive Impact Wrench Automotive Sturdy Power Jacks Connector","description":"\u003cp\u003eA scissor jack is turned by a screw, and that screw takes a socket. This is the coupler that sits between the screw and a drive tool. It is a simple piece of steel with a specific job, and the sensible way to buy it is knowing exactly what the supplier does and does not state about it.\u003c\/p\u003e\u003ch2\u003eWhat the steel actually is\u003c\/h2\u003e\u003cp\u003eChrome-vanadium is the material given, which is the usual choice for sockets and drive tools because it takes torsional loading without shearing. The body measures 0.8 x 2.0 inches, roughly 20 x 51 mm, and weighs 0.3 lb, about 136 g. The bore is given as 0.5 inch and the outside as 0.8 inch. The supplier lists it as suiting 1\/2 inch drive tools, ratchets and socket adaptors, and 13\/16 inch lug wrenches. Note that no torque rating and no load rating appear anywhere in the data, so there is no published figure for what this adapter will take.\u003c\/p\u003e\u003ch2\u003eA jack lifts a vehicle. It does not hold one up\u003c\/h2\u003e\u003cp\u003eThis is the part that matters more than any specification. A scissor jack is a lifting device, and nothing more than that. Once a vehicle is at height, axle stands rated for the load go under the manufacturer's designated support points and carry the weight before anyone puts a hand, an arm or a head under the car. The jack stays in place as a backup and is never relied on. Level, firm ground, the handbrake on, the vehicle in gear or in park, and the diagonally opposite wheel chocked, are the conditions before the jack is touched at all.\u003c\/p\u003e\u003ch2\u003eRead this before a drill goes anywhere near a jack\u003c\/h2\u003e\u003cp\u003eDriving a scissor jack with a power tool removes the feedback a handle gives you. The screw has a finite travel and a jack run to the end of it can strip the thread, bind, or tip the vehicle off the jack head. An impact wrench makes that far worse: it delivers hammer blows the screw was never designed to absorb, and it will reach the travel limit before you have registered anything is wrong. Use a low-speed drill at most, keep a hand on the vehicle to watch what is moving, and stop well short of the jack's stated travel in both directions.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChrome-vanadium steel:\u003c\/strong\u003e the material the supplier names for the body.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.5 inch bore:\u003c\/strong\u003e the internal dimension published for the drive end.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0.8 inch outside:\u003c\/strong\u003e the external dimension, listed as suiting a 13\/16 inch lug wrench.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e136 g:\u003c\/strong\u003e light enough to live in a boot kit rather than a workshop drawer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e51 mm long:\u003c\/strong\u003e a short coupler, not an extension bar.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e chrome-vanadium steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall size:\u003c\/strong\u003e 0.8 x 2.0 inches (about 20 x 51 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.3 lb (about 136 g)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner diameter:\u003c\/strong\u003e 0.5 inch, described by the supplier as suiting 1\/2 inch drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter diameter:\u003c\/strong\u003e 0.8 inch, described as suiting a 13\/16 inch lug wrench\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive profile:\u003c\/strong\u003e the supplier gives diameters only and does not state whether either end is a square drive or a hex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque rating:\u003c\/strong\u003e not published\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating:\u003c\/strong\u003e not published\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJack makes or models it is confirmed to suit:\u003c\/strong\u003e none named\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSafety rules that are not optional\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNever work under a vehicle supported by a jack. Rated axle stands take the load at the manufacturer's support points first, every time.\u003c\/li\u003e\n\u003cli\u003eNever use an impact wrench on a scissor jack. The screw is not built for impact loading and the travel limit arrives faster than you can react.\u003c\/li\u003e\n\u003cli\u003eOnly lift on level, firm ground. Soft gravel, a sloped driveway or hot bitumen can let a jack lean or sink under load.\u003c\/li\u003e\n\u003cli\u003eStop well before the top and the bottom of the jack's travel. Running a screw jack against its stops under power is how threads are stripped and jacks are toppled.\u003c\/li\u003e\n\u003cli\u003eNo torque or load figure is published for this adapter. Do not assume it will carry whatever your tool can deliver.\u003c\/li\u003e\n\u003cli\u003eCheck the fit against your own jack before relying on it. No jack make or model is named anywhere in the supplier's data.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA small steel coupler, described here as exactly what it is, with the conditions for using one set out plainly.\u003c\/p\u003e\u003ch2\u003eReturns, Refunds, and Replacements\u003c\/h2\u003e\u003cp\u003eProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.\u003c\/p\u003e\u003ch2\u003eDelivery Timeframe\u003c\/h2\u003e\u003cp\u003ePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:\u003c\/p\u003e\u003cp\u003eFor customers in Victoria, approximately 7-10 working days;\u003cbr\u003eFor customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;\u003cbr\u003eFor customers in WA, NT, and TAS, approximately 9-12 working days.\u003c\/p\u003e\u003cimg title=\"V1258-DP02-B-2635\" alt=\"V1258-DP02-B-2635\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1258-DP02-B-2635\"\u003e\u003cimg title=\"V1258-DP02-B-2635\" alt=\"V1258-DP02-B-2635\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1258-DP02-B-2635\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54264747524423,"sku":"V1258-DP02-B-2635","price":22.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883691053383.png?v=1783722365"},{"product_id":"car-scissor-lift-jack-crank-handle-non-slip-scissor-jack-handle-efficient-auto-repair-tool-labor-saving-steel-tire-wheel-lug-wrench-for-trucks-vans-trailers-car-accessories-short-lever","title":"Car Scissor Lift Jack Crank Handle, Non-Slip Scissor Jack Handle Efficient Auto Repair Tool, Labor-Saving Steel Tire Wheel Lug Wrench for Trucks Vans Trailers, Car Accessories (Short Lever)","description":"\u003cp\u003eThe folding rod that comes with a factory scissor jack is usually too short to swing properly and too whippy to be quick, which is how a wheel change on a wet verge turns into twenty minutes of work. This is an aftermarket crank handle in the short lever size.\u003c\/p\u003e\u003ch2\u003eThe two sizes, and which one this is\u003c\/h2\u003e\u003cp\u003eThe supplier makes the handle in two lengths and only one of them is carried here. The long version is given as 14.1 x 7.9 inches with a maximum opening span of 21.7 inches. The short version, which is the one named in the title, is given as 10.6 x 5.9 inches — roughly 27 x 15 cm — with a maximum opening span of 16.5 inches, about 42 cm. There is no size to select at checkout. Those spans are the numbers to compare against the wind-up spindle on your own jack, because the supplier names no jack brand or model at all.\u003c\/p\u003e\u003ch2\u003eSteel shaft, a hooked end and a 95 mm grip\u003c\/h2\u003e\u003cp\u003eMaterial is given only as high-strength metal, described as resisting bending and cracking and finished to be waterproof and rustproof. No grade, no alloy and no coating specification is published. The working end is a hook: it drops over the eye on the jack spindle and the handle turns it. At the other end is a 3.74 inch grip, about 9.5 cm of plastic, and that length is what keeps your hands out of the wheel arch while winding. No load rating, no torque figure and no capacity of any kind appears in the supplier's text, and none has been estimated here.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShort lever version:\u003c\/strong\u003e 10.6 x 5.9 inches, 16.5 inch maximum opening span, per the supplier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHooked drive end:\u003c\/strong\u003e engages a scissor jack spindle eye, no adaptor involved.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.74 inch moulded grip:\u003c\/strong\u003e keeps both hands clear of the wheel while winding.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal shaft:\u003c\/strong\u003e described by the supplier as high-strength, waterproof and rustproof.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLives in the boot:\u003c\/strong\u003e compact enough to sit with the spare rather than take up a toolbox.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersion stocked:\u003c\/strong\u003e short lever, per the product title\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize:\u003c\/strong\u003e 10.6 x 5.9 inches (about 27 x 15 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum opening span:\u003c\/strong\u003e 16.5 inches (about 42 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip length:\u003c\/strong\u003e 3.74 inches (about 9.5 cm), plastic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft material:\u003c\/strong\u003e stated only as high-strength metal; no grade published\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive type:\u003c\/strong\u003e hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad rating, torque figure or jack capacity:\u003c\/strong\u003e none published\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible jack makes or models:\u003c\/strong\u003e none named\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore you lift a vehicle with this\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA jack lifts a car; it never supports one.\u003c\/strong\u003e Rated axle stands must be under the vehicle and carrying its weight before any part of a person goes underneath. This applies no matter how briefly you expect to be there.\u003c\/li\u003e\n\u003cli\u003eLevel, firm ground only. Handbrake on, vehicle in gear or in park, and the wheels at the opposite end chocked. A scissor jack on soft or sloping ground can walk out from under the sill.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNever drive a scissor jack with an impact wrench or rattle gun.\u003c\/strong\u003e The speed and shock loading are not what the screw mechanism is built for and the jack can fail without warning.\u003c\/li\u003e\n\u003cli\u003eNo load rating is published for this handle, so it cannot be matched from the data to any particular jack's capacity. Work within the rating of the jack itself.\u003c\/li\u003e\n\u003cli\u003eThe title also describes the item as a lug wrench. The supplier's description covers only the crank handle function, so treat it as a jack handle and check the photographs before relying on it for wheel nuts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOne handle, one published size, and a lifting job that still needs stands under it.\u003c\/p\u003e\u003ch2\u003eReturns, Refunds, and Replacements\u003c\/h2\u003e\u003cp\u003eProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.\u003c\/p\u003e\u003ch2\u003eDelivery Timeframe\u003c\/h2\u003e\u003cp\u003ePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:\u003c\/p\u003e\u003cp\u003eFor customers in Victoria, approximately 7-10 working days;\u003cbr\u003eFor customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;\u003cbr\u003eFor customers in WA, NT, and TAS, approximately 9-12 working days.\u003c\/p\u003e\u003cimg title=\"V1258-DP02-A-1771\" alt=\"V1258-DP02-A-1771\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1258-DP02-A-1771\"\u003e\u003cimg title=\"V1258-DP02-A-1771\" alt=\"V1258-DP02-A-1771\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1258-DP02-A-1771\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54264776327495,"sku":"V1258-DP02-A-1771","price":25.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883699474759.png?v=1783722445"},{"product_id":"12pcs-bottle-jack-oil-filler-plug-9mm-rubber-floor-jack-parts-for-sealling-hydraulic-jack-oil-ports-universal-hydraulic-jack-parts-accessories","title":"12PCS Bottle Jack Oil Filler Plug,9mm Rubber Floor Jack Parts for Sealling Hydraulic Jack Oil Ports,Universal Hydraulic Jack Parts Accessories","description":"\u003cp\u003eA hydraulic jack that creeps down under load is usually not broken. The small rubber plug covering its oil port has hardened, split or fallen out somewhere, and the jack is losing pressure past it. The repair costs almost nothing — tracking down a single plug when you need one is the hard part.\u003c\/p\u003e\u003ch2\u003eA dozen spares beats hunting for one\u003c\/h2\u003e\u003cp\u003eThe pack holds twelve, which covers the bottle jack in the ute, the trolley jack in the shed and whatever comes home from the next clearing sale. Each plug is moulded in rubber with a conical body, so it wedges into the port and holds under the pressure the jack builds. The taper does the sealing rather than a thread, which is why fitting takes no special tools: pull the old plug, wipe around the port so grit does not go in with the new one, then press it home by hand.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwelve to a pack:\u003c\/strong\u003e enough for several jacks and years of replacements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber seal:\u003c\/strong\u003e keeps oil in and pressure up, so the jack holds its load properly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConical body:\u003c\/strong\u003e wedges into the port and resists deforming under hydraulic pressure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits by hand:\u003c\/strong\u003e no tools, no threads, nothing to strip.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 12 plugs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiameter:\u003c\/strong\u003e 9 mm per the product title; the supplier's description quotes 0.35 inch (8.9 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit:\u003c\/strong\u003e described as universal for jack oil ports of this size — measure your own port\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eGetting under a vehicle safely\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eA jack is a lifting tool, not a support. Once the vehicle is up, put axle stands under it and lower the load onto them before anyone goes underneath.\u003c\/li\u003e\n\u003cli\u003eAfter changing a plug, test the jack under load at ground level and watch for seepage before trusting it.\u003c\/li\u003e\n\u003cli\u003eTop up only with the hydraulic jack oil the jack maker specifies, and do not overfill the reservoir.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCheap enough to keep in the toolbox so a leaking jack never costs you a whole afternoon.\u003c\/p\u003e\u003ch2\u003eReturns, Refunds, and Replacements\u003c\/h2\u003e\u003cp\u003eProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.\u003c\/p\u003e\u003ch2\u003eDelivery Timeframe\u003c\/h2\u003e\u003cp\u003ePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:\u003c\/p\u003e\u003cp\u003eFor customers in Victoria, approximately 7-10 working days;\u003cbr\u003eFor customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;\u003cbr\u003eFor customers in WA, NT, and TAS, approximately 9-12 working days.\u003c\/p\u003e\u003cimg title=\"V1258-DP02-A-1836\" alt=\"V1258-DP02-A-1836\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1258-DP02-A-1836\"\u003e\u003cimg title=\"V1258-DP02-A-1836\" alt=\"V1258-DP02-A-1836\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1258-DP02-A-1836\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54264827478343,"sku":"V1258-DP02-A-1836","price":22.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883723723079.png?v=1783728917"},{"product_id":"swetrace-jack-rubber-pad-enhanced-stability-4pcs","title":"SWETRACE Jack Rubber Pad Enhanced Stability 4Pcs","description":"\u003cp\u003eA square pad, 12 by 12 centimetres and 25 millimetres thick, in black rubber, sitting on the saddle of a trolley jack, which is where SWETRACE's own names for it put it. Four come in a pack, one for each corner if you work your way round. It is the sort of thing you go looking for at the back of the boot in poor light, and the sort of thing you notice the absence of the moment a bare saddle bites into a sill.\u003c\/p\u003e\n\u003ch2\u003eSlotted, with the slot left unmeasured\u003c\/h2\u003e\n\u003cp\u003eSWETRACE uses the word slotted four separate times across this description and never once gives the slot a width or a depth. A pinch weld is a thin folded seam, and whether it will sit down into the groove properly is entirely a question of that dimension. All you get instead is the outside of the pad, 12 by 12 by 2.5 centimetres, which tells you whether it will perch on your saddle but nothing about whether it will grip your seam.\u003c\/p\u003e\n\u003ch2\u003eNothing on this page is rated to hold anything\u003c\/h2\u003e\n\u003cp\u003eThere is no capacity figure here, no tonnage, no rubber hardness and no working temperature. What the description does carry is the assertion that the anti-slip face prevents accidents and ensures safety during lifting. That is a very large promise for a component with no number attached to it anywhere, and the honest position is that you are buying an unrated piece of rubber that goes between a jack and the mass of a car.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber between saddle and car:\u003c\/strong\u003e SWETRACE names it a floor jack adapter and a pinch weld jack adapter and never says what the rubber is there to spare, so read the placement off those names and not off a stated claim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSet of four:\u003c\/strong\u003e the pack line reads four jack pads, enough for a full circuit of the car.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-slip face:\u003c\/strong\u003e the grip is described as secure, which is the basis of the supplier's safety claim.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePad footprint:\u003c\/strong\u003e a 12 centimetre square, 2.5 centimetres deep.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleans and swaps:\u003c\/strong\u003e described as easy to replace and to clean, which rubber that lives under a car will need.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJacks named in general terms:\u003c\/strong\u003e the source says different automotive lift machines and stops there.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePad material:\u003c\/strong\u003e Rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour of the pads:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePad dimensions stored:\u003c\/strong\u003e 12.00X12.00X2.50cm \/ 4.72X4.72X0.98in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity in the pack:\u003c\/strong\u003e 4 jack pads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhere this page runs out of answers\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo lifting capacity is published for these pads, in tonnes or in any other unit, and no rubber hardness is given either. A part that sits in the load path of a jack ought to carry a rating and this one does not.\u003c\/li\u003e\n\u003cli\u003eNot one warning accompanies these pads. Nothing is said about supporting the vehicle once it is up, nothing about where on a sill the pad should sit, and nothing about checking it before you put weight through it. No such note has been written in here to cover the gap.\u003c\/li\u003e\n\u003cli\u003eThe slot is never dimensioned, despite slotted being the word the listing leans on hardest. Measure your own pinch weld and understand that you are ordering without knowing whether it will seat.\u003c\/li\u003e\n\u003cli\u003eNo jack is named. Not a brand, not a model and not a saddle diameter, only the phrase different automotive lift machines. The word universal turns up once, buried in a keyword string rather than made as a claim, and it is not treated as one here.\u003c\/li\u003e\n\u003cli\u003eOne sentence in the description says the pad can be applied to your motorcycle. Every other line on the listing, and the title above it, describes a car floor jack accessory. That single motorcycle reference stands alone and unsupported, and nothing has been built on it here.\u003c\/li\u003e\n\u003cli\u003eTwo separate kinds of corruption sit in this description. Keyword strings have been pushed into the middle of the opening sentence, taking the spaces at the joins with them and fusing words together; and one sentence, which appears twice in the body, has lost its verb both times, so it reads as though the pad does nothing to the performance it is supposed to improve. Neither the fused words nor the broken sentence is quoted here.\u003c\/li\u003e\n\u003cli\u003eThe unit columns agree on this one. Twelve centimetres is 4.72 inches and 2.50 centimetres is 0.98 inches, both as printed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eJudged simply as rubber that keeps a saddle off your sills, it is a sensible thing to own; judged on the safety language wrapped around it, there is no number anywhere to test that language against.\u003c\/p\u003e\n\u003cp\u003eReturns, Refunds, and Replacements\nProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.\u003c\/p\u003e\n\u003cp\u003eDelivery Timeframe\u003c\/p\u003e\n\u003cp\u003ePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:\u003c\/p\u003e\n\u003cp\u003eFor customers in Victoria, approximately 7-10 working days;\nFor customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;\nFor customers in WA, NT, and TAS, approximately 9-12 working days.\u003c\/p\u003e\n\u003cimg title=\"V1189-LWWAL-20260327-03541\" alt=\"V1189-LWWAL-20260327-03541\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1189-LWWAL-20260327-03541\"\u003e\u003cimg title=\"V1189-LWWAL-20260327-03541\" alt=\"V1189-LWWAL-20260327-03541\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1189-LWWAL-20260327-03541\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54265010159943,"sku":"V1189-LWWAL-20260327-03541","price":85.88,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883797877063.png?v=1783737944"},{"product_id":"worgeous-hydraulic-jack-handle-replacement-for-car-repair-with-steel-and-rubber-material-black-2-pcs","title":"Worgeous Hydraulic Jack Handle Replacement for Car Repair with Steel and Rubber Material Black 2 pcs","description":"\u003cp\u003eTwo black handles, each 45 centimetres long on a 3.50 by 3.50 centimetre section, in steel with rubber. A jack lives in the boot and mostly stays put; the lever is the loose piece that migrates, gets lent out and turns up missing on the night you need it. That is what this pack is for. What it is not is a rated component, and the rest of this page is about that gap.\u003c\/p\u003e\n\u003ch2\u003eThree Ton is a keyword string, not a capacity\u003c\/h2\u003e\n\u003cp\u003eThe words 3 Ton appear exactly once in the whole description, hanging off the end of a sentence about the handle being convenient to fit. Every comparable line on this listing ends the same way, with Horizontal Jack Pole, or floor jack Pole Lever, or Hydraulic Jack Pole Lever. They are search terms tacked on for indexing. Three tonnes is therefore not a rating for this product, it has not been treated as one here, and no purchase should rest on it.\u003c\/p\u003e\n\u003ch2\u003eNothing states what jack this belongs to\u003c\/h2\u003e\n\u003cp\u003eNot one line in this description says what the handle is meant to go into. No jack brand, no model, no socket size, no drive size, and no statement of whether the 3.50 centimetres is the bar across the flats or something else. Two handles arrive and the source does not say whether they are a matched pair or two halves that join. On the evidence published, you cannot confirm this will engage your jack.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePair of levers:\u003c\/strong\u003e two floor jack handles per pack, which is exactly how the contents line puts it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBar length:\u003c\/strong\u003e 45 centimetres, on a 3.50 centimetre square section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel with rubber:\u003c\/strong\u003e those are the two materials Worgeous puts on its spec line.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrip that holds:\u003c\/strong\u003e the handle is described as anti-slip so your hands stay put while you are pumping.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStows small:\u003c\/strong\u003e called compact and portable, and usable in tight spaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong sessions:\u003c\/strong\u003e the shape is credited with staying comfortable over extended use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterials on the spec line:\u003c\/strong\u003e Steel, rubber\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour as listed:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSize string held by Worgeous:\u003c\/strong\u003e 45.00X3.50X3.50cm \/ 17.68X1.38X1.38in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack line:\u003c\/strong\u003e 2 x floor jack handles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat is missing here, and what does not agree\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo load rating exists on this listing. Not in tonnes, not in kilograms, not in any unit whatsoever. A jack handle is the lever through which a person puts force into a device holding a car off the ground, yet no capacity is published for it, no steel grade and no finish. See the section above on why the phrase 3 Ton does not fill that hole.\u003c\/li\u003e\n\u003cli\u003eThere is no fitment. Not a jack make, not a model, not a socket or drive size. The listing is nevertheless sold on a promise that it fits many hydraulic trolley and bottle jacks; neither trolley nor bottle occurs at any point in what Worgeous actually wrote, and that text makes no compatibility claim whatsoever, so that promise has nothing at all underneath it. The same text calls the handle a direct fit, which is likewise unsupported.\u003c\/li\u003e\n\u003cli\u003eThere is no warning. Nothing at all about seating the handle properly before you lean on it, nothing about supporting a raised vehicle, nothing about the load path at all. Zero. None has been invented here to make the page look more complete than the source is.\u003c\/li\u003e\n\u003cli\u003eThe description contradicts its own materials. The specification line reads steel and rubber; the first bullet calls the grip anti-slip silicone. Silicone is not rubber. Steel and rubber is what the spec line says and what is published above, with the disagreement flagged rather than resolved.\u003c\/li\u003e\n\u003cli\u003eRecomputed, forty-five centimetres comes to 17.72 inches where 17.68 is what the page carries. The two 3.50 centimetre legs are right at 1.38 inches. Above, that size string appears untouched.\u003c\/li\u003e\n\u003cli\u003eSix words have been deleted out of the supplier's sentences. One loses the adjective in front of a phrase about long service; another stops short and strands a hyphen with nothing in front of it; a third is missing the verb that would say what its design actually does; and a fourth appears twice over in the body, broken identically on each occasion. None of those damaged phrases is quoted above, and none has been guessed back into shape.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eBuy it as a spare lever, judge it on the 45 centimetres and the steel, and treat every number the search text attaches to it as unproven.\u003c\/p\u003e\n\u003cp\u003eReturns, Refunds, and Replacements\nProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.\u003c\/p\u003e\n\u003cp\u003eDelivery Timeframe\u003c\/p\u003e\n\u003cp\u003ePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:\u003c\/p\u003e\n\u003cp\u003eFor customers in Victoria, approximately 7-10 working days;\nFor customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;\nFor customers in WA, NT, and TAS, approximately 9-12 working days.\u003c\/p\u003e\n\u003cimg title=\"V1189-LWWAL-20260327-03519\" alt=\"V1189-LWWAL-20260327-03519\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1189-LWWAL-20260327-03519\"\u003e\u003cimg title=\"V1189-LWWAL-20260327-03519\" alt=\"V1189-LWWAL-20260327-03519\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1189-LWWAL-20260327-03519\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54265017270599,"sku":"V1189-LWWAL-20260327-03519","price":72.15,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883802071367.png?v=1783737976"},{"product_id":"special-socket-wrench-for-jack-jwdx-1-set-of-jack-sockets-jack-socket-sleeve-adapter-heavy-duty-stabilizer-jack-drill-adapter-for-rv-trailer-vehicle-1-2-hex-to-3-4-square-drive-fit-one-size-black","title":"Special Socket Wrench for Jack JWDX, 1 Set of Jack Sockets Jack Socket Sleeve Adapter – Heavy Duty Stabilizer Jack Drill Adapter for Rv Trailer Vehicle – 1\/2” Hex to 3\/4” Square Drive Fit One Size Black","description":"\u003cp\u003eThis description has five feature lines and all five are missing a word. Two have lost the connector out of their own heading, so the stored text reads Time, two spaces, Energy, and Compact, two spaces, Portable. Across the five a verb, a noun and the word that was going to name what the adapter is made of have all gone. What has survived whole is the pair of figures that decide fit: a 1\/2 inch hex shank at the drill end, a 3\/4 inch square drive at the jack end.\u003c\/p\u003e\n\u003ch2\u003eThe line that lost its noun\u003c\/h2\u003e\n\u003cp\u003eHeavy-Duty Construction is the second feature line, and it reads made from high-strength, and then goes straight on to durability and long-lasting performance under heavy loads. High-strength what is never said, on this line or anywhere else. The only material word in the entire listing is metal, on its own, in the specification block. We are not guessing at the word that has gone, and nothing here should be read as an implied one.\u003c\/p\u003e\n\u003ch2\u003eWhat the two ends do\u003c\/h2\u003e\n\u003cp\u003eStabiliser jacks on caravans and trailers are normally wound by hand. The square end of this adapter goes into the jack's own 3\/4 inch socket and the hex shank goes into a drill, which is the whole proposition: no more manual cranking, in the description's phrase. Fitment is claimed as most standard stabiliser jacks on RVs, campers, trailers and vehicles carrying that 3\/4 inch square drive socket. Most is the supplier's word and we are keeping it rather than rounding it up.\u003c\/p\u003e\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrill end:\u003c\/strong\u003e 1\/2 inch hex shank, stated four times over and consistent everywhere.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJack end:\u003c\/strong\u003e 3\/4 inch square drive, to match the socket already on the jack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces the crank handle:\u003c\/strong\u003e that is the job the description gives it, in its own phrase, no more manual cranking.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment the description claims:\u003c\/strong\u003e most standard stabiliser jacks on RVs, campers, trailers and vehicles with the matching socket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe only material word:\u003c\/strong\u003e the word metal, unqualified, and nothing further.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosted weight:\u003c\/strong\u003e 160 grams in the carton.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive taken:\u003c\/strong\u003e 1\/2 in hex\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive given:\u003c\/strong\u003e 3\/4 in square\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial word given:\u003c\/strong\u003e metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight packed:\u003c\/strong\u003e 160 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping carton:\u003c\/strong\u003e 8 x 8 x 3 cm, given also as 3.1 x 3.1 x 1.2 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAllowance printed:\u003c\/strong\u003e 1-3 mm, as the supplier prints it\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContents as itemised:\u003c\/strong\u003e one set of jack sockets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRead this before you put it in a drill\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo rating whatever appears in this listing. No torque figure, no load figure, no maximum, nothing in kilograms or tonnes. The description says under heavy loads and never says how heavy, and we are not putting a number, an implication or a reassuring adjective where the listing has none.\u003c\/li\u003e\n\u003cli\u003eNothing says whether an impact driver may be used, and nothing gives a drill speed or a clutch setting.\u003c\/li\u003e\n\u003cli\u003eNo dimension is given for the adapter itself. The 8 by 8 by 3 centimetres is the box it arrives in, so whether it reaches past a jack housing is a question the page does not take.\u003c\/li\u003e\n\u003cli\u003eThe contents itemisation says one set of jack sockets, plural, and nothing anywhere says how many pieces a set contains.\u003c\/li\u003e\n\u003cli\u003eThe product name calls it a wrench. The description never does; its own name for the part is a jack socket sleeve adapter. The name also says Black and One Size; no colour and no size for the part itself is given.\u003c\/li\u003e\n\u003cli\u003eOur search summary says cordless. The description says power drill and 1\/2 inch hex drill, which does not settle cordless either way.\u003c\/li\u003e\n\u003cli\u003eThe damage: two places where a joining word has gone and both spaces have stayed, each of them printed twice in the body, plus losses of a verb, a noun and a material word elsewhere. Nothing missing has been guessed at here.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eJudge this one on its two interfaces, because they are what the listing states clearly and without damage.\u003c\/p\u003e\n\u003cp\u003eReturns, Refunds, and Replacements\nProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.\u003c\/p\u003e\n\u003cp\u003eDelivery Timeframe\u003c\/p\u003e\n\u003cp\u003ePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:\u003c\/p\u003e\n\u003cp\u003eFor customers in Victoria, approximately 7-10 working days;\nFor customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;\nFor customers in WA, NT, and TAS, approximately 9-12 working days.\u003c\/p\u003e\n\u003cimg title=\"V1189-LWWAL-20260325-02147\" alt=\"V1189-LWWAL-20260325-02147\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1189-LWWAL-20260325-02147\"\u003e\u003cimg title=\"V1189-LWWAL-20260325-02147\" alt=\"V1189-LWWAL-20260325-02147\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1189-LWWAL-20260325-02147\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54265088672071,"sku":"V1189-LWWAL-20260325-02147","price":44.37,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883829956935.png?v=1783741601"},{"product_id":"heavy-duty-bike-hoist-pulley-lift-garage-ceiling-bicycle-storage-rack-w-lock","title":"Heavy Duty Bike Hoist Pulley Lift – Garage Ceiling Bicycle Storage Rack w\/ Lock","description":"\u003cp\u003eFloor space in a suburban garage disappears the moment a second bike comes home. A ceiling hoist puts them where nothing else lives, up above the bonnet, and the pulley blocks mean you are not pressing a bike over your head to get it there.\u003c\/p\u003e\u003ch2\u003eTwenty kilos is the number that matters\u003c\/h2\u003e\u003cp\u003eThe supplier rates this hoist at 20 kg, and that figure decides whether it suits your bike. A road bike or a kid's bike sits comfortably under it. A steel-framed mountain bike with a rack, lights and a lock gets close. Most e-bikes weigh more than 20 kg on their own and are out of scope here, whatever the title says about heavy duty. Weigh the bike first. The 20 kg is given for the hoist as a whole, with no per-hook figure stated.\u003c\/p\u003e\u003ch2\u003eRope, straps and a lock that holds\u003c\/h2\u003e\u003cp\u003eSixteen metres of rope runs through the blocks, which is what makes ceilings up to 3.65 m workable and why a bike you would struggle to hold overhead goes up on a steady pull. Two 2 m straps carry the frame, and the hooks are rubber-coated so a painted top tube never sits against bare steel. The locking mechanism holds the rope once the bike is up, so nothing creeps down while the garage is empty.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-carbon steel hardware:\u003c\/strong\u003e the frame and hooks, not the rope, take the load at the ceiling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber-coated hooks:\u003c\/strong\u003e no metal-to-metal contact with paint, carbon or anodised rims.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot just bikes:\u003c\/strong\u003e ladders, benches and storage nets are listed as suitable within the same limit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight capacity:\u003c\/strong\u003e 20 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum ceiling height:\u003c\/strong\u003e 3.65 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope length:\u003c\/strong\u003e 16 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraps:\u003c\/strong\u003e 2 × 2 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody material:\u003c\/strong\u003e high-carbon steel (spec table says only metal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore you put it in the roof\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFixings must go into structural ceiling framing, not lining alone. The supplier says solid ceilings but lists no fixings as supplied.\u003c\/li\u003e\n\u003cli\u003e20 kg is the stated limit for the whole system. Do not park or stand under a raised bike.\u003c\/li\u003e\n\u003cli\u003eBike not included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAsk us if you need a second set.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eCOM (change of mind) Return Policy:\u003c\/strong\u003e \u003cbr\u003e\u003cstrong\u003eThe product must be unopened and in brand new condition, with the return to be organised by the customer. Once received and verified to be in the condition specified, refund is only of the item value minus 15% restocking fee (not including initial shipping). An additional return charge, which is same cost as that of initial shipping, will be deducted from the refund on returns due to delivery failure caused by customer error. For the health and safety of our staff and other customers, we are unable to accept returns of personal use items.\u003c\/strong\u003e\u003c\/p\u003e\u003cimg title=\"V63-954371\" alt=\"V63-954371\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V63-954371\"\u003e\u003cimg title=\"V63-954371\" alt=\"V63-954371\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V63-954371\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54265403146567,"sku":"V63-954371","price":23.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883940614471.png?v=1783930280"},{"product_id":"900kg-swivel-hydraulic-crane-hoist-jack-ute-trailer-truck-winch-pick-up-lift","title":"900kg Swivel Hydraulic Crane Hoist Jack UTE Trailer Truck Winch Pick up Lift","description":"\u003cp\u003eGetting a generator or a gearbox into a ute tray on your own usually ends with a hire truck or a favour owed. A swivel crane bolted to the tray turns it into a one-person job: lift off the ground, swing it over the side, lower it in.\u003c\/p\u003e\u003ch2\u003eRead the boom position before the headline number\u003c\/h2\u003e\u003cp\u003e900 kg is the supplier's figure with the boom retracted. Extended, the rating drops, and the supplier states that reduced figure two different ways: 225 kg in one place, 450 kg in another. We will not publish either as fact. The principle holds regardless: the further out a load hangs on a telescopic boom, the less the crane takes. Set the arm to the position marked on the unit and treat its plate as the authority.\u003c\/p\u003e\u003ch2\u003eBolted down first, then it swings\u003c\/h2\u003e\u003cp\u003eThe base plate measures 27 × 27 cm with eight mounting holes, which lets it fix hard to a ute tray, a trailer deck or a workshop frame. Once down, the head rotates a full 360°, so a load comes up one side and goes down the other with nobody handling it mid-air. A manual hydraulic pump does the lifting, and the arm telescopes from 100 cm to 140 cm to reach past a tray side.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManual hydraulic pump:\u003c\/strong\u003e works anywhere, with nothing to charge.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollapsible frame:\u003c\/strong\u003e comes down when the tray is needed for something else.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel chain and hook:\u003c\/strong\u003e lifts off the ground without adding your own rigging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowder-coated finish:\u003c\/strong\u003e sensible for gear that lives outdoors on a tray.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum load capacity:\u003c\/strong\u003e 900 kg, stated for the boom retracted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwivel range:\u003c\/strong\u003e 360°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal height:\u003c\/strong\u003e 215 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad arm:\u003c\/strong\u003e 100 cm to 140 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook height:\u003c\/strong\u003e 1900 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 7.5 m long, 4 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase plate:\u003c\/strong\u003e 27 × 27 cm, 8 mounting holes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 49 kg in 2 boxes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e powder-coated steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore you take a load\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUse all eight mounting holes, into structure rated for the load. Tray floors vary and no fixings or substrate are specified.\u003c\/li\u003e\n\u003cli\u003eCapacity falls as the boom extends, and the supplier's extended figure is inconsistent. Never assume 900 kg at full reach.\u003c\/li\u003e\n\u003cli\u003eThe crane holds a load on hydraulic pressure; it is not a support. Nobody works under a suspended load, and anything worked on goes onto rated stands first.\u003c\/li\u003e\n\u003cli\u003eNo standard, certification or test rating is named by the supplier.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWorth a look if loading solo has become the limiting factor.\u003c\/p\u003e\u003cp\u003eFor returns due to change of mind, a 20% restocking fee will be applied.\u003c\/p\u003e\u003cimg title=\"V379-PKUPCRNBOX\" alt=\"V379-PKUPCRNBOX\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V379-PKUPCRNBOX\"\u003e\u003cimg title=\"V379-PKUPCRNBOX\" alt=\"V379-PKUPCRNBOX\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V379-PKUPCRNBOX\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54265404752199,"sku":"V379-PKUPCRNBOX","price":323.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883941302599.png?v=1783930324"},{"product_id":"2-ton-hydraulic-engine-crane-folding-hoist-stand-mobile-lifter-workshop-lift","title":"2 Ton Hydraulic Engine Crane Folding Hoist Stand Mobile Lifter Workshop Lift","description":"\u003cp\u003ePulling an engine is a job the bay does nothing to help with. A crane takes the assembly straight up and out, then wheels it to a stand. When the work is done, this one folds instead of owning a corner of the shed all year.\u003c\/p\u003e\u003ch2\u003eFour boom positions, four different ratings\u003c\/h2\u003e\u003cp\u003eTwo tonnes is the figure with the boom pulled all the way in. Slide it out and the rating steps down through four marked positions, 2 T, 1.5 T, 1 T and 0.5 T, across a boom range of 1050 mm to 1590 mm. That step-down is leverage, not a defect: the further the hook sits from the mast, the harder the load works to tip the frame. Pick the shortest position that reaches the lifting eye.\u003c\/p\u003e\u003ch2\u003eFolds flat when the job is done\u003c\/h2\u003e\u003cp\u003eFolded, the frame comes down to 1440 × 1000 × 620 mm, so it stands against a wall rather than blocking a bay. Six cast-iron swivel castors at 3.5 in carry it. Cast iron is the right call because a loaded crane puts a hard point load through each castor, which is what flattens plastic wheels. The swivel hook lets an engine rotate to clear the bay instead of fighting the chain.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-gauge structural steel:\u003c\/strong\u003e the section, not the paint, carries a two-tonne rating.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrop-forged swivel hook:\u003c\/strong\u003e forged rather than cast, and free to turn as a load settles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChain and shackle set included:\u003c\/strong\u003e reaches standard engine lifting points out of the box.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips in three boxes:\u003c\/strong\u003e 22, 29 and 30 kg, so it comes in without a forklift.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 2 tonne (2000 kg)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoom positions:\u003c\/strong\u003e 0.5 T \/ 1 T \/ 1.5 T \/ 2 T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoom range:\u003c\/strong\u003e 1050 – 1590 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eItem dimensions:\u003c\/strong\u003e 70 × 160 × 150 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFolded dimensions:\u003c\/strong\u003e 1440 × 1000 × 620 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheels:\u003c\/strong\u003e 6 × cast-iron swivel castors, 3.5 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e heavy-gauge structural steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e powder-coated, rust-resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e 3 boxes (22 kg, 29 kg, 30 kg)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFolding engine crane, in 3 boxes for assembly\u003c\/li\u003e\n\u003cli\u003eChain and shackle set\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore the first lift\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMatch the boom position to the weight. The 2 T rating applies at the retracted setting only.\u003c\/li\u003e\n\u003cli\u003eA crane lifts; it holds nothing up for you. Never work under a suspended engine, and never leave a load hanging unattended.\u003c\/li\u003e\n\u003cli\u003eThe supplier's copy refers to Australian standards but names no standard, test or certificate. Treat the crane as uncertified unless documentation arrives with it.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAsk us about engine stands and load levellers too.\u003c\/p\u003e\u003cp\u003eFor returns due to change of mind, a 20% restocking fee will be applied.\u003c\/p\u003e\u003cimg title=\"V379-2TFLDCRANE\" alt=\"V379-2TFLDCRANE\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V379-2TFLDCRANE\"\u003e\u003cimg title=\"V379-2TFLDCRANE\" alt=\"V379-2TFLDCRANE\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V379-2TFLDCRANE\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54265404817735,"sku":"V379-2TFLDCRANE","price":285.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883941368135.png?v=1783930324"},{"product_id":"2x-8mm-hammerlock-eye-sling-hook-safety-chain-caravan-trailer-connecting-extend","title":"2X 8mm Hammerlock+ Eye Sling Hook Safety Chain Caravan Trailer connecting Extend","description":"\u003cp\u003eA chain leg is only as good as what is on the end of it. These are grade 80 drop-forged eye sling hooks with safety latches, supplied as a pair with matching 8 mm hammerlocks so they join onto chain without a shackle or a trip to the rigging shop.\u003c\/p\u003e\u003ch2\u003eWhat the 1.12 tonne rating actually covers\u003c\/h2\u003e\u003cp\u003eThe supplier quotes a working load limit of 1.12 tonnes for the hook, a breaking force of 4.48 tonnes and a design factor of 4:1. Those figures agree with each other. Two hooks in a pack does not make 2.24 tonnes, though. A working load limit belongs to one component and cannot be added across a set, and any assembly is capped by its weakest part: the chain, the hammerlock or the hook.\u003c\/p\u003e\u003ch2\u003eForged, and specified down to the alloy\u003c\/h2\u003e\u003cp\u003eThe hook body is 40CrMo and the latch 35CrMo, both chromium-molybdenum steels, drop-forged rather than cast. That matters in lifting gear because a forged hook tends to deform visibly under overload instead of letting go without warning, which gives you something to inspect for. The latch closes the throat so a sling or chain eye cannot jump out when a load swings or goes slack.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSold as a pair:\u003c\/strong\u003e two hooks and two 8 mm hammerlocks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHammerlock connectors:\u003c\/strong\u003e join a hook to a chain leg without a shackle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade 80 alloy steel:\u003c\/strong\u003e the grade the supplier states for lifting chain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeather finish:\u003c\/strong\u003e the supplier lists resistance to rain, dirt and mud.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e eye sling hook with latch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e 80, as stated by the supplier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated WLL:\u003c\/strong\u003e 1.12 tonne, quoted for the hook\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreaking force:\u003c\/strong\u003e 4.48 tonne\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety factor:\u003c\/strong\u003e 4:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook material:\u003c\/strong\u003e 40CrMo alloy steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLatch material:\u003c\/strong\u003e 35CrMo alloy steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacture:\u003c\/strong\u003e drop-forged and die-forged\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHammerlock size:\u003c\/strong\u003e 8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e called painted in one line and zinc-plated in another\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e2 × 8 mm hammerlock plus sling hook\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eBefore you rig with these\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1.12 tonne is the figure given for the hook. Never add ratings across the pair, and never assume an assembly is rated above its lowest component.\u003c\/li\u003e\n\u003cli\u003eInspect before every lift. A bent throat, a stretched eye or a latch that will not close means the hook is finished.\u003c\/li\u003e\n\u003cli\u003eThe title mentions caravan and trailer safety chain use, but no towing or safety-chain standard is named. Requirements are set by your state road authority, so confirm them first.\u003c\/li\u003e\n\u003cli\u003eNobody stands under a suspended load, and these are not for lifting people.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSensible spares for the trailer toolbox.\u003c\/p\u003e\u003cbr\u003eNOTE:PO BOX address is not supported, please provide the correct physical address\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eATTENTION:\u003c\/strong\u003e\u003cbr\u003eIf the customer change their mind and want to cancel the order, please contact us within 2-3 hours after placing the order. Or, once the package is dispatched, we won\\'t be able to intercept packages in transit. Please understand.\u003c\/p\u003e\u003cdiv\u003eRefund note: Only return the product cost, not refund the freight!!!\u003cbr\u003e\n\u003c\/div\u003e\u003cdiv\u003e\n\u003cbr\u003eTip:Due to the high freight costs in some areas, there may be additional charges. Thank you for your understanding.\u003c\/div\u003e\u003cimg title=\"V201-QUEW13215885\" alt=\"V201-QUEW13215885\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V201-QUEW13215885\"\u003e\u003cimg title=\"V201-QUEW13215885\" alt=\"V201-QUEW13215885\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V201-QUEW13215885\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54265614270791,"sku":"V201-QUEW13215885","price":32.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883954245959.png?v=1783933235"},{"product_id":"labor-saving-wrench-auto-jack-ratchet-wrench-car-jack-and-lug-wrench-handle-for-motorcycle-car-suv-and-other-vehicles","title":"Labor Saving Wrench Auto Jack Ratchet Wrench Car Jack And Lug Wrench Handle For Motorcycle, Car, Suv And Other Vehicles","description":"\u003cp\u003eKneeling beside a highway in the dark, turning the folded steel rod that came with the car a quarter turn at a time because there is no room to swing it past the sill. That is the part of a roadside wheel change nobody misses. A ratchet handle turns the same job into a short back and forth stroke.\u003c\/p\u003e\u003ch2\u003eA short stroke instead of a full turn\u003c\/h2\u003e\u003cp\u003eA scissor jack raises by turning a threaded rod, and the standard handle needs a complete circle of clear air to do it. Beside a kerb, against a rock, or under the low sill of a loaded 4WD, that circle is rarely there. The ratcheting head only needs the arc you can actually reach, and the 360 degree rotating head lets you set the handle to whatever angle the ground allows. At 27 cm long it stays manageable in a confined space rather than fouling bodywork.\u003c\/p\u003e\u003ch2\u003eCheck the fit against your own jack first\u003c\/h2\u003e\u003cp\u003eThe supplier gives the handle a thickness of 0.6 cm and a diameter of 2.5 cm. Its compatibility line is where the data falls apart: one place says it suits scissor jacks with a thickness of 0.5 cm, another says a diameter of 0.5 cm. Those describe different things and the listing never settles which is meant. Both are printed below. Measure the drive eye on your own jack before ordering rather than trusting either line.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRatcheting action:\u003c\/strong\u003e useful exactly where a full-circle swing is impossible, which is most roadside verges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotating head:\u003c\/strong\u003e turns through 360 degrees, so the handle angles to the ground rather than the jack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMetal construction:\u003c\/strong\u003e described by the supplier as compact, firm, durable and rust resistant.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoot-sized:\u003c\/strong\u003e 27 x 5 x 5 cm, so it stores with the jack instead of in a tool drawer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e metal, with no grade or alloy identified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle thickness:\u003c\/strong\u003e approximately 0.6 cm (0.236 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle diameter:\u003c\/strong\u003e approximately 2.5 cm (0.98 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJack compatibility, version one:\u003c\/strong\u003e scissor jack with a thickness of 0.5 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJack compatibility, version two:\u003c\/strong\u003e scissor jack with a diameter of 0.5 cm (0.19 in) - the listing contradicts itself here\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall size:\u003c\/strong\u003e 27 x 5 x 5 cm (10.6 x 1.96 x 1.96 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSocket sizes, drive size, torque output and load rating:\u003c\/strong\u003e none of these figures exist anywhere in the source material\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\u003cli\u003e1 x labour-saving ratchet wrench\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eWhat this tool is not\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eIt winds the jack's screw. The jack does the lifting and the jack carries the load. No lifting, supporting or holding capacity is quoted for this handle and none should be assumed.\u003c\/li\u003e\n\u003cli\u003eNever put any part of your body under a vehicle held up by a jack alone. Support it on axle stands before you go underneath.\u003c\/li\u003e\n\u003cli\u003ePark on firm level ground, apply the park brake and chock a wheel on the opposite corner before raising anything.\u003c\/li\u003e\n\u003cli\u003eWheel nuts must be tightened to the figure in your vehicle manufacturer's handbook, using a torque wrench. A labour-saving ratchet gives no torque reading at all, so it cannot set final tension on a wheel.\u003c\/li\u003e\n\u003cli\u003eThe title describes it as a lug wrench, but the supplier's own text covers only jack operation and names no socket or nut size.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSitting next to the jack in the boot, it makes the tyre change you eventually have to do a lot less miserable.\u003c\/p\u003e\u003ch2\u003eReturns, Refunds and Replacements\u003c\/h2\u003e\n\u003cp\u003eProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.\u003c\/p\u003e\n\n\u003ch2\u003eDelivery Timeframe\u003c\/h2\u003e\n\u003cp\u003ePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFor customers in Victoria, approximately 7-10 working days;\u003c\/li\u003e\n  \u003cli\u003eFor customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;\u003c\/li\u003e\n  \u003cli\u003eFor customers in WA, NT, and TAS, approximately 9-12 working days.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cimg title=\"V1188-MS-227-2113\" alt=\"V1188-MS-227-2113\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1188-MS-227-2113\"\u003e\u003cimg title=\"V1188-MS-227-2113\" alt=\"V1188-MS-227-2113\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1188-MS-227-2113\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54265682723143,"sku":"V1188-MS-227-2113","price":33.33,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10883998515527.png?v=1783953199"},{"product_id":"800kg-electric-hoist-winch-crane-12v-swivel-car-truck-ute-lift-360-pick-up","title":"800kg Electric Hoist Winch Crane 12V Swivel Car Truck UTE Lift 360° Pick up","description":"\u003cp\u003eLoading a generator into a ute tray on your own is how backs get wrecked. This 12 V crane hoist bolts to the tray or a workshop bench, swings on a swivel arm and does the lifting for you, run off a wired remote so both hands stay clear of the load.\u003c\/p\u003e\u003ch2\u003eTwo ratings, and the rigging decides which one applies\u003c\/h2\u003e\u003cp\u003eThe supplier quotes two figures and they are not interchangeable: 500 kg (1102 lb) on a single line, 800 kg (1763 lb) double line. The difference is the reeving. Run the rope straight off the drum and the full weight sits on it; run it down through a block and back, and the load splits across two falls. The lift speeds bear that out — roughly 10 m\/min single, roughly 5 m\/min double. Doubling up also halves how far the hook travels, so plan your headroom against the 9.2 m of 4.8 mm cable on the drum before you start.\u003c\/p\u003e\u003ch2\u003eTwelve volts, so it works wherever the ute is\u003c\/h2\u003e\u003cp\u003eThe motor is rated at about 1000 W and runs on 12 V DC, which means the hoist works off a vehicle or trailer battery instead of needing mains power or a generator on site. A draw that size will flatten a battery quickly on repeated lifts, so run the engine while you work and use cable heavy enough for the run. The body is powder-coated steel, the mount is a swivel arm on a supplied bracket, and an automatic brake holds the drum when you release the remote rather than letting the load creep back down.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo stated ratings:\u003c\/strong\u003e 500 kg single line and 800 kg double line, quoted exactly as the supplier states them — the two are not added together.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWired remote:\u003c\/strong\u003e lets you stand away from the load and the drum while it is under tension.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic brake:\u003c\/strong\u003e holds the drum the moment you let go of the control instead of letting the hook drift down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwivel arm and bracket:\u003c\/strong\u003e pick a load up off the ground, then swing it across into the tray without setting it down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e9.2 m of 4.8 mm steel cable:\u003c\/strong\u003e enough drum for tray-height work with some spare wraps left on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowder-coated steel body:\u003c\/strong\u003e a coated finish handles tray grit and wet weather better than bare steel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifting capacity, single line:\u003c\/strong\u003e 500 kg \/ 1102 lb (supplier's figure)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifting capacity, double line:\u003c\/strong\u003e 800 kg \/ 1763 lb (supplier's figure)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor power:\u003c\/strong\u003e approximately 1000 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 9.2 m steel cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable diameter:\u003c\/strong\u003e 4.8 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifting speed, single line:\u003c\/strong\u003e approximately 10 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifting speed, double line:\u003c\/strong\u003e approximately 5 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMount type:\u003c\/strong\u003e swivel lift with bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl:\u003c\/strong\u003e wired remote controller\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake:\u003c\/strong\u003e automatic brake\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e powder-coated steel body\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptions:\u003c\/strong\u003e Style A and Style B — the supplier's text does not state what differs between them\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore you lift with it\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWork to the rating that matches your rigging. Single line is 500 kg, double line is 800 kg; the figures are alternatives, not a total.\u003c\/li\u003e\n\u003cli\u003eNever lift or carry a person, and never stand or reach under a suspended load. A brake is a mechanical part and mechanical parts fail.\u003c\/li\u003e\n\u003cli\u003eIf the hoist is used to raise any part of a vehicle, it lifts only. Lower the vehicle onto rated stands before anyone goes underneath it.\u003c\/li\u003e\n\u003cli\u003eThe mounting point carries everything the hook does, plus shock loading. Bolt it to structure that can take it, not to sheet metal.\u003c\/li\u003e\n\u003cli\u003eThe supplier does not name any standard, certification or test rating for this hoist. Confirm it suits your duty cycle and application before relying on it.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA straightforward 12 V hoist for tray, trailer and shed work. Check the two capacity figures against the job in front of you and rig accordingly.\u003c\/p\u003e\u003cp\u003eFor returns due to change of mind, a 20% restocking fee will be applied.\u003c\/p\u003e\u003cimg title=\"V379-EWINCHCRAN\" alt=\"V379-EWINCHCRAN\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V379-EWINCHCRAN\"\u003e\u003cimg title=\"V379-EWINCHCRAN\" alt=\"V379-EWINCHCRAN\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V379-EWINCHCRAN\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Style A","offer_id":54265732170055,"sku":"V379-EWINCHCRAN","price":478.99,"currency_code":"AUD","in_stock":false},{"title":"Style B","offer_id":54302259904839,"sku":"V379-EWINCHCRANE001","price":500.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10884038394183.png?v=1783972474"},{"product_id":"900kg-swivel-hydraulic-crane-hoist-12v-electric-jack-trailer-ute-pick-up-lift","title":"900kg Swivel Hydraulic Crane Hoist 12V Electric Jack Trailer UTE Pick up Lift","description":"\u003cp\u003ePulling an engine in a home shed usually means borrowing a gantry you have nowhere to store. This crane bolts to a 270 mm square base on a tray, trailer or dock, folds down to 1350 mm when you are done, and swings a full 360 degrees so a load can be set down anywhere within its arc.\u003c\/p\u003e\u003ch2\u003eWhere the 900 kg figure comes from\u003c\/h2\u003e\u003cp\u003eRead the ratings closely, because they are not one number. The supplier lists the hydraulic pump at a maximum of 900 kg, the electric winch at a maximum of 450 kg on a single line, and 800 kg double line. In other words the headline 900 kg belongs to the hydraulic ram, not to the winch — a load between 800 and 900 kg is a pump job. The boom lock positions are quoted only in imperial, at 1000 lbs and 2000 lbs, with no metric equivalent given and no stated relationship to the other three figures. Match the figure to the mechanism you are actually using.\u003c\/p\u003e\u003ch2\u003eSized to leave the tray usable\u003c\/h2\u003e\u003cp\u003eFootprint is what decides whether a tray crane earns its place. The mounting base measures 270 mm by 270 mm, so it takes up about the same room as a milk crate in the corner of a ute tray or trailer deck. Lift height runs to 1785 mm measured from the base to the hook, and the boom drops to a 1350 mm storage height between jobs. The drum carries 6 m of 5 mm cable. The column lifts off its base entirely, so the crane can move between mounts or come inside out of the weather. Net weight is 61 kg — a two-person carry.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree separate ratings:\u003c\/strong\u003e hydraulic pump to 900 kg, winch to 450 kg single line and 800 kg double line, as stated by the supplier.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360-degree swivel:\u003c\/strong\u003e set a load down anywhere in the arc rather than repositioning the vehicle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifts off its base:\u003c\/strong\u003e the column detaches, so one crane can serve several mounts and be stored under cover.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e270 mm square base:\u003c\/strong\u003e a small enough footprint to leave the rest of a ute tray working.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo boom lock positions:\u003c\/strong\u003e quoted by the supplier as 1000 lbs and 2000 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1785 mm to 1350 mm:\u003c\/strong\u003e full lift height when working, folded height when it is out of the way.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e electric swivel hydraulic crane\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated capacity (supplier headline):\u003c\/strong\u003e 900 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic pump rating:\u003c\/strong\u003e maximum 900 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectric winch, single line:\u003c\/strong\u003e maximum 450 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectric winch, double line:\u003c\/strong\u003e maximum 800 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwivel range:\u003c\/strong\u003e 360 degrees\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoom lock positions:\u003c\/strong\u003e 1000 lbs \/ 2000 lbs (supplier states imperial only)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower requirement:\u003c\/strong\u003e 12 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifting cable:\u003c\/strong\u003e 6 m length, 5 mm diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifting height, base to hook:\u003c\/strong\u003e 1785 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage height, folded:\u003c\/strong\u003e 1350 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting base:\u003c\/strong\u003e 270 mm x 270 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial and finish:\u003c\/strong\u003e heavy-duty steel, rugged coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet weight:\u003c\/strong\u003e 61 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRead this before the first lift\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDo not treat 900 kg as the winch rating. The winch is rated to 450 kg single line and 800 kg double line; only the hydraulic pump is rated to 900 kg.\u003c\/li\u003e\n\u003cli\u003eNobody under a suspended load, and nothing lifted over a person. Keep bystanders outside the swing of the boom.\u003c\/li\u003e\n\u003cli\u003eWhere the crane is used to raise part of a vehicle, it lifts only. Support the vehicle on rated stands before anyone works underneath.\u003c\/li\u003e\n\u003cli\u003eAt 61 kg plus its rated load, the mounting point matters more than the crane. Check the tray, deck or dock structure and its own load rating before bolting down.\u003c\/li\u003e\n\u003cli\u003eNo standard, certification or test rating is named by the supplier for this crane or its cable.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA compact swivel crane for tray, trailer and dock work. Sort out which of the three ratings your load falls under, and rig to that one.\u003c\/p\u003e\u003cp\u003eFor returns due to change of mind, a 20% restocking fee will be applied.\u003c\/p\u003e\u003cimg title=\"V379-ESWIVLCRAN\" alt=\"V379-ESWIVLCRAN\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V379-ESWIVLCRAN\"\u003e\u003cimg title=\"V379-ESWIVLCRAN\" alt=\"V379-ESWIVLCRAN\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V379-ESWIVLCRAN\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54265732628807,"sku":"V379-ESWIVLCRAN","price":490.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10884038984007.png?v=1783972474"},{"product_id":"500kg-engine-support-bar-beam-transmission-gearbox-lift-hoist-crane-garage","title":"500Kg Engine Support Bar Beam Transmission Gearbox Lift Hoist Crane Garage","description":"\u003cp\u003eDropping a subframe or pulling a gearbox on a front-drive car means the engine mounts come out while the engine is still sitting in the bay. Something has to hold it there. This Fiernero beam spans the engine bay from guard to guard and takes the weight through two chain-mounted hooks while you work underneath the mounts.\u003c\/p\u003e\u003ch2\u003eThe 500 kg figure, exactly as Fiernero states it\u003c\/h2\u003e\u003cp\u003eFiernero publishes a load capacity of 500 kg for this beam. What the supplier does not state is the basis of that number — whether it is a working load limit, a static rating, a proof figure, or a value tested to any particular standard. Treat 500 kg as an absolute ceiling with no assumed reserve, and do not use the beam on anything you suspect is heavier. If you need a documented rating for insurance or a workplace, ask us and we will request it from Fiernero in writing.\u003c\/p\u003e\u003ch2\u003eAdjusting across the bay\u003c\/h2\u003e\u003cp\u003eThe beam adjusts out to approximately 1,500 mm of width, according to the supplier, so it can be set to land on solid structure at each end rather than on a plastic cowl or a washer bottle. Rubber-padded feet spread that contact and keep paint intact. Two adjustable hooks run on chains, which lets you position the pick-up points over the engine's natural lifting eyes and trim the balance rather than fighting it. The frame is steel with a powder-coated finish.\u003c\/p\u003e\u003ch2\u003eSupport the engine from below as well\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAlways carry the engine on a second support underneath — a trolley jack with a timber spreader, or purpose-made stands — not on the beam alone.\u003c\/li\u003e\n\u003cli\u003eNobody puts any part of themselves under a load held only by a support bar.\u003c\/li\u003e\n\u003cli\u003eCheck both feet are seated on structure that can take the load before you release a single mount.\u003c\/li\u003e\n\u003cli\u003eInspect the chains and hooks for stretch, cracking or wear before every use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Fiernero\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Adjustable Engine Support Beam 500kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad capacity:\u003c\/strong\u003e 500 kg (basis not stated by the supplier)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e heavy-duty steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e powder-coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment range:\u003c\/strong\u003e up to approximately 1,500 mm width\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHooks:\u003c\/strong\u003e dual adjustable, chain-mounted\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFeet:\u003c\/strong\u003e rubber-padded\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eListed application:\u003c\/strong\u003e front-wheel drive vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAsk us about the beam's collapsed length if bay clearance is tight on your vehicle.\u003c\/p\u003e\u003cp\u003eFor returns due to change of mind, a 20% restocking fee will be applied.\u003c\/p\u003e\u003cimg title=\"V379-ENGSUPRBEA\" alt=\"V379-ENGSUPRBEA\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V379-ENGSUPRBEA\"\u003e\u003cimg title=\"V379-ENGSUPRBEA\" alt=\"V379-ENGSUPRBEA\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V379-ENGSUPRBEA\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54265733153095,"sku":"V379-ENGSUPRBEA","price":70.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10884039573831.png?v=1783972474"},{"product_id":"8-ton-hydraulic-ram-jack-lift-shop-crane-engine-hoist-lifting-double-dual-pump","title":"8 Ton Hydraulic Ram Jack Lift Shop Crane Engine Hoist Lifting Double Dual Pump","description":"\u003cp\u003eA shop crane with a tired ram turns a ten-minute engine pull into an afternoon of pumping. This long ram jack is the cylinder that does the work in that sort of setup: clevis-mounted at the base, driven by a double pump, and fitted with a slow-release valve so a load comes down under control rather than in a rush.\u003c\/p\u003e\u003ch2\u003eFifty centimetres of stroke\u003c\/h2\u003e\u003cp\u003eTwo numbers matter when a long ram goes into a crane: how short it closes, and how far it travels. This one measures 66 cm (26 in) closed and 116 cm (45.7 in) fully out, giving a stroke of 50 cm (19.7 in). The closed length is what has to fit between the mounting points on your crane or press, so measure that gap before ordering rather than after. Stroke is what turns into boom travel once the geometry multiplies it. The cylinder is 8 cm across with a 3 cm rod, and the mounting pinholes are 1.7 cm.\u003c\/p\u003e\u003ch2\u003eTwo pistons, fewer strokes\u003c\/h2\u003e\u003cp\u003eA double pump is two pistons of different bore working off one handle. The big one shifts a lot of oil per stroke to close the gap quickly while the ram is barely loaded; as pressure builds, the small one takes over and gives you the mechanical advantage to keep going. On a long ram that saves a lot of arm work, because most of the 50 cm of travel happens before the load comes on. Bringing it back down is handled by a slow-release valve rather than a dump, and the handle is rubber-gripped so oily hands still get purchase.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier rating of 8 ton:\u003c\/strong\u003e quoted as written — the supplier does not state whether this means metric tonnes or short tons.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-pump head:\u003c\/strong\u003e two piston bores off one handle, so the fast strokes happen while the ram is unloaded.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e50 cm stroke:\u003c\/strong\u003e 66 cm closed, 116 cm extended, which is the working range you have to design your mounting around.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlow-release valve:\u003c\/strong\u003e meters the descent instead of dropping the load when the valve cracks open.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClevis-style base:\u003c\/strong\u003e pins into a crane or hoist frame rather than sitting loose on a pad.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRubber-gripped handle:\u003c\/strong\u003e still grippable with oil or grease on your hands.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLifting capacity:\u003c\/strong\u003e 8 ton (basis not stated by the supplier — metric tonnes or short tons is not specified)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump type:\u003c\/strong\u003e dual piston \/ double pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum height, closed:\u003c\/strong\u003e 26 in \/ 66 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum height, extended:\u003c\/strong\u003e 45.7 in \/ 116 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStroke length:\u003c\/strong\u003e 19.7 in \/ 50 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinder diameter:\u003c\/strong\u003e 3.1 in \/ 8 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePiston rod diameter:\u003c\/strong\u003e 1.2 in \/ 3 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePinhole diameter:\u003c\/strong\u003e 0.7 in \/ 1.7 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase type:\u003c\/strong\u003e clevis-style mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRelease valve:\u003c\/strong\u003e slow-release control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e rubber grip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e high-grade steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 10 kg as stated by the supplier\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eThis jack lifts — it does not hold\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eA hydraulic jack is a lifting device only. Never get under a vehicle or a load held up by this ram: lower it onto rated stands or blocks first, then check they are carrying the weight before anyone goes underneath.\u003c\/li\u003e\n\u003cli\u003eSeals leak and valves weep. A ram left holding a load for any length of time will settle, which is another reason the load belongs on solid support.\u003c\/li\u003e\n\u003cli\u003eThe 8 ton figure is the ram's own rating. It says nothing about the crane, press or frame you fit it to — work to whichever rating is lower.\u003c\/li\u003e\n\u003cli\u003eNo standard, certification or test rating is named by the supplier for this jack.\u003c\/li\u003e\n\u003cli\u003eCheck the stated 10 kg weight and the 66 cm closed height against your own measurements on arrival; both need to suit the frame before you load it.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA long ram built for crane, press and hoist duty. Measure your closed-length gap first, and pair it with proper stands for anything that has to be worked on.\u003c\/p\u003e\u003cp\u003eFor returns due to change of mind, a 20% restocking fee will be applied.\u003c\/p\u003e\u003cimg title=\"V379-8TRAMJACK0\" alt=\"V379-8TRAMJACK0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V379-8TRAMJACK0\"\u003e\u003cimg title=\"V379-8TRAMJACK0\" alt=\"V379-8TRAMJACK0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V379-8TRAMJACK0\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54265733677383,"sku":"V379-8TRAMJACK0","price":75.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10884040065351.png?v=1783972474"},{"product_id":"under-hoist-stand-1650lbs-3-4ton-movable-pole-jack-heavy-duty-support-car-lift","title":"Under Hoist Stand 1650lbs 3\/4Ton Movable Pole Jack Heavy Duty Support Car Lift","description":"\u003cp\u003eDropping a gearbox on your own is a juggling act — one hand on the bellhousing bolts, the other trying to stop the box from swinging. An under-hoist stand takes that weight instead. This one is a threaded steel post on a tripod base, adjustable between 1.1 and 1.8 m, rated by the supplier at 750 kg.\u003c\/p\u003e\u003ch2\u003eA prop, not a jack\u003c\/h2\u003e\u003cp\u003eThe distinction matters. A stand like this is designed to take the weight of a component — an exhaust section, a subframe, a gearbox — while the vehicle itself is already held up by a hoist or a set of rated stands. It is not a lifting device, and the 750 kg figure is not a licence to raise anything with it. Height is set with an ACME-threaded screw, the same square-profile thread used on machine vices because it drives load along the axis without trying to unwind itself, and a non-slip saddle pad sits between the post and the part.\u003c\/p\u003e\u003ch2\u003eSeventy centimetres of adjustment on a tripod foot\u003c\/h2\u003e\u003cp\u003eRange runs from 1.1 m closed to 1.8 m fully out — 43.3 to 70.9 inches — which covers a vehicle sitting low on a two-post hoist through to one lifted for full underbody access. The base is a tripod rather than four legs, and that is deliberate: three feet always sit flat, so a patched or sloping workshop floor does not leave the post rocking on a high corner. Construction is steel throughout with a powder-coated finish, which is the part that keeps a stand living in a wash bay from rusting at the thread.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplier rating of 750 kg:\u003c\/strong\u003e stated as 750 kg \/ 1650 lb, described by the supplier as 3\/4 ton, for one stand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eACME-threaded adjustment:\u003c\/strong\u003e a square-profile thread that carries load along its axis and does not back off on its own.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.1 m to 1.8 m range:\u003c\/strong\u003e reaches from a low hoist setting up to full underbody clearance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTripod base:\u003c\/strong\u003e three feet find their own level on an uneven or patched workshop floor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNon-slip saddle pad:\u003c\/strong\u003e grips the component and keeps steel off painted or plated surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowder-coated steel:\u003c\/strong\u003e the finish is what stops the thread seizing up on a stand that lives near a wash bay.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 750 kg \/ 1650 lb, described by the supplier as 3\/4 ton, per stand\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Fiernero\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum height:\u003c\/strong\u003e 1.1 m \/ 43.3 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum height:\u003c\/strong\u003e 1.8 m \/ 70.9 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment type:\u003c\/strong\u003e ACME-threaded screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking:\u003c\/strong\u003e self-locking thread design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase type:\u003c\/strong\u003e tripod\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e heavy-duty steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e powder-coated, rust-resistant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSaddle:\u003c\/strong\u003e non-slip pad\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e automotive and workshop component support\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow to use this safely\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThis is a support stand, not a jack and not a vehicle stand. The vehicle must already be held up by a hoist or by rated vehicle stands before this post goes anywhere near it.\u003c\/li\u003e\n\u003cli\u003eNever rely on a jack of any kind to hold a vehicle while you are under it. Raise it, then transfer the weight onto rated stands and confirm they are taking it.\u003c\/li\u003e\n\u003cli\u003eThe 750 kg figure applies to a single stand. Do not add ratings together across two stands to justify a heavier component.\u003c\/li\u003e\n\u003cli\u003eWind the post up to meet the component rather than trying to lift with it, and set the tripod on firm level floor, not on a ramp or a drain grate.\u003c\/li\u003e\n\u003cli\u003eNo standard, certification or test rating is named by the supplier for this stand.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA useful third hand for exhaust, driveline and suspension work. Set it up as a prop under a vehicle that is already properly supported, and it will hold a component steady while you undo the last bolt.\u003c\/p\u003e\u003cp\u003eFor returns due to change of mind, a 20% restocking fee will be applied.\u003c\/p\u003e\u003cimg title=\"V379-UNDERHOIST\" alt=\"V379-UNDERHOIST\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V379-UNDERHOIST\"\u003e\u003cimg title=\"V379-UNDERHOIST\" alt=\"V379-UNDERHOIST\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V379-UNDERHOIST\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54265734005063,"sku":"V379-UNDERHOIST","price":91.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10884040524103.png?v=1783972494"},{"product_id":"10-ton-hydraulic-shop-press-workshop-jack-bending-stand-h-frame-tool-stand","title":"10 Ton Hydraulic Shop Press Workshop Jack Bending Stand H-Frame Tool Stand","description":"\u003cp\u003ePressing a wheel bearing out with a hammer and a socket is how hubs get wrecked. A press puts the load straight down the centre line, slowly, somewhere you can watch it happen. This is the smaller H-frame in the range, rated by its supplier at 10 Ton, with a bottle jack doing the work by hand.\u003c\/p\u003e\u003ch2\u003eWhere the 125 mm stroke sets the limit\u003c\/h2\u003e\u003cp\u003eRam stroke is 125 mm, and that single figure decides more jobs than the tonnage does. It is how far the ram travels in one pass, so anything deeper has to be handled by moving the table rather than pumping further. The table sits on four positions, shifted by hand, which is how you close the gap for a short job and open it up for a long one. Set the workpiece so the ram meets it early in the stroke and the useful travel stays in reserve where you need it.\u003c\/p\u003e\u003ch2\u003eHand pump, no air line\u003c\/h2\u003e\u003cp\u003eThe hydraulic side is a manual bottle jack, so nothing needs compressed air or a power point at the bench. Two return springs lift the ram back after each press instead of leaving you to wind it up again. The ram itself is treated and polished, which matters because a scored ram chews through its seal and starts weeping oil. Frame and plates carry a lead-free powder coat, so oil and grease wipe off rather than soaking into the finish.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 Ton rating:\u003c\/strong\u003e the supplier's stated pressing force for the press.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour-position table:\u003c\/strong\u003e moved manually to set working height for the job in hand.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwin return springs:\u003c\/strong\u003e lift the ram back between presses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTreated and polished ram:\u003c\/strong\u003e a smooth ram is what keeps the seal alive.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLead-free powder coat:\u003c\/strong\u003e resists oil, grease and workshop dirt.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Fiernero\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Shop Press - 10 Ton Hydraulic Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressing force:\u003c\/strong\u003e 10 Ton\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRam stroke:\u003c\/strong\u003e 125 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking platform:\u003c\/strong\u003e 4 positions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e heavy-duty steel H-frame\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHydraulic type:\u003c\/strong\u003e manual bottle jack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e powder-coated, lead-free paint\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 30 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall frame dimensions:\u003c\/strong\u003e not published by the supplier\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 x hydraulic shop press\u003c\/li\u003e\n\u003cli\u003e2 x arbour plates\u003c\/li\u003e\n\u003cli\u003e1 x bottle jack\u003c\/li\u003e\n\u003cli\u003e1 x handle\u003c\/li\u003e\n\u003cli\u003e2 x springs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore you press anything\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOverall height, width and throat clearance are not published. Measure your space before committing to a 30 kg frame.\u003c\/li\u003e\n\u003cli\u003eThe 10 Ton figure is the supplier's own rating and no test standard is named for it.\u003c\/li\u003e\n\u003cli\u003ePress work releases parts suddenly. Wear eye protection and keep out of the line of the ram.\u003c\/li\u003e\n\u003cli\u003eCheck every fastener is tight and the jack is seated square before the first press.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA sensible first press for a shed that has outgrown the hammer-and-socket method. Confirm the footprint suits your bench area before ordering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFor returns due to change of mind, a 20% restocking fee will be applied\u003c\/strong\u003e\u003c\/p\u003e\u003cimg title=\"V379-10TSHPPRSS\" alt=\"V379-10TSHPPRSS\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V379-10TSHPPRSS\"\u003e\u003cimg title=\"V379-10TSHPPRSS\" alt=\"V379-10TSHPPRSS\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V379-10TSHPPRSS\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54265734332743,"sku":"V379-10TSHPPRSS","price":132.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10884041277767.png?v=1783972495"},{"product_id":"20-ton-hydraulic-shop-press-workshop-jack-stand-bending-tool","title":"20 Ton Hydraulic Shop Press Workshop Jack Stand Bending Tool","description":"\u003cp\u003eTruck bushes, heavy trailer hubs and bent shafts stop responding to a light press fairly quickly. Doubling the tonnage is what gets them moving again. The supplier rates this H-frame at 20 Ton, quoting roughly 44,000 lbs alongside it on the same sheet, and lists the assembled weight at 52 kg. Everything on it is worked by hand.\u003c\/p\u003e\u003ch2\u003eEight table heights instead of a handful\u003c\/h2\u003e\u003cp\u003eThe worktable drops into eight positions, and that granularity is the practical difference on a big press. With 125 mm of ram travel to work with, bringing the table up close means the whole stroke goes into the actual pressing instead of being spent closing a gap. On a seized bush that matters. You want the ram loaded early and moving slowly, not running out of travel halfway through with the part still stuck fast.\u003c\/p\u003e\u003ch2\u003eMade for repeat work rather than one job\u003c\/h2\u003e\u003cp\u003eA dual-tension spring system pulls the ram back between presses, so the cycle runs pump, press, release, reset without anyone touching the ram. The cylinder is a bottle jack driven by a hand pump, which means no air line, no power point and nothing to fail but seals. Frame and press plates are both powder-coated steel, finished in black and red. The listed jobs are bearing installation, straightening, bending and part removal.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 Ton stated capacity:\u003c\/strong\u003e the supplier's own rating, also quoted as approximately 44,000 lbs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEight-position worktable:\u003c\/strong\u003e more height settings for matching the job to the stroke.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual tension return springs:\u003c\/strong\u003e the ram resets itself between presses.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand pump operation:\u003c\/strong\u003e no compressed air or electrical supply required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowder-coated steel throughout:\u003c\/strong\u003e frame and press plates both coated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressing force:\u003c\/strong\u003e 20 Ton (supplier also states approximately 44,000 lbs)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRam stroke:\u003c\/strong\u003e 125 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking table:\u003c\/strong\u003e 8 adjustable height positions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame construction:\u003c\/strong\u003e powder-coated steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePress plates:\u003c\/strong\u003e powder-coated steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn springs:\u003c\/strong\u003e dual tension system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation:\u003c\/strong\u003e manual hand pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCylinder type:\u003c\/strong\u003e hydraulic bottle jack\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e black \/ red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal weight:\u003c\/strong\u003e 52 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Fiernero (Trade Hero Australia)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall frame dimensions:\u003c\/strong\u003e not published by the supplier\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 x hydraulic shop press\u003c\/li\u003e\n\u003cli\u003e2 x press plates\u003c\/li\u003e\n\u003cli\u003e1 x bottle jack\u003c\/li\u003e\n\u003cli\u003e1 x handle\u003c\/li\u003e\n\u003cli\u003e2 x return springs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSafety and setup checks\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNo overall height, width or throat dimensions are published. At 52 kg this is not a frame you reposition on a whim, so measure the spot first.\u003c\/li\u003e\n\u003cli\u003eBoth the 20 Ton rating and the 44,000 lbs figure are the supplier's; no test standard is named for either.\u003c\/li\u003e\n\u003cli\u003eStand clear of the line of the ram and wear eye protection. Pressed parts let go without warning.\u003c\/li\u003e\n\u003cli\u003eConfirm the jack is seated square and all fasteners are tight before loading the frame.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe right size where a lighter frame stalls. Check floor space and overhead clearance before ordering.\u003c\/p\u003e\u003cp\u003eFor returns due to change of mind, a 20% restocking fee will be applied.\u003c\/p\u003e\u003cimg title=\"V379-20TSHOPPRS\" alt=\"V379-20TSHOPPRS\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V379-20TSHOPPRS\"\u003e\u003cimg title=\"V379-20TSHOPPRS\" alt=\"V379-20TSHOPPRS\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V379-20TSHOPPRS\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54265735217479,"sku":"V379-20TSHOPPRS","price":183.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10884041965895.png?v=1783972495"},{"product_id":"anti-slip-diy-car-universal-x-slot-jack-pad-rubber-frame-rail-a","title":"Anti-slip DIY Car Universal X-Slot Jack Pad Rubber Frame Rail A","description":"\u003cp\u003eFeatures:\u003cbr\u003eCross Slotted Jack pad is made of high quality rubber, strong enough to bear the weight of the car, soft and portable to avoid damage to the car chassis.\u003cbr\u003eRubber jack Pad has two types of slots, which can be used flexibly for wide and narrow frame rails. In addition, cross-slotted design and non-slip design to ensure the safety of lifting vehicles during repair.\u003cbr\u003eWhen lifting the car, the rubber block provides extra grip, reduces slipping and stabilizes. It also protects the painted or coated suspension components.\u003cbr\u003eThis is a unique design product that integrates the advantages of market products and it is easy to carry, especially suitable for DIY vehicles.\u003cbr\u003eMaximum load: 3 tons, Diameter: 10cm\/3.93in. Thickness: 4.75cm\/1.86in.\u003cbr\u003eSpecification:\u003cbr\u003eCondition: 100% New\u003cbr\u003eBlack Color\u003cbr\u003eMaterial: Rubber\u003cbr\u003eQuantity: 1pc\u003cbr\u003eSize: 10x10x4.75cm(3.9x3.9x1.85in), See the picture for details.\u003cbr\u003eNote:\u003cbr\u003ePlease allow 0-1cm error due to manual measurement. Please make sure you do not mind before bidding.\u003cbr\u003eDue to the difference between different monitors, the picture may not reflect the actual color of the item. Check it out!\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Jack Pad\u003cbr\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eReturns, Refunds and Replacements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDelivery Timeframe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:\u003c\/p\u003e\n\n\u003cimg title=\"V1237-ZY-203-3321\" alt=\"V1237-ZY-203-3321\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1237-ZY-203-3321\"\u003e\u003cimg title=\"V1237-ZY-203-3321\" alt=\"V1237-ZY-203-3321\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1237-ZY-203-3321\u0026amp;rid=42873\"\u003e\u003cul\u003e\n  \u003cli\u003eFor customers in Victoria, approximately 7-10 working days;\u003c\/li\u003e\n  \u003cli\u003eFor customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;\u003c\/li\u003e\n  \u003cli\u003eFor customers in WA, NT, and TAS, approximately 9-12 working days.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54265809404231,"sku":"V1237-ZY-203-3321","price":47.96,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10884078797127.png?v=1783977869"},{"product_id":"universal-car-x-slot-rubber-jack-pad-rail-anti-slip-diy","title":"Universal Car X-Slot Rubber Jack Pad Rail Anti-slip DIY","description":"\u003cp\u003e \u003c\/p\u003e\u003cul\u003e\u003cli\u003eFeatures:\u003cbr\u003eCross Slotted Jack pad is made of high quality rubber, strong enough to bear the weight of the car, soft and portable to avoid damage to the car chassis.\u003cbr\u003eRubber jack Pad has two types of slots, which can be used flexibly for wide and narrow frame rails. In addition, cross-slotted design and non-slip design to ensure the safety of lifting vehicles during repair.\u003cbr\u003eWhen lifting the car, the rubber block provides extra grip, reduces slipping and stabilizes. It also protects the painted or coated suspension components.\u003cbr\u003eThis is a unique design product that integrates the advantages of market products and it is easy to carry, especially suitable for DIY vehicles.\u003cbr\u003eMaximum load: 3 tons, Diameter: 10cm\/3.93in. Thickness: 4.75cm\/1.86in.\u003cbr\u003eSpecification:\u003cbr\u003eCondition: 100% New\u003cbr\u003eBlack Color\u003cbr\u003eMaterial: Rubber\u003cbr\u003eQuantity: 1pc\u003cbr\u003eSize: 10x10x4.75cm(3.9x3.9x1.85in), See the picture for details.\u003cbr\u003eNote:\u003cbr\u003ePlease allow 0-1cm error due to manual measurement. Please make sure you do not mind before bidding.\u003cbr\u003eDue to the difference between different monitors, the picture may not reflect the actual color of the item. Check it out!\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Jack Pad\u003cbr\u003e\u003cp\u003e\u003cstrong\u003eReturns, Refunds and Replacements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDelivery Timeframe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:\u003c\/p\u003e\n\n\u003cul\u003e\n  \u003cli\u003eFor customers in Victoria, approximately 7-10 working days;\u003c\/li\u003e\n  \u003cli\u003eFor customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;\u003c\/li\u003e\n  \u003cli\u003eFor customers in WA, NT, and TAS, approximately 9-12 working days.\u003c\/li\u003e\n\u003c\/ul\u003e \u003cbr\u003e\n\u003c\/li\u003e\u003c\/ul\u003e\u003cimg title=\"V1188-TSCJ-72240\" alt=\"V1188-TSCJ-72240\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1188-TSCJ-72240\"\u003e\u003cimg title=\"V1188-TSCJ-72240\" alt=\"V1188-TSCJ-72240\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1188-TSCJ-72240\u0026amp;rid=42873\"\u003e\u003cp\u003e \u003c\/p\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54265903284551,"sku":"V1188-TSCJ-72240","price":44.55,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10884145840455.png?v=1784012834"},{"product_id":"stop-hand-cranking-trailer-jack-drill-adapter-effortless-electric-lift-for-standard-universal-trailer-jacks-perfect-for-rv-boat-trailers-red","title":"Stop Hand Cranking! Trailer Jack Drill Adapter - Effortless Electric Lift for Standard \u0026 Universal Trailer Jacks, Perfect for RV \u0026 Boat Trailers (Red)","description":"\u003cp\u003e\u003cstrong\u003eTrailer Jack Drill Adapter Tool  1-Inch Drive Handle for Electric Drills, Heavy-Duty Steel with Key Ring, Red (Red) \u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUpgrade your trailer setup with this c\u003cstrong\u003eompact and powerful Trailer Jack Drill Adapter Tool\u003c\/strong\u003edesigned to transform any standard electric drill into a high-speed trailer jack crank. Engineered for truck drivers, farmers, construction crews, and anyone who works with multiple trailers, this adapter drastically reduces manual effort when raising or lowering heavy-duty trailers. Simply insert the 1-inch hex drive into your trailer jacks shaft, secure it with the built-in pin, and attach to a 1\/2-inch or 3\/8-inch cordless drill or impact driver. The result? Up to 10x faster operation than hand-cranking, saving time and energy on every job. Made from solid steel with an anodized red finish, it resists rust and wear in harsh outdoor environments. Its durable CNC-machined fit ensures precise alignment and smooth rotation. The included key ring makes it easy to carry and storeperfect for toolboxes, glove compartments, or work belts. Whether you're loading a dump trailer, adjusting a flatbed, or servicing livestock haulers, this adapter delivers professional-grade performance in a portable package.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e 1-Inch Hex Drive Fit: \u003c\/strong\u003ePrecision-engineered to match standard 1-inch trailer jack shafts (25.4mm).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Compatible with Electric Tools: \u003c\/strong\u003eWorks seamlessly with most cordless drills and impact screwdrivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Heavy-Duty Steel Construction: \u003c\/strong\u003eSolid metal body with corrosion-resistant anodized coating for long life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Secure Pin Locking Mechanism: \u003c\/strong\u003ePrevents accidental disengagement during high-torque operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Compact  Portable Design: \u003c\/strong\u003eIncludes key ring for easy storage and quick access in tight spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e Not Suitable for Pneumatic Tools:\u003c\/strong\u003eDesigned only for electric drills and impact drivers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Do Not Overload: \u003c\/strong\u003eAvoid using with extremely heavy loads beyond trailer jack capacity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Keep Clean and Dry: \u003c\/strong\u003eWipe after use to prevent dirt buildup and maintain smooth function.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e Store in a Dry Place:\u003c\/strong\u003eProtect from moisture to extend lifespan of the metal components.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e For Adult Use Only: \u003c\/strong\u003eRequires proper handling; not intended for children or inexperienced users.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReturns, Refunds and Replacements\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProducts that are received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with the Australian Consumer Law (ACL). We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. However, please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDelivery Timeframe\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePlease note that we cannot guarantee the exact date of arrival, and the delivery timeframes (excluding weekends and public holidays) are as follows:\u003c\/p\u003e\n\u003cp\u003eFor customers in Victoria, approximately 7-10 working days;\u003c\/p\u003e\n\u003cp\u003eFor customers in NSW, SA, ACT, and QLD, approximately 9-12 working days;\u003c\/p\u003e\n\u003cimg title=\"V1107-CS-TCQJDZ\" alt=\"V1107-CS-TCQJDZ\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1107-CS-TCQJDZ\"\u003e\u003cimg title=\"V1107-CS-TCQJDZ\" alt=\"V1107-CS-TCQJDZ\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V1107-CS-TCQJDZ\u0026amp;rid=42873\"\u003e\u003cp\u003eFor customers in WA, NT, and TAS, approximately 9-12 working days.\u003c\/p\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54266008797511,"sku":"V1107-CS-TCQJDZ","price":34.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10884212556103.png?v=1784021796"},{"product_id":"permanent-magnetic-lifter-600-kg-pulling-capacity-heavy-duty-n42-neodymium-lifting-magnet-with-release-handle-and-steel-hook-used-in-shop-crane-and-hoist-for-lifting-plate-steel-board","title":"Permanent Magnetic Lifter, 600 kg Pulling Capacity, Heavy Duty N42 Neodymium Lifting Magnet with Release Handle and Steel Hook, Used in Shop Crane and Hoist, for Lifting Plate Steel, Board","description":"\u003cp\u003eGetting a steel plate off a stack with slings means threading webbing under an edge that is flat on the deck. A permanent magnetic lifter picks it straight up off the face instead — flick the lever, the magnet grabs, flick it back and the plate lets go.\u003c\/p\u003e\u003ch2\u003eWhat the 600 kg figure actually describes\u003c\/h2\u003e\u003cp\u003eThe supplier's wording is worth reading exactly as written: up to 1320 lbs \/ 600 kg of magnetic force, with a 2.0 security factor. That is a pulling force with a safety factor declared against it — it is not stated as a safe working load, and no separate working load limit appears anywhere in the supplied information. The two are different things on any magnetic lifter, so treat 600 kg as the supplier's stated pulling force and nothing more. Nor does the supplier state the plate thickness, surface finish, flatness or air gap that figure was measured at, all of which change how hard a magnet holds.\u003c\/p\u003e\u003ch2\u003eTwo catches between you and an accidental release\u003c\/h2\u003e\u003cp\u003eAccidental release is the failure mode that matters with a magnet, and this one puts two things in the way. The chrome-plated handle will not rotate at all until a security button on it is pressed, so a knock against a rack or a sleeve catching the lever does not drop the load. Behind that, a lock pin holds the handle at its set position. The throw itself is simple — turn left to engage, right to release — and the grip is rubber-wrapped, which is what lets you shift a stiff lever with gloves on.\u003c\/p\u003e\u003ch2\u003eThe U-shaped base widens the job list\u003c\/h2\u003e\u003cp\u003eA flat pole face only ever suits sheet. The base on this one is cut in a U, so it seats on round stock as well as flat plate — bar, rod, pipe and billet all sit into the channel instead of touching along a single tangent line. That is the difference between a magnet that lives on the plate rack and one that gets used across a fabrication shop. The supplier lists power, mining, transport and general engineering work, lifting plates, rods, blocks and pipes, with a shop crane or hoist doing the actual lifting.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eStated pulling force:\u003c\/strong\u003e up to 1320 lbs \/ 600 kg with a 2.0 security factor, quoted exactly as the supplier gives it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eN42 neodymium magnet:\u003c\/strong\u003e a permanent magnet, so it holds without power and does not release if a battery or lead fails.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecurity button on the handle:\u003c\/strong\u003e the lever will not turn until the button is pressed, which rules out a knock releasing the load.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLock pin:\u003c\/strong\u003e holds the handle where you set it, engaged or released.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eU-shaped pole base:\u003c\/strong\u003e takes round bar, rod and pipe as well as flat plate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChrome-plated hook and handle:\u003c\/strong\u003e plating resists rust and wipes clean after a dusty shift.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic \/ pulling force:\u003c\/strong\u003e up to 1320 lbs \/ 600 kg (supplier's figure)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecurity factor:\u003c\/strong\u003e 2.0 as stated by the supplier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe working load:\u003c\/strong\u003e not stated by the supplier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet material:\u003c\/strong\u003e N42 neodymium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e permanent magnetic lifter, manual lever switching\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching:\u003c\/strong\u003e turn left to engage, turn right to release\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle:\u003c\/strong\u003e chrome-plated with security button and rubber wrap\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHandle lock:\u003c\/strong\u003e built-in lock pin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook:\u003c\/strong\u003e chrome-plated heavy-duty steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase profile:\u003c\/strong\u003e U-shaped, suits flat sheet and round steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntended use:\u003c\/strong\u003e attaches to a shop crane or hoist for lifting steel plate, rod, block and pipe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest surface conditions for the rated force:\u003c\/strong\u003e not stated by the supplier\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePermanent magnetic lifter with release handle and hook\u003c\/li\u003e\n\u003cli\u003eOne pair of protective gloves\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCautions worth reading first\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe 600 kg \/ 1320 lb figure is a pulling force, not a safe working load, and the supplier does not publish a working load limit. Get a written working load limit from the supplier before you use it to plan a lift.\u003c\/li\u003e\n\u003cli\u003eNever lift over people and never let anyone stand under or reach beneath a suspended load.\u003c\/li\u003e\n\u003cli\u003eMagnet grip falls away on thin, rough, curved, painted, scaled or hot material, and the supplier does not state the surface conditions its rating was measured on. Test the specific material before committing to a lift.\u003c\/li\u003e\n\u003cli\u003eNo standard, certification or test rating is named by the supplier for this lifter.\u003c\/li\u003e\n\u003cli\u003eStrong neodymium magnets can interfere with pacemakers and other implanted medical devices, and with nearby electronics. Keep clear if that applies to you or anyone in the area.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA quick way to shift plate and bar without rigging slings every time. Nail down the working load limit with the supplier first, then let the crane do the lifting.\u003c\/p\u003e\u003cimg title=\"V952-UXYCXP1320LBKV1QU001V0\" alt=\"V952-UXYCXP1320LBKV1QU001V0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-UXYCXP1320LBKV1QU001V0\"\u003e\u003cimg title=\"V952-UXYCXP1320LBKV1QU001V0\" alt=\"V952-UXYCXP1320LBKV1QU001V0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-UXYCXP1320LBKV1QU001V0\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54266244038983,"sku":"V952-UXYCXP1320LBKV1QU001V0","price":222.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10884284809543.png?v=1784036802"},{"product_id":"forklift-lifting-hook-6000-lbs-capacity-forklift-lifting-hoist-swivel-hook-mobile-crane-forklift-attachments","title":"Forklift Lifting Hook 6000 LBS Capacity Forklift Lifting Hoist Swivel Hook Mobile Crane Forklift Attachments","description":"\u003cp\u003eA forklift moves pallets. The moment the load is a pump on a skid or a bundle of pipe that needs to hang, forks are the wrong tool. This attachment slides over the forks and gives you a swivelling hook instead — no crane hire, no rigging the load onto a pallet that was never made for it.\u003c\/p\u003e\u003ch2\u003eThe two capacity figures on this listing do not agree\u003c\/h2\u003e\u003cp\u003eThis needs saying plainly rather than buried. The product title advertises 6000 lb. The supplier's own description, in a section headed 4,400 lb Load Capacity, states the hook allows you to lift loads up to 4400 lbs. Those are two different ratings for the same item and they cannot be reconciled from the information supplied, so both appear here labelled for what they are: 6000 lb is the title figure, 4400 lb is the figure in the supplier's product text. Confirm the rating in writing before you plan a lift, and work to the lower figure until you have.\u003c\/p\u003e\u003ch2\u003eSlides over the forks, clamps with T-screws\u003c\/h2\u003e\u003cp\u003eFitting takes a minute and no tools beyond your hands. The frame uses a double-fork design with pockets that drop over both pallet forks, then T-screws wind down to clamp it so it cannot walk forward under a swinging load. Because the pockets are not fixed to one spot, the hook can be positioned anywhere along the fork length to suit the load and the carriage width. The hook itself swivels a full 360 degrees with no stop, so a load can be turned to line up with a doorway or a truck bed, and a safety latch closes the throat so slings cannot jump off.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo conflicting ratings:\u003c\/strong\u003e 6000 lb in the title, 4400 lb in the supplier's description — both published here, neither confirmed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble-fork pockets:\u003c\/strong\u003e load spreads across both forks rather than hanging off one tine.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-screw clamps:\u003c\/strong\u003e hand-tightened, so the frame cannot creep forward when a load swings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360-degree swivel hook:\u003c\/strong\u003e no rotation stop, so a load can be turned to line up with the opening it has to go through.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety latch:\u003c\/strong\u003e closes the hook throat and keeps slings and chains seated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowder-coated carbon steel:\u003c\/strong\u003e a coated finish holds up better than bare steel in a yard or wash-down area.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity, title figure:\u003c\/strong\u003e 6000 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity, supplier's description figure:\u003c\/strong\u003e 4400 lb\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e carbon steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e powder-coated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e double-fork pocket design, slides over pallet forks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClamping:\u003c\/strong\u003e T-screws, adjustable along the fork length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook:\u003c\/strong\u003e swivel, 360-degree rotation, no stop\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHook safety device:\u003c\/strong\u003e latch across the throat\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions, weight and fork pocket sizes:\u003c\/strong\u003e not stated by the supplier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoad centre and derating information:\u003c\/strong\u003e not stated by the supplier\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCheck these before you hook up a load\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTwo capacity figures are published for this item and they conflict. Work to 4400 lb, the lower of the two, until the supplier confirms a rating in writing.\u003c\/li\u003e\n\u003cli\u003eHanging a load from a hook moves the load centre forward and downward compared with a pallet on the forks. Check your machine's own load chart — the truck's rating, not the hook's, is usually what limits the lift.\u003c\/li\u003e\n\u003cli\u003eNever lift or carry people on a forklift attachment, and keep everyone clear of a suspended load.\u003c\/li\u003e\n\u003cli\u003eFork pocket dimensions are not published. Measure your forks before ordering, and make sure the T-screws clamp down hard onto them before the first lift.\u003c\/li\u003e\n\u003cli\u003eNo standard, certification or test rating is named by the supplier for this attachment.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA simple way to turn a forklift into a pick-and-place machine for awkward loads. Settle the capacity question with the supplier, check it against your truck's load chart, and rig from there.\u003c\/p\u003e\u003cimg title=\"V952-2TCCDGJ0000000001V0\" alt=\"V952-2TCCDGJ0000000001V0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-2TCCDGJ0000000001V0\"\u003e\u003cimg title=\"V952-2TCCDGJ0000000001V0\" alt=\"V952-2TCCDGJ0000000001V0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-2TCCDGJ0000000001V0\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54266314588487,"sku":"V952-2TCCDGJ0000000001V0","price":142.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10884307484999.png?v=1784038316"},{"product_id":"10-ton-porta-power-kit-portable-hydraulic-jack-with-4-6-ft-1-4-m-oil-hose-auto-body-frame-repair-kit-with-storage-case-for-car-repair-truck-farm","title":"10 Ton Porta Power Kit, Portable Hydraulic Jack with 4.6 ft\/1.4 m Oil Hose, Auto Body Frame Repair Kit with Storage Case for Car Repair, Truck, Farm","description":"\u003cbody\u003e\r\n\u003cimg title=\"V952-F10TPAPUNBR70YJJIV0\" alt=\"V952-F10TPAPUNBR70YJJIV0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-F10TPAPUNBR70YJJIV0\"\u003e\u003cimg title=\"V952-F10TPAPUNBR70YJJIV0\" alt=\"V952-F10TPAPUNBR70YJJIV0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-F10TPAPUNBR70YJJIV0\u0026amp;rid=42873\"\u003e\r\n\r\n\u003cmeta charset=\"UTF-8\"\u003e\r\n\u003cmeta name=\"viewport\" content=\"width=device-width, initial-scale=1.0\"\u003e\r\n\u003ctitle\u003eProduct Features\u003c\/title\u003e\r\n\r\n\r\n\u003cdiv class=\"features - container\"\u003e\r\n\r\n\u003cdiv class=\"feature - card\"\u003e\r\n\u003ch3 class=\"feature - heading\"\u003eLong Handle\u003c\/h3\u003e\r\n\u003cp class=\"feature - text\"\u003eThe long handle can ensure you low pumping effort when you are at work. It is easy to use; easy to assemble. And leakless design makes the work more safe.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"feature - card\"\u003e\r\n\u003ch3 class=\"feature - heading\"\u003e55 inch Oil Tube\u003c\/h3\u003e\r\n\u003cp class=\"feature - text\"\u003eThe high quality oil tube is extended to 55 inch\/1.4 m. Long enough to makes your operation more convenient and high performance can also be achieved.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"feature - card\"\u003e\r\n\u003ch3 class=\"feature - heading\"\u003eHeavy Duty\u003c\/h3\u003e\r\n\u003cp class=\"feature - text\"\u003eThick and solid construction ensure long-term service life and stability. Contains all heavy duty equipment needed for lifting, pushing pulling, bending, straightening \u0026amp; spreading.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"feature - card\"\u003e\r\n\u003ch3 class=\"feature - heading\"\u003eMultiple Use\u003c\/h3\u003e\r\n\u003cp class=\"feature - text\"\u003eUsed for automotive, truck, farm and heavy equipment repair. Perfect for a variety of autobody repair, frame repair and construction jobs.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003cdiv class=\"feature - card\"\u003e\r\n\u003ch3 class=\"feature - heading\"\u003eCarrying Case\u003c\/h3\u003e\r\n\u003cp class=\"feature - text\"\u003eThe whole hydraulic jack body tool kit is compact and complete for the best working performance. The portable case is included for easy storage. You can carry the tool kit more easily.\u003c\/p\u003e\r\n\u003c\/div\u003e\r\n\r\n\u003c\/div\u003e\r\n\r\n\u003c\/body\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54266324910407,"sku":"V952-F10TPAPUNBR70YJJIV0","price":224.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/4wd_10884316430663.png?v=1784038365"},{"product_id":"x-bull-exhaust-jack-recovery-jack-air-bag-multi-layer-truck-rescue-kit-4x4-4wd-10-units","title":"X-BULL Exhaust Jack Recovery Jack Air Bag Multi Layer Truck Rescue Kit 4x4 4WD 10 Units","description":"\u003cp\u003eBogged to the axles in soft sand, a bottle jack just screws itself into the ground. An exhaust jack works the other way: a nylon bag under the chassis inflates off your own tailpipe, spreading its footprint as it fills so the load pushes down over a wide area instead of a single small pad.\u003c\/p\u003e\u003ch2\u003eOne minute of idling and it is up\u003c\/h2\u003e\u003cp\u003eThere is no pumping and no jack handle. The supplied inflation joint clamps to the tailpipe, 6 m (20 ft) of exhaust hose runs back to the bag, and the supplier says filling takes about a minute. That hose length is the useful part — long enough to reach a rear bag from a front pipe, or to keep whoever is operating it well away from the vehicle as it rises. Drive is listed as manual, meaning there is no pump or compressor in the kit: engine exhaust is the only air source, so the vehicle has to be running.\u003c\/p\u003e\u003ch2\u003eWhere a rigid jack has nothing to push against\u003c\/h2\u003e\u003cp\u003eThe supplier's claim here is specific: the jack works on hard ground and on sand, mud and snow. That is the whole reason it exists. A rigid jack needs a firm base and a flat pad; a bag does not care, because it grows to fill the space between the ground and the chassis and takes its bearing from whatever surface it lands on. Two protective blankets come in the kit to sit between the bag and the vehicle, which is what stops it sliding off a rounded chassis rail or catching on an exhaust bracket. Material is 1000 denier nylon.\u003c\/p\u003e\u003ch2\u003eSold as ten units\u003c\/h2\u003e\u003cp\u003eThis listing is a ten-unit pack, not a single jack — the title, the supplier's SKU and the closing line all say ten. That makes it a fleet or club buy: recovery outfits, tag-along tour operators, mine site vehicle pools, resellers. One caveat on the contents, and it is the supplier's ambiguity rather than ours: the pack list is written in the singular, for one jack with one bag, hose, joint, gloves, glue, two blankets and two patches. Whether every accessory is supplied ten times over is not stated. Ask before you order if the accessory count matters.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 tons per stand:\u003c\/strong\u003e the supplier states 5 tons (11000 lbs) capacity per stand, which is the basis quoted — per unit, not per pack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTailpipe inflation:\u003c\/strong\u003e no pump, no compressor and no jack handle; the engine does the work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 m (20 ft) exhaust hose:\u003c\/strong\u003e enough reach to keep the operator away from the vehicle while it lifts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1000 denier nylon:\u003c\/strong\u003e a heavy woven bag that copes with grit and rough ground rather than a thin bladder.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo protective blankets per kit:\u003c\/strong\u003e sit between bag and chassis so it cannot slide off a rail or snag a bracket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.6 kg:\u003c\/strong\u003e light enough to live in a recovery bag alongside the tracks and the snatch strap.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity per stand:\u003c\/strong\u003e 5 tons (11000 lbs), as stated by the supplier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e high tenacity 1000 denier nylon\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInflation:\u003c\/strong\u003e tailpipe exhaust\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrive:\u003c\/strong\u003e manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExhaust hose length:\u003c\/strong\u003e 6 m (20 ft)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight figure given by the supplier:\u003c\/strong\u003e listed as minimum height 31.5 inch (800 mm). The supplier gives no maximum lift height, and does not explain how 800 mm can be a minimum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 3.6 kg (the supplier does not state whether this is per jack or per pack)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFill time:\u003c\/strong\u003e about 1 minute, as stated by the supplier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack quantity:\u003c\/strong\u003e 10 units\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e5T exhaust air jack\u003c\/li\u003e\n\u003cli\u003eStorage bag\u003c\/li\u003e\n\u003cli\u003eExhaust pipe\u003c\/li\u003e\n\u003cli\u003eInflation joint\u003c\/li\u003e\n\u003cli\u003eGloves\u003c\/li\u003e\n\u003cli\u003eGlue\u003c\/li\u003e\n\u003cli\u003eTwo protective blankets\u003c\/li\u003e\n\u003cli\u003eTwo patches\u003c\/li\u003e\n\u003cli\u003eSupplied as a 10-unit pack; the supplier does not state whether each accessory is included ten times\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSafety — read before use\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAn exhaust jack lifts, it does not hold. Once the wheel or chassis is up, support the vehicle on rated stands or solid blocking and confirm they are carrying the weight before anyone goes underneath.\u003c\/li\u003e\n\u003cli\u003eThe 5 tons figure is per stand, quoted as the supplier states it. Do not add the ten units together, and do not read it as a rating for the pack.\u003c\/li\u003e\n\u003cli\u003eKeep everyone clear while the bag inflates. A bag can shift or roll out from under a chassis as it grows, and it lets go quickly if it is punctured.\u003c\/li\u003e\n\u003cli\u003eClear sharp edges, exhaust brackets and hot components from the contact area, and use the supplied blankets between the bag and the vehicle.\u003c\/li\u003e\n\u003cli\u003eThe engine has to run to inflate it, so exhaust gas is being pushed around the vehicle. Keep out of the fumes and never do this in an enclosed space.\u003c\/li\u003e\n\u003cli\u003eNo standard, certification or test rating is named by the supplier for these jacks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRecovery gear for the ground where a conventional jack is useless. Buy it as a pack for a fleet, and pair every one with a set of rated stands.\u003c\/p\u003e\u003cimg title=\"V211-AUEB-XBAT004X10\" alt=\"V211-AUEB-XBAT004X10\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V211-AUEB-XBAT004X10\"\u003e\u003cimg title=\"V211-AUEB-XBAT004X10\" alt=\"V211-AUEB-XBAT004X10\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V211-AUEB-XBAT004X10\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54266628440391,"sku":"V211-AUEB-XBAT004X10","price":2999.0,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/hf_20260715_082906_a2daf4d7-bf08-4fe5-bfa5-84bba6d1bab7.png?v=1784104219"},{"product_id":"pipe-jack-stand-v-head-foldable-legs-2500lb-max-height-52","title":"Pipe Jack Stand V-Head Foldable Legs 2500LB Max. Height 52\"","description":"\u003cp\u003eThreading a long length of pipe with the free end propped on a milk crate is how workshop jobs turn into repairs. This folding tripod takes that end at working height and cradles it in a V-head while you work.\u003c\/p\u003e\u003ch2\u003eA V-head finds the centre of round stock\u003c\/h2\u003e\u003cp\u003eFlat pads let pipe roll; the V-shaped head seats it between two faces so it settles instead of wandering. The supplier lists it for pipe from 1\/8 in to 12 in (0.32 to 30.48 cm), which covers conduit, water pipe and heavier structural round. Three legs spread the load and a strut tension plate ties them together for lateral support, which matters the moment a grinder catches.\u003c\/p\u003e\u003ch2\u003eHeight set by a locking ring\u003c\/h2\u003e\u003cp\u003eThe column adjusts from 28 in to 52 in (71 to 132 cm), so the head comes level with a saw table or bench rather than being packed up on offcuts. One hand stays on the pipe while the other works the ring. Legs fold in and the handle is rubber-covered, so it stows in a corner between jobs.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel construction:\u003c\/strong\u003e the supplier describes it as resistant to rust and corrosion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTripod base:\u003c\/strong\u003e widened, rounded footpads and a strut tension plate for sideways support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocking ring:\u003c\/strong\u003e height changes without tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFolding legs, rubber grip:\u003c\/strong\u003e stores flat, carries in one hand.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated load:\u003c\/strong\u003e up to 1134 kg \/ 2500 lb as stated by the supplier; basis not stated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight range:\u003c\/strong\u003e 28 in to 52 in (71 to 132 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe size range:\u003c\/strong\u003e 1\/8 in to 12 in (0.32 to 30.48 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHead type:\u003c\/strong\u003e V-head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBase:\u003c\/strong\u003e folding tripod\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore you load it\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThis is a pipe support stand, not a vehicle axle stand. Nothing in the supplier information rates it to hold a vehicle, so never put it under a car, ute or 4WD.\u003c\/li\u003e\n\u003cli\u003eThe capacity is a single maximum figure with no stated basis. Treat it as the limit for this one stand and confirm it with the supplier.\u003c\/li\u003e\n\u003cli\u003eSet the legs on level, solid ground and check the locking ring is engaged before letting go of the pipe.\u003c\/li\u003e\n\u003cli\u003eNo standard, certification or test rating is stated for this stand.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA steady second pair of hands for pipe threading, hole cutting, roll grooving and welding work.\u003c\/p\u003e\u003cimg title=\"V952-GJ1107SGJ-VX00001V0\" alt=\"V952-GJ1107SGJ-VX00001V0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-GJ1107SGJ-VX00001V0\"\u003e\u003cimg title=\"V952-GJ1107SGJ-VX00001V0\" alt=\"V952-GJ1107SGJ-VX00001V0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-GJ1107SGJ-VX00001V0\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54266694500679,"sku":"V952-GJ1107SGJ-VX00001V0","price":76.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/hf_20260715_094435_f8e1f16a-02c9-4d5a-9aa8-2393ededd778.png?v=1784108746"},{"product_id":"electric-winch-recovery-12v-13500lb-6125kg-electric-truck-winch-with-handle-and-wireless-remote-control-13500lb-6125kg-electric-truck-winch-with-92-ft-strong-steel-cable","title":"Electric Winch Recovery 12v 13500Lb \/ 6125Kg,Electric Truck Winch with Handle and Wireless Remote Control,13500Lb \/6125Kg Electric Truck Winch with 92 ft Strong Steel Cable","description":"\u003cp\u003eBogged to the axles on a beach track with the tide coming in, what matters is a winch that keeps pulling at a crawl without cooking itself. This 12 V unit runs a 4.85 kW motor through a three-stage planetary gearbox.\u003c\/p\u003e\u003ch2\u003eThree gear stages, not one\u003c\/h2\u003e\u003cp\u003eA 265:1 reduction split across three planetary stages spreads load over multiple gear sets instead of one pair of teeth. That is what lets a winch sit on a long, slow pull, the kind that walks a loaded ute out of soft sand in stages. Rated load capacity is 13,500 lb, which the supplier states as 6,123.5 kg; no basis is given for whether that is single-line or double-line.\u003c\/p\u003e\u003ch2\u003eTwo ways to control it from a safe distance\u003c\/h2\u003e\u003cp\u003eBoth a wireless handset and a corded remote come in the box. The wireless lets the operator watch the line from outside the danger zone; the corded unit is the fallback when a handset battery dies mid-trip. A four-way roller fairlead guides the 3\/8 in (9.5 mm) steel cable in from off-centre angles instead of dragging it over a sharp edge.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 V operation:\u003c\/strong\u003e runs off the vehicle's own electrical system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e265:1 gear ratio:\u003c\/strong\u003e deep reduction built for controlled recovery, not line speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual remotes:\u003c\/strong\u003e wireless handset plus wired controller.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated load capacity:\u003c\/strong\u003e 13,500 lb (supplier states 6,123.5 kg); basis not stated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMotor power:\u003c\/strong\u003e 4.85 kW (the supplier also quotes 6.8 hp)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGear ratio:\u003c\/strong\u003e 265:1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGear train:\u003c\/strong\u003e 3-stage planetary\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable diameter:\u003c\/strong\u003e 3\/8 in (9.5 mm), steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1 x electric winch\u003c\/li\u003e\n\u003cli\u003e1 x four-way roller fairlead\u003c\/li\u003e\n\u003cli\u003e1 x wireless remote controller\u003c\/li\u003e\n\u003cli\u003e1 x wired remote controller\u003c\/li\u003e\n\u003cli\u003e1 x hook\u003c\/li\u003e\n\u003cli\u003e1 x shackle\u003c\/li\u003e\n\u003cli\u003e1 x gloves\u003c\/li\u003e\n\u003cli\u003e1 x set of bolts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore you mount it\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe rating is a line pull figure, not a statement of what vehicle weight this winch can recover.\u003c\/li\u003e\n\u003cli\u003eCable length is left out of the specifications because the supplier gives two different lengths. Confirm it before planning a recovery around reach.\u003c\/li\u003e\n\u003cli\u003eMount only to a plate and vehicle structure rated for the load, and pull from rated recovery points.\u003c\/li\u003e\n\u003cli\u003eKeep clear of the cable under tension and never step over a loaded line.\u003c\/li\u003e\n\u003cli\u003eNo standard, certification or test approval is stated for this winch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCheck your mounting and recovery points before the first pull.\u003c\/p\u003e\u003cimg title=\"V952-13500LBSJP0000001V0\" alt=\"V952-13500LBSJP0000001V0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-13500LBSJP0000001V0\"\u003e\u003cimg title=\"V952-13500LBSJP0000001V0\" alt=\"V952-13500LBSJP0000001V0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-13500LBSJP0000001V0\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54266700792135,"sku":"V952-13500LBSJP0000001V0","price":536.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/hf_20260715_094833_0ab887f0-c883-4b86-a566-bed44977e5aa.png?v=1784108981"},{"product_id":"telescoping-extension-ladder-16-5ft-multi-button-retraction-419-lbs","title":"Telescoping Extension Ladder 16.5FT Multi-button Retraction 419 LBS","description":"\u003cp\u003eStoring a full-length extension ladder is the problem most people actually have. It lives on the garage wall, in the way, all year. This one collapses from 16.5 ft to roughly 3 ft, so it stands in a corner or rides flat in a ute tray.\u003c\/p\u003e\u003ch2\u003eLocks on every section, not just the top\u003c\/h2\u003e\u003cp\u003eEach rung level carries its own locking switch, so the ladder can be set part-extended for a job needing three metres rather than the full five, and the section underfoot locks independently of those above it. Retraction runs through the same multi-button arrangement, letting sections come down one at a time instead of dropping in a rush.\u003c\/p\u003e\u003ch2\u003eAluminium, with wider rungs than most\u003c\/h2\u003e\u003cp\u003eStiles and connectors are both aluminium, light enough that one person can carry the ladder fully extended. Rungs are widened to 3 in (7.6 cm), giving the arch of your foot something to sit on. Width is really a fatigue question: twenty minutes on a narrow round bar is what makes people come down early or start shifting their weight badly. The supplier rates the ladder to 419 lb.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndependent rung locks:\u003c\/strong\u003e set intermediate heights, not just fully open or closed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 in wide rungs:\u003c\/strong\u003e more foot support for longer stints up top.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAluminium throughout:\u003c\/strong\u003e light enough to move while extended.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCollapses to about 3 ft:\u003c\/strong\u003e stores in a cupboard, boot or ute tray.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated capacity:\u003c\/strong\u003e 419 lb, stated by the supplier in pounds only; basis not stated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended height:\u003c\/strong\u003e 16.5 ft (about 5.03 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetracted height:\u003c\/strong\u003e about 3 ft (about 0.91 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRung width:\u003c\/strong\u003e 3 in (7.6 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e aluminium, with aluminium connectors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore your first climb\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCheck every section has clicked into its lock before putting weight on the ladder, and check again after any height change.\u003c\/li\u003e\n\u003cli\u003eThe 419 lb figure comes without saying whether it covers the climber alone or the climber plus tools and materials. Work well inside it.\u003c\/li\u003e\n\u003cli\u003eStand the feet on firm, level ground, away from soft, wet or sloping surfaces.\u003c\/li\u003e\n\u003cli\u003eNo ladder standard, certification or test rating is stated, so confirming suitability for workplace use sits with the buyer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eA sensible choice where storage space is the real constraint: gutters, ceiling work and roof access.\u003c\/p\u003e\u003cimg title=\"V952-SSLTQLHJK16509O6XV0\" alt=\"V952-SSLTQLHJK16509O6XV0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-SSLTQLHJK16509O6XV0\"\u003e\u003cimg title=\"V952-SSLTQLHJK16509O6XV0\" alt=\"V952-SSLTQLHJK16509O6XV0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-SSLTQLHJK16509O6XV0\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54266702856519,"sku":"V952-SSLTQLHJK16509O6XV0","price":222.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/hf_20260715_095445_512a5334-3c50-474f-93b2-084d3679c207.png?v=1784109353"},{"product_id":"electric-winch-4536-kg-load-capacity-nylon-rope-winch-ip67-8-9-mm-x-25-9-m-atv-winch-with-wireless-handheld-remote-hawse-fairlead-for-towing-jeep-off-road-suv-truck-car-trailer-boat","title":"Electric Winch, 4536 kg Load Capacity Nylon Rope Winch, IP67 8.9 mm x 25.9 m ATV Winch with Wireless Handheld Remote \u0026 Hawse Fairlead for Towing Jeep Off-Road SUV Truck Car Trailer Boat","description":"\u003cp\u003eSolo recoveries are where cheap winch gear shows its limits. You need to watch the rope and work the controls from somewhere that is not directly beside it. This 12 V winch pairs a three-stage planetary gearbox with a handheld wireless remote.\u003c\/p\u003e\u003ch2\u003eWhy the gearbox matters more than the motor\u003c\/h2\u003e\u003cp\u003eA three-stage planetary set passes load through three sets of gears in series, so no single mesh carries the whole reduction. That keeps the winch pulling steadily through the long, slow drags recovery work actually consists of: inching a bogged quad out of a creek crossing rather than delivering one short yank. It draws from the existing 12 V battery, so there is no extra supply to mount.\u003c\/p\u003e\u003ch2\u003eNylon rope and a hawse fairlead\u003c\/h2\u003e\u003cp\u003eThe drum is spooled with 8.9 mm nylon rope, 25.9 m of it, and a hawse fairlead is supplied rather than a roller assembly, that being the flat, open type normally paired with synthetic line. The rope carries no separate rating, so the winch figure is the only one to work to. An IP67 ingress rating is claimed, which is the relevant question for anything bolted to the front of a vehicle that crosses water.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless handheld remote:\u003c\/strong\u003e operate from up to 66 ft (about 20 m), clear of the rope.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3-stage planetary gearing:\u003c\/strong\u003e load spread across three gear sets for sustained slow pulls.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 V DC:\u003c\/strong\u003e wires into an existing vehicle or ATV electrical system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHawse fairlead supplied:\u003c\/strong\u003e matched to the synthetic line on the drum.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated load capacity:\u003c\/strong\u003e 4,536 kg, as stated by the supplier; basis not stated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 12 V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRope:\u003c\/strong\u003e nylon, 8.9 mm x 25.9 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGear train:\u003c\/strong\u003e 3-stage planetary\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote range:\u003c\/strong\u003e 66 ft (about 20 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIngress protection:\u003c\/strong\u003e IP67, as stated by the supplier\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore the first recovery\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe capacity figure is a pull rating, not the weight of vehicle this winch suits recovering, and the supplier does not say whether it applies on a single or double line.\u003c\/li\u003e\n\u003cli\u003eMount to a plate and vehicle structure rated for the load, and pull only from rated recovery points.\u003c\/li\u003e\n\u003cli\u003eKeep bystanders out of line with the rope whenever it is loaded.\u003c\/li\u003e\n\u003cli\u003eBeyond the IP67 claim, no standard, certification or test approval is stated for this winch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSupplier detail on this listing is thin, so ask us if there is a figure you need that is not above.\u003c\/p\u003e\u003cimg title=\"V952-DDHCSJPHCSYCY6JRBV9\" alt=\"V952-DDHCSJPHCSYCY6JRBV9\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-DDHCSJPHCSYCY6JRBV9\"\u003e\u003cimg title=\"V952-DDHCSJPHCSYCY6JRBV9\" alt=\"V952-DDHCSJPHCSYCY6JRBV9\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-DDHCSJPHCSYCY6JRBV9\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54266709901639,"sku":"V952-DDHCSJPHCSYCY6JRBV9","price":561.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/hf_20260715_100441_7285d700-5f8b-4c37-b2d7-c57bdbbacecf.png?v=1784109952"},{"product_id":"12-ton-hydraulic-jack-air-pump-lift-ram-body-frame-porta-power-repair-kits","title":"12 Ton Hydraulic Jack Air Pump Lift Ram Body Frame Porta Power Repair Kits","description":"\u003cbody\u003e\n\u003cimg title=\"V952-F12TPAPUNBR70Y6LPV0\" alt=\"V952-F12TPAPUNBR70Y6LPV0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-F12TPAPUNBR70Y6LPV0\"\u003e\u003cimg title=\"V952-F12TPAPUNBR70Y6LPV0\" alt=\"V952-F12TPAPUNBR70Y6LPV0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-F12TPAPUNBR70Y6LPV0\u0026amp;rid=42873\"\u003e\n\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cmeta name=\"viewport\" content=\"width=device-width, initial-scale=1.0\"\u003e\n\u003ctitle\u003eProduct Features\u003c\/title\u003e\n\n\n\n\u003cdiv class=\"features - container\"\u003e\n\u003cdiv class=\"feature - card\"\u003e\n\u003ch3 class=\"feature - heading\"\u003eLong Handle\u003c\/h3\u003e\n\u003cp class=\"feature - text\"\u003eThe long handle can ensure you low pumping effort when you are at work. It is easy to use; easy to assemble. And leakless design makes the work more safe.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"feature - card\"\u003e\n\u003ch3 class=\"feature - heading\"\u003eCarrying Case\u003c\/h3\u003e\n\u003cp class=\"feature - text\"\u003eThe whole hydraulic jack body tool kit is compact and complete for the best working performance. The portable case is included for easy storage. You can carry the tool kit more easily.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/body\u003e","brand":"4wdstore.au","offers":[{"title":"Standard","offer_id":54266713309511,"sku":"V952-F12TPAPUNBR70Y6LPV0","price":246.99,"currency_code":"AUD","in_stock":false},{"title":"Premium","offer_id":54296158372167,"sku":"V952-FLDTJ12ABSTPUZ0B7V0","price":267.9,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/hf_20260715_101621_2c5a02ea-9d35-4940-9f65-ae1c21aa81cb.png?v=1784110647"},{"product_id":"strut-spring-compressor-4-5-ton-9920-lbs-hydraulic-jack-capacity-1-ton-rated-compression-force-auto-strut-coil-spring-compressor-tool-hydraulic-spring-compressor-for-strut-spring-removing","title":"Strut Spring Compressor, 4.5 Ton\/9920 LBS Hydraulic Jack Capacity, 1 Ton Rated Compression Force, Auto Strut Coil Spring Compressor Tool, Hydraulic Spring Compressor for Strut Spring Removing","description":"\u003cbody\u003e\n\u003cimg title=\"V952-ZXJZDHCZQJTYYH9F2V0\" alt=\"V952-ZXJZDHCZQJTYYH9F2V0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-ZXJZDHCZQJTYYH9F2V0\"\u003e\u003cimg title=\"V952-ZXJZDHCZQJTYYH9F2V0\" alt=\"V952-ZXJZDHCZQJTYYH9F2V0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-ZXJZDHCZQJTYYH9F2V0\u0026amp;rid=42873\"\u003e\n\n\u003cmeta charset=\"UTF-8\"\u003e\n\u003cmeta name=\"viewport\" content=\"width=device-width, initial-scale=1.0\"\u003e\n\u003ctitle\u003eProduct Features\u003c\/title\u003e\n\n\n\n\u003cdiv class=\"features - container\"\u003e\n\u003cdiv class=\"feature - card\"\u003e\n\u003ch3 class=\"feature - heading\"\u003e4.5 Ton Hydraulic Load Capacity\u003c\/h3\u003e\n\u003cp class=\"feature - text\"\u003eThe hydraulic jack has a 4.5 ton load capacity, and the rated compression force is 1 ton. Our coil spring compressor is great for various vehicle types, including sedans, SUVs, off-road vehicles, and pickup trucks. Perfectly suited for spring disassembly and shock absorber maintenance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"feature - card\"\u003e\n\u003ch3 class=\"feature - heading\"\u003ePremium Material Construction\u003c\/h3\u003e\n\u003cp class=\"feature - text\"\u003eThe hydraulic jack boasts a leak-proof hydraulic pump and a dampened hydraulic rod for seamless lifting and lowering. The Q235 reinforced steel column and the ductile cast iron clasps provide unparalleled durability to withstand extreme pressures, ensuring heavy-duty springs without risk of breakage or bending.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003c\/body\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54266714456391,"sku":"V952-ZXJZDHCZQJTYYH9F2V0","price":228.99,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/hf_20260715_101250_77b6d3ee-fba8-4565-a859-d48aead47a3e.png?v=1784110439"},{"product_id":"power-puller-come-along-winch-2-ton-4409-lbs-heavy-duty-pull-hoist-2-hooks","title":"Power Puller Come Along Winch 2 Ton 4409 lbs Heavy Duty Pull Hoist 2 Hooks","description":"\u003cp\u003eA strainer post, a stubborn stump, a car that has to move ten metres with a dead battery. These are jobs needing serious pulling force where there is no power within cooee. A ratchet power puller is the manual answer: steel cable, a gear set, and a handle you work back and forth.\u003c\/p\u003e\u003ch2\u003eRatchet gearing does the work your arms can't\u003c\/h2\u003e\u003cp\u003eThe mechanism is a one-piece dual-gear structure, both gears formed as a single unit rather than separate parts that can drift out of mesh. The supplier's stated reason is fewer jams and less rust in the gear train. Force multiplication comes from the ratio between the extended handle and the drum, so a comfortable one-handed stroke builds tension no amount of hauling on a rope would match.\u003c\/p\u003e\u003ch2\u003eHolds the load between strokes\u003c\/h2\u003e\u003cp\u003eAn anti-reverse mechanism catches the drum at the end of each stroke, so cable cannot run back and the tension you built stays built. That is what makes a puller usable on your own: stop, reposition your feet, start again, without losing ground. Both hooks carry spring latches across the throat, so a slackened chain will not drop off while you reset.\u003c\/p\u003e\u003ch2\u003eKey features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e12 ft (3.66 m) steel cable:\u003c\/strong\u003e twisted multi-strand construction.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnti-reverse mechanism:\u003c\/strong\u003e holds tension between handle strokes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo latched hooks:\u003c\/strong\u003e spring latches on both ends.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended handle:\u003c\/strong\u003e one-handed operation with a rubberised grip.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRated capacity:\u003c\/strong\u003e 4,409 lb \/ 2 T, as stated by the supplier; basis not stated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable length:\u003c\/strong\u003e 12 ft (3.66 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable type:\u003c\/strong\u003e multi-strand steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGearing:\u003c\/strong\u003e integrated one-piece dual gear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHooks:\u003c\/strong\u003e 2, both with spring latches\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBefore you put tension on it\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe supplier describes this tool for pulling: vehicle recovery, shifting heavy objects. No rating is stated for overhead lifting or suspending a load, so do not hold anything above people and never work under a load it is holding.\u003c\/li\u003e\n\u003cli\u003eThe 4,409 lb \/ 2 T figure comes with no stated basis and applies to this puller alone. A working load limit is never shared, added or averaged across two units.\u003c\/li\u003e\n\u003cli\u003eInspect the cable for kinks, flattening and broken strands before every use, and stay out of the line's path in case it lets go.\u003c\/li\u003e\n\u003cli\u003eNo standard, certification or test rating is stated for this puller.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWorth keeping in the ute for the jobs that come up once a year and cannot wait for a tow truck.\u003c\/p\u003e\u003cimg title=\"V952-GSSKJXQGSS2TN513MV0\" alt=\"V952-GSSKJXQGSS2TN513MV0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-GSSKJXQGSS2TN513MV0\"\u003e\u003cimg title=\"V952-GSSKJXQGSS2TN513MV0\" alt=\"V952-GSSKJXQGSS2TN513MV0\" style=\"display:none\" src=\"https:\/\/services.dropshipzone.com.au\/admin\/api\/public\/images\/logo.png?sku=V952-GSSKJXQGSS2TN513MV0\u0026amp;rid=42873\"\u003e","brand":"4wdstore.au","offers":[{"title":"Default Title","offer_id":54266756694343,"sku":"V952-GSSKJXQGSS2TN513MV0","price":37.99,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0992\/3955\/9495\/files\/hf_20260715_112411_800f3365-5fc7-4db2-92a6-475623929e47.png?v=1784114727"}],"url":"https:\/\/4wdstore.au\/collections\/lifts-jacks-hoists.oembed?page=3","provider":"4wdstore.au","version":"1.0","type":"link"}